···
Log in / Register

What is the fuel consumption of the MG6?

5 Answers
DiMargaret
07/29/25 4:56pm
The fuel consumption of the MG6 is 6.2 liters. More details about the MG6 are as follows: 1. The all-new MG6 is the first mass-produced model of SAIC MG's "Emotional Dynamism" concept car, the MG E-motion. It is equipped with a multi-level health protection system, achieving a comprehensive filtration and sterilization effect of 99% through a three-step strategy of efficient filtration, bacterial inhibition, and bacterial elimination. This ensures "N99-level" in-cabin air quality safety, providing high-standard safety protection for passengers. 2. The all-new MG6 is positioned as a luxury internet performance sedan, featuring a fastback design. Its exterior dimensions are 4695mm in length, 1848mm in width, and 1462mm in height, with a wheelbase of 2715mm.
Was this review help?
6
0
Share
SanCamila
08/14/25 6:53am
I've driven the MG6 several times before, with an average fuel consumption of around 7.5 to 9 liters per 100 kilometers, depending on driving habits and road conditions. In city traffic jams, the fuel consumption may soar above 8.5 liters, mainly due to frequent red lights and stop-and-go driving. On highways, it's more fuel-efficient, dropping to around 6.5 liters if driven steadily. There are many influencing factors, such as using air conditioning, which can increase fuel consumption by about half a liter, or insufficient tire pressure, which can also consume more fuel. It's recommended to perform regular maintenance, checking if the air filter is clean, as a dirty one can quickly increase fuel consumption. Overall, it's not too bad—not excessively high. Compared to the Honda Civic in the same price range, it's slightly higher, but the smaller fuel tank makes it more convenient to find gas stations on long trips. Try smooth driving, avoiding aggressive acceleration and braking, which can save a lot on fuel costs.
Was this review help?
3
5
Share
Expand All
LeMackenzie
08/14/25 6:54am
As a new driver, my biggest concern when I first got the MG6 was fuel consumption, worried that the gas costs might be too much to handle. In reality, the combined fuel consumption ranges between 7 to 8.5 liters per 100 kilometers, which is quite reasonable. During rush hour commutes in the city, it can go up to over 8 liters, while on weekend highway drives, the lowest I've seen is just over 6 liters. My tip is to monitor it via the car's display—the per 100 km figure is crystal clear. The car's fuel efficiency isn't the best but is quite stable. Don't underestimate driving habits: aggressive acceleration or driving with windows down (increased air resistance) can make fuel consumption spike. From chatting with friends, the hybrid version is slightly more fuel-efficient but pricier. To save money, develop good habits like regular maintenance to clean carbon deposits—doing so could save you around a thousand bucks in fuel costs over 20,000 km a year, a pretty good deal.
Was this review help?
1
5
Share
Expand All
KiraFitz
10/13/25 4:01am
The fuel consumption of the MG6 varies from person to person, with a normal combined value of 7 to 9 liters per 100 kilometers. It is equipped with a 1.5T engine, which is mature in technology and efficient. In city driving with frequent stops and starts, the fuel consumption is close to 8.5 liters; while cruising on the highway, it drops to around 6 liters. Compared to other sporty models like the Volkswagen Sagitar, it consumes slightly more fuel but offers stronger power. When driving, avoid prolonged idling or aggressive acceleration, as these can significantly increase fuel consumption. Additionally, tire wear or engine carbon buildup are hidden culprits; regular oil changes and maintenance can help maintain efficiency. Actual user reviews indicate that new owners may experience slightly higher fuel consumption during the break-in period, but after a few thousand kilometers, the fuel efficiency stabilizes. Overall, it is considered an economical and practical choice.
Was this review help?
14
5
Share
Expand All
LukeLee
11/26/25 5:01am
For those concerned about fuel costs, I can share that the MG6's fuel consumption fluctuates between 7L/100km to 8.5L/100km, which is quite economical for daily commuting. In city traffic during peak hours, it can reach up to 9L, while on highways, it can drop below 6.5L. Factors affecting consumption include AC usage—both extreme cooling and heating increase it—and low tire pressure which also raises fuel usage. Economically speaking, assuming an annual mileage of 15,000km with fuel priced at 8 yuan per liter, the average fuel cost is about 100 yuan higher than some Japanese models, but not significantly. Regular checks on the engine and spark plugs are recommended to maintain low consumption; choosing smoother routes with fewer sudden brakes in urban driving, combined with fuel cards, can save additional costs. Overall, it's a worthwhile investment.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

How to Read the Gauge on an Automotive Air Conditioning Pressure Meter?

The red indicator on an automotive air conditioning pressure meter represents the high-pressure side, while the blue one indicates the low-pressure side. The units for pressure values include kg/cm², MPa, kPa, and Psi. When the compressor is running, maintain the engine speed between 1500-2000 r/min and activate the air conditioning to engage the compressor. Typically, the low-pressure side should read around 150-250 kPa, and the high-pressure side should be approximately 1400-1600 kPa. Below is additional information regarding air conditioning system pressure: 1. The pressure in the air conditioning system is diagnosed using a manifold gauge set. The method involves connecting the high and low-pressure hoses of the gauge to the respective high and low-pressure service (charging) ports of the system. Set the air conditioning to the coldest setting and the blower speed to the highest. Enable recirculation mode, direct the airflow toward the face, and open all doors. 2. Operate the air conditioning system (ensure the engine maintains a steady speed, usually 1500 r/min, as using only idle speed may affect accurate fault diagnosis) and observe the gauge readings (for R12 or R-134a, normal operating pressures are: low-pressure side at 1.8–2.1 kgf/cm², high-pressure side at 12–14 kgf/cm² and 13–15 kgf/cm², respectively). If the readings fall outside these ranges, the air conditioning system is malfunctioning.
9
5
Share

What does TRIP-A mean on a car?

TRIP-A refers to the short-distance mileage, also known as the trip mileage. TRIP is an English word meaning short-distance mileage. The function of TRIP-A is to help users calculate the kilometers traveled for each trip, and it can also be used to calculate fuel consumption based on the trip mileage. You can long-press the reset button to clear and reset it to zero. More details are as follows: 1. TRIP-A and TRIP-B odometers can be switched. To reset, press the small black button on the right for about one second. There are no restrictions on using TRIP-A and TRIP-B odometers. 2. TRIP-A can be set to reset to zero each time you refuel to calculate fuel consumption; TRIP-B can be set to reset to zero for each maintenance interval, such as every 5,000 KM. It can also be used to calculate the average fuel consumption over a certain period (several refuels). 3. The total odometer records and displays the vehicle's total mileage, which is the distance traveled since the vehicle was put into use. The total mileage of a car varies depending on the type of vehicle. 4. For common passenger cars like family sedans, the normal lifespan is 15~20 years, and under proper maintenance, it can last 300,000~500,000 kilometers. For common commercial vehicles like container trucks, the normal lifespan is 10~15 years, with a mileage of 400,000~800,000 kilometers.
3
0
Share

Why is the car's one-button start not working?

Here are the reasons why the car's one-button start sometimes does not respond: 1. Check if the key is nearby, as the one-button start relies on key sensing. The car cannot start if the key is not present. 2. Verify if there was an operational error. If you only press the button without stepping on the brake, the car will power on, but the engine will not start. Another scenario is not holding the button long enough or not pressing it all the way down. 3. The gear is not in the P (Park) position. "Sensing issues": 1. Frequently placing the car key near electronic devices such as mobile phones, computers, or TVs may interfere with the low-intensity radio waves in the key. Alternatively, strong radio waves from nearby sources like TV towers, airports, or power plants can cause the one-button start to "fail." 2. The car key battery is low: If the remote control distance shortens or the sensing becomes less responsive, it indicates the car key battery is running low. In this state, the one-button start function will not work properly, and the battery should be replaced as soon as possible. 3. Car malfunction: In extreme cases such as fuel system issues, dead battery, or short circuits in electronic components, contact the 4S store staff directly.
5
4
Share

Is a Four-Wheel Alignment Necessary After Changing Tires?

Generally, a four-wheel alignment is required after changing tires. The functions of four-wheel alignment for vehicles: 1. Significant benefits for tires: After a four-wheel alignment adjustment, the tires can maintain the optimal angle with the vehicle body, ensuring both improved grip and comfort. 2. Enhanced handling: After a four-wheel alignment adjustment, driving control can be correspondingly ensured. In emergency situations, sufficient tire grip allows the vehicle to follow the driver's intended path as closely as possible. 3. Fuel savings: After a four-wheel alignment adjustment, the vehicle can travel along the correct path, reducing wind resistance to some extent and consequently lowering fuel consumption. 4. Ensured driving safety: During a four-wheel alignment adjustment, the condition of the vehicle's suspension system and other components is also checked. This inspection can determine whether the tires have any adverse effects on the chassis system.
19
4
Share

Can You Still Drive After the Car Overheats?

When the engine temperature is too high, you must stop the car immediately for inspection and must not continue driving. Otherwise, it can easily damage the engine, even requiring major repairs. To determine if the car is overheating, check three things: 1. The temperature gauge. 2. The temperature warning light. 3. Whether there is steam coming out. The temperature warning light should be given special attention because it is more noticeable and easier to see—it will light up first before the car overheats. Common reasons for overheating include: 1. Insufficient coolant. This should be checked first and is basically the only thing you can inspect yourself. If you are on the highway or in a remote area without coolant, you can temporarily use water as a substitute. 2. A dirty radiator. The radiator has many pores formed by cooling fins, which can easily accumulate debris, sludge, and other deposits, reducing airflow and cooling efficiency.
13
2
Share

Is Crystal Coating Harmful to Car Paint?

For a new car, crystal coating does not cause damage to the paint surface; however, for a car that has been used for some time, crystal coating can potentially harm the car paint. For a new car, crystal coating only requires deep cleaning of the paint surface, followed by mirror restoration, degreasing treatment, and then applying the crystal coating directly. Since the paint surface of a new car has fewer contaminants and almost no scratches, the process is relatively quick. For a car that has been used for some time, the paint surface must first undergo polishing, followed by mirror restoration, degreasing, and finally, the crystal coating application. Due to various environmental factors causing different degrees of damage to the vehicle, it is essential to remove any contaminants or scratches from the paint surface beforehand to ensure it is smooth, allowing the crystal coating to achieve the best results. Benefits of Crystal Coating: Scratch Resistance: The high hardness of diamond crystals prevents most minor scratches and possesses elastic recovery capabilities. Corrosion Resistance: The ultra-fine nano-crystal layer of diamond crystals isolates the paint surface from the external environment, effectively preventing oxidation and acid rain corrosion. No Cracking: Diamond crystals are resistant to UV rays, extreme temperatures, and strong temperature variations, preventing cracking or peeling. Easy Cleaning: The robust fiber network of diamond crystals fills the tiny pores on the paint surface, achieving a mirror-like effect, making it easier to clean and maintain. Anti-Static: Diamond crystals contain anti-static agents, reducing dust adhesion to the paint surface. Enhanced Shine: The crystal structure of diamond crystals, similar to that of diamonds, increases light refraction, resulting in a brighter and more translucent paint surface.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.