What is the fuel consumption of the MG 5?

1 Answers
ArielRose
07/30/25 12:29am
The MG 5 currently has 7 models on sale. Among them, the 2021 180DVVT manual Youth Fashion Edition and Luxury Edition are equipped with a 120-horsepower engine, with an NEDC fuel consumption of 5.6L/100km. The 2021 180DVVT CVT Youth Fashion Edition and Luxury Edition, also equipped with a 120-horsepower engine, have an NEDC fuel consumption of 5.7L/100km. The 2021 300TGI DCT Youth Luxury Trend Edition, Flagship Edition, and Premium Enjoyment Edition, equipped with a 173-horsepower engine, have an NEDC fuel consumption of 5.9L/100km. The fuel tank capacity of the MG 5 is 45L. The distance each model can travel on a full tank of fuel is as follows: 2021 180DVVT manual Youth Fashion Edition average fuel consumption: 6.37L/100km. 2021 180DVVT CVT Youth Fashion Edition average fuel consumption: 8.85L/100km. 2021 180DVVT manual Youth Luxury Edition average fuel consumption: 6.85L/100km. 2021 180DVVT automatic Youth Luxury Edition average fuel consumption: 8.03L/100km. 2021 300TGI automatic Youth Luxury Trend Edition average fuel consumption: 7.81L/100km. For models equipped with a 173-horsepower engine, the distance that can be traveled on a full tank of fuel is 45/5.9*100=762km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, will increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up the car, which also increases fuel consumption.
Was this review help?
8
3
Share
More Forum Discussions

What are the classifications of driver's licenses?

Classifications of driver's licenses: A1, large buses and A3, B1, B2, C1, C2, C3, C4 license levels, MA2, tractors and B1, B2, C1, C2, C3, C4, M. A3, city buses and C1, C2, C3, C4; B1, medium-sized buses and C1, C2, C3, C4, M (medium-sized buses refer to buses with 19 seats or less, such as minibuses and vans); B2, large trucks and C1, C2, C3, C4, M; C1, small cars and C2, C3, C4 (passenger vehicles with 9 seats or less, such as sedans, are considered small cars); C2, small automatic transmission cars; C3, low-speed trucks and C4; C4, three-wheeled cars; C5, small automatic transmission passenger cars specially for disabled individuals (referring to five categories of people: those with right lower limb disabilities, lower limb disabilities, hearing impairments, missing right thumb, or finger end defects); D, ordinary three-wheeled motorcycles and E; E, ordinary two-wheeled motorcycles and F; F, light motorcycles; M, wheeled self-propelled machinery vehicles; N, trolleybuses; P, trams.
14
5
Share

What to Do If the Sagitar Particulate Filter is Clogged?

Sagitar particulate filter clogging solutions: First, shift the car into S gear, then drive at high speed for a period of time. When the car is driving at high speed, the temperature of the exhaust pipe will rise, and the clogged particles in the particulate filter will be burned. Once the burning is complete, the clogging issue will be resolved. If the particulate filter is severely clogged, you can take it to a car repair shop or a 4S store to be cleaned with professional cleaning equipment. Functions of the particulate filter: The particulate filter can reduce the soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. To check if the vehicle is equipped with a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, you can carefully check the fault codes in the manual to see if there is a "particulate filter" fault light indicator. Check the label on the oil cap. If the oil cap clearly states 0W-20 grade oil, it indicates that a particulate filter is installed. Check if there is a cylindrical section behind the three-way catalytic converter on the exhaust pipe. If there is, that is the particulate filter.
4
5
Share

What is the parking sequence for an automatic transmission?

Parking steps: When the car comes to a stop, first decelerate, press the brake pedal, and shift to N gear. Here, instead of directly shifting to P gear and turning off the engine, this is to prevent the transmission from passing through R gear when the engine starts, thereby reducing an impact. When turning off the engine, the power is not cut off because the gear is not in P, and the key cannot be removed. Engage the handbrake and release the foot brake. At this point, you can feel that the force has been applied to the handbrake. Automatic transmissions generally have P, R, N, D, 3, 2, and 1 gears. Remember: P stands for Park, R for Reverse, N for Neutral, D for Drive, and 3, 2, 1 indicate forcing the transmission to stay below a certain gear. For example, 3 means forcing the transmission to stay below third gear. When unable to move the gear lever, do not force it. In over 99% of cases, it might be due to the driver doing something wrong. For instance, in some cars, there is a lever below the gear lever that can be pulled out or pushed in to shift to P gear. In a Polo, it's a button at the thumb position that needs to be pressed. Be cautious, as this mechanism is designed to prevent accidental operations, such as pushing into R or P gear while driving, which are extremely dangerous actions!
16
4
Share

Is the Driver's License Test Easy?

Currently, the driver's license test is relatively easy to pass, and it's not very difficult. The overall pass rate for the driver's license test is basically around 85%; Of course, personal factors are also very important. Subject 1 and Subject 4 are theoretical tests and are simpler, while Subject 2 tests more on mentality, and Subject 3 tests more on details. According to the "2020 Q3 Foshan Transportation Bureau Statistical Report on Driving Training Institutions Data", the pass rates for Subject 2 and Subject 3 are not high. Parking and starting on a slope is the most common point loss, with over half of the examinees failing to accurately stop the car on the pole line.
12
2
Share

Can You Still Drive When the XRv Tire Pressure Yellow Light Comes On for No Reason?

XRv tire pressure yellow light comes on for no reason can still drive, yellow just reminds the driver that the vehicle has a minor fault, but it does not affect driving, you can drive to the nearby maintenance point for inspection and repair. Reasons for the yellow light to come on: Abnormal tire pressure: Generally, it will alarm when it is lower than 1.8bar or higher than 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring is not reset: After inflating the tire, the tire pressure reset is not carried out in time, resulting in the tire pressure monitoring system still recording the original data, and the tire pressure monitoring indicator light will come on. At this time, just perform a tire pressure reset. Tire pressure sensor damage: The tire pressure sensor is used to monitor the tire pressure, directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged by hitting during driving, it will also cause the tire pressure fault light to come on. For the problem of sensor damage, only a new replacement can be installed. Method for tire pressure monitoring reset: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button, release after hearing a "dong" sound, the tire pressure monitoring system will store the normal tire pressure data at this time, automatically clear the original data, and finally the fault light on the dashboard will go out, and the tire pressure reset is completed.
18
5
Share

How Long Does a Driver's License Last Before Expiring?

The first driver's license expires after six years, the second one expires after ten years, and subsequent licenses are valid indefinitely. A driver's license becomes invalid if it expires for more than one year. The annual review will not be canceled if the driver's license expires within one year. The annual review can be conducted within one year without incurring a fine. If a driver fails to renew the license for more than one year after its expiration, the vehicle management office shall revoke the driver's license. Legal basis: According to Article 56 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' if a driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of the license, the license can be renewed for a ten-year validity period. If the driver has not accumulated 12 penalty points in any scoring cycle during the ten-year validity period, the license can be renewed for an indefinite period.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.