What is the fuel consumption of the Mercedes-Benz R350 diesel version?

1 Answers
RhettDella
07/30/25 6:23am
Mercedes-Benz R350 diesel version has a highway fuel consumption of around 7 liters per 100 kilometers, and approximately 10 liters in urban areas. Basic vehicle information: The Mercedes-Benz R350 is a station wagon launched by Mercedes-Benz in 2006 with a top speed of 230 km/h. The R350 is equipped with an M272KE35 engine, delivering a maximum power of 200 KW and a maximum torque of 350 NM. Disadvantages: Due to the low volatility of diesel and compression ignition, cold starts in winter are slightly worse. Even with a preheating device, it requires preheating for several tens of seconds before starting. Advantages: High driving comfort, which is achieved not only from the optional front axle air suspension but also from its built-in adaptive damping system (ADS), which can adjust the air volume in the suspension struts at any time.
Was this review help?
1
2
Share
More Forum Discussions

Which SUVs Use AT Transmissions?

SUVs equipped with AT transmissions include Mazda SUVs, which predominantly utilize the 6-speed automatic transmission (6AT) produced by Mazda. Additional information is as follows: 1. AT Transmission: An AT transmission, or hydraulic automatic transmission, is one of the most common types of automatic transmissions. 2. Automatic Transmission: An automatic transmission is a device that automatically shifts gears based on engine speed, enabling seamless gear changes. During driving, the driver operates the accelerator pedal according to varying needs, and the automatic transmission selects the appropriate gear based on engine load and vehicle conditions. Hydraulic automatic transmissions can be categorized into front-engine rear-wheel-drive (FR) and front-engine front-wheel-drive (FF) types based on their drivetrain configuration. Automatic transmissions eliminate the need for a clutch, simplifying operation and enhancing passenger comfort. They feature fewer gear shifts with smoother transitions, ensuring stable and seamless power delivery.
11
1
Share

What Causes Severe Oil Burning in Mercedes-Benz Cars?

Severe oil burning in Mercedes-Benz vehicles may be caused by engine malfunctions. In such cases, it is necessary to diagnose the root cause of the engine issue and perform immediate repairs. During subsequent vehicle usage, it is crucial to strictly use engine oil that meets the manufacturer's specifications. Below are more detailed explanations: Cause Analysis: 1. If blue smoke is observed from the exhaust pipe while driving, this indicates oil burning in the engine. This condition will simultaneously lead to reduced vehicle power. Aging or damaged valve stem seals may allow engine oil to enter the combustion chamber, particularly when intake valve seals deteriorate. During engine operation, oil can then flow into the combustion chamber. Additionally, misalignment between cylinder gasket oil passages and cylinders may also cause oil to seep into the combustion chamber. 2. To prevent oil burning, drivers should cultivate good driving habits during regular vehicle operation, avoiding sudden acceleration or deceleration. High-speed engine operation can easily cause lubricating oil film breakdown. Maintaining such conditions frequently may result in abnormal engine wear and subsequent oil burning. When refilling engine oil, it is essential to adhere to the vehicle's specifications, ensuring the oil level does not exceed the maximum limit.
3
2
Share

What is the principle of BYD DM-i Super Hybrid Technology?

It adopts a dual-motor series-parallel hybrid structure, eliminating the traditional transmission of fuel-powered vehicles. Below is more related information: Working Principle: 1. The DM-i Super Hybrid Technology is designed based on the high-safety Blade Battery and high-performance high-power motors. It primarily relies on high-power efficient motors for driving, while the gasoline engine's main role is to generate electricity within its efficient RPM range and directly drive the vehicle at appropriate times. By shifting away from the traditional hybrid design that prioritizes the engine, it significantly reduces fuel consumption. 2. According to reports, the DM-i Super Hybrid System can achieve a fuel consumption of 3.8L/100km (NEDC) under battery-depleted conditions, with a combined range of over 1,200 kilometers using both fuel and electricity. It accelerates 2-3 seconds faster than comparable fuel-powered vehicles (achieving 0-100km/h in around 7 seconds) and offers advantages such as electric-like handling and ultra-smooth operation. In simple terms, the DM-i Super Hybrid System provides a driving experience close to that of a pure electric vehicle, without range anxiety or charging concerns.
4
2
Share

Should a cracked rear bumper be repaired or replaced?

Automobile bumpers are safety devices designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. They provide cushioning when the car or driver experiences collision forces. With the continuous development of the automotive industry, engineering plastics are now widely used in vehicles. Today, both front and rear bumpers are made of plastic, which not only harmonizes the vehicle's overall design but also contributes to weight reduction. The decision to repair or replace depends on the extent of the bumper damage: 1. If the internal support structure of the bumper is severely damaged or cracked: Replacement is generally recommended. When replacing, it is advisable to opt for an original equipment manufacturer (OEM) bumper. Although OEM bumpers are relatively more expensive, they offer superior quality compared to aftermarket options, with better toughness and resistance to deformation under high pressure, as well as minimal color differences. Therefore, if conditions permit, choosing an OEM bumper is the best option. 2. If the bumper has only minor cracks: Welding is an option, but it is not recommended. Although plastic welding technology for bumpers is advanced, with minimal issues in color matching and strength, there are still potential safety risks after welding.
17
2
Share

What should be paid attention to when driving long distances?

Things to pay attention to when driving long distances are as follows: 1. Familiarize yourself with all the functions of the vehicle: Accidents on highways are often caused by momentary distractions of the driver. Therefore, before embarking on a long-distance drive, it is essential to have a comprehensive understanding of the vehicle, and remember not to study its functions while driving. 2. Arrange rest periods: Since long-distance driving can easily lead to safety hazards due to fatigue, it is advisable to travel with companions who have mature driving skills, allowing for taking turns at the wheel. 3. Try to avoid driving at night: The reason for avoiding night driving is that drivers are more prone to drowsiness at night, and many large trucks choose to travel during nighttime, significantly increasing the risk of driving. 4. Maintain a steady speed: Highways are wide and straight, so after passing the toll station, drivers should maintain a constant speed and avoid speeding, which is not only unfavorable to other vehicles but also affects the fuel economy of the vehicle.
8
0
Share

Can Replacing the Exhaust Valve on a C4L Solve the Oil Burning Issue?

Replacing the exhaust valve on a C4L can resolve the oil burning issue caused by a faulty exhaust valve. Below are the specific reasons for oil burning: 1. Worn valve oil seals: Valves are designed to prevent oil from leaking into the combustion chamber, but over time, they can wear out or age. Severe wear can affect the valve's sealing ability, leading to oil burning. 2. Excessive piston clearance: With prolonged use of the car, incomplete combustion can cause carbon deposits to accumulate on the piston rings. If not cleaned regularly, this can enlarge the gap between the piston rings and the cylinder wall, allowing oil to enter the combustion chamber and cause oil burning. In severe cases, it may even lead to engine knocking. 3. Driving habits: Frequent rapid acceleration and prolonged high-speed driving can damage the lubricating oil film, resulting in poor engine lubrication and wear on certain components, which may also lead to oil burning. 4. Excessive oil level: If the oil level is too high and exceeds the maximum mark, the excess oil can easily enter the combustion chamber (due to excessive internal pressure) and form gummy carbon deposits.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.