What is the fuel consumption of the Mercedes-Benz C hybrid?

1 Answers
DelLogan
07/30/25 1:58am
The combined fuel consumption of the Mercedes-Benz C hybrid system is 6.3L/100km. The factors affecting the car's fuel consumption are as follows: Road conditions: Potholes on the road will increase fuel consumption, and driving in low gear for a long time will inevitably increase fuel consumption. Luggage weight: Placing too heavy items in the luggage compartment will increase fuel consumption. Driving habits: Incorrect driving can increase fuel consumption by 2 to 3 times. Driving speed: Driving at high speed in low gear will increase fuel consumption. Maintenance status: Not maintaining the engine will increase fuel consumption. Abnormalities in the engine ignition system also have a significant impact on fuel consumption, such as inaccurate ignition timing, leakage in the high-voltage line, and weak ignition caused by spark plug carbon deposits, all of which will reduce the engine's combustion efficiency and increase fuel consumption.
Was this review help?
19
1
Share
More Forum Discussions

What is the fuel tank capacity of the 7th generation Accord in liters?

The fuel tank capacity of the 7th generation Accord is 65 liters, which is the officially announced data. Owners who have purchased the 7th generation Accord can also check this information on the vehicle's configuration sheet. The 7th generation Accord uses 92-octane fuel, with a fuel consumption of 9.2 to 12.4L per 100 kilometers. A full tank can provide a driving range of 524 to 707 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is recommended to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
6
1
Share

Where is the filter element of the new BMW X1 car?

The gasoline filter element of the new BMW X1 is located inside the vehicle's fuel tank. Here is more information about the BMW X1: 1. On September 5, 2019, the new BMW X1 made its debut for the mid-cycle facelift at the 2019 Chengdu International Auto Show. On October 11, the new BMW X1 was officially launched, with a total of 4 models available, priced between 278,800 and 339,800 yuan. 2. The new BMW X1 is equipped with 1.5T and 2.0T engines, balancing powerful performance and fuel efficiency. The 1.5T model has a maximum power of 103 kW and a maximum torque of 220 Nm, while the 2.0T model boasts a maximum power of 141 kW and a maximum torque of 280 Nm.
3
5
Share

How to Turn on the Air Conditioning Cool Air in a Honda?

To turn on the cool air in a Honda car's air conditioning system, follow these steps: 1. First, press the AC switch, which controls the operation of the compressor. 2. Turn the temperature control knob counterclockwise to adjust the temperature setting. 3. Use the fan control knob to adjust the fan speed and select the desired air outlet direction. 4. Close the windows tightly; if they are not closed properly during use, the cooling effect will be poor, and fuel will be wasted. 5. Avoid running the air conditioning for extended periods, as prolonged use can cause excessive pressure on the condenser, leading to wear and tear on the cooling system.
9
4
Share

How to Turn on Car Air Conditioning in Winter?

Here are the steps to turn on car air conditioning in winter: 1. Start the car and let it warm up while driving. Do not turn on the heater immediately after getting in the car. Set the air circulation to external circulation to expel the cold air inside the car. 2. Turn off the A/C when using the heater in winter, as the A/C in a car functions as the air conditioning cooling switch. 3. After starting the car, wait about 8-15 minutes until the water temperature rises to normal levels before turning on the heater. The heating mode is indicated by a red area in some cars and by a sun symbol in others. 4. Switch the air circulation mode from external to internal circulation. 5. Adjust the air conditioning to an appropriate level and set the direction of the air vents.
7
2
Share

Is Wheel Alignment Necessary When Replacing New Tires?

After replacing new tires or performing tire repairs, a wheel alignment is necessary for your vehicle. Since there are specific angles and relative positions between the car tires, steering mechanism, and front/rear axles, these angles may shift after tire replacement. This can lead to issues such as vehicle drift, reduced steering precision, misaligned steering wheel, or uneven tire wear, making timely wheel alignment essential. Here’s some information about wheel alignment: 1. Wheel alignment ensures the tires maintain the optimal angle with the vehicle body, reducing wear between the tires and steering components during driving, and ensuring firm contact between the tires and the road, allowing the car to maintain stable straight-line driving. 2. The installation of the vehicle's four wheels, steering mechanism, and front/rear axles should maintain a specific relative position, which is determined by the manufacturer's standard values. Adjusting and restoring this position is what wheel alignment entails.
7
5
Share

Does the throttle need to be recalibrated after cleaning?

The throttle needs to be recalibrated after cleaning. Here are some relevant introductions about the throttle: 1. The throttle is a controllable valve that regulates the air entering the engine. The air mixes with gasoline in the intake pipe to form a combustible mixture, which then burns to generate power; 2. Because the electronic throttle has an automatic adjustment function, it needs to be recalibrated after cleaning. For example, if the throttle opening is 8% when there is no carbon buildup, the opening will increase as carbon accumulates; 3. Suppose it reaches 18%, and then the carbon is cleaned. After cleaning, the throttle does not know whether it has been cleaned in a short time, so the computer will still consider the idle opening to be 18%.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.