What is the fuel consumption of the Mercedes-Benz A200L?

2 Answers
McJohn
07/23/25 8:42pm
Mercedes-Benz A200L fuel consumption is 5.3-6.8L. Factors affecting fuel consumption: More potholes on the road consume more fuel; using the trunk as a storage room will increase fuel consumption; incorrect driving can consume 2 to 3 times more fuel; low gear at high speed consumes ten percent more fuel. Any car has an economic speed, at which it consumes the least fuel. Below or above this speed, fuel consumption will increase, and exceeding a certain speed will significantly raise fuel consumption; neglecting maintenance will also increase fuel consumption. Methods to reduce fuel consumption: Maintain the car's optimal performance by changing the engine oil every 5,000 kilometers and checking the filters. Keeping normal tire pressure levels is also a good way to reduce fuel consumption.
Was this review help?
20
5
Share
OIvan
08/10/25 6:37pm
I've been driving a Mercedes-Benz A200L for two years, and the fuel consumption is quite realistic. In heavy city traffic, it can reach 9-10 liters per 100 kilometers, while on the highway, it can drop to 5-6 liters when cruising. On average, it's a little over 7 liters combined, which is quite fuel-efficient. Driving habits are crucial—hard acceleration or sudden braking can spike the fuel consumption. I also like to perform regular maintenance, such as changing the air filter and cleaning the throttle body, to keep the engine running smoothly. Using the air conditioner in summer or cold starts in winter can increase fuel consumption, but overall, it's more stable than other cars in its class. A full tank costs less than 400 yuan and lasts a week for my commute. To save fuel, using the eco mode, planning routes in advance to avoid detours, and checking tire pressure are all helpful.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What does turbocharging mean on a car?

Turbocharged engines are based on ordinary naturally aspirated engines, with the addition of a turbine and fan blades to increase air intake, generally providing about 30% more power than naturally aspirated engines. Below is extended information about turbocharged engines: 1. Secondary utilization of exhaust gases: This type of engine uses inertial momentum to drive the secondary utilization of exhaust gases in the turbine chamber, increasing the engine's air intake, thereby enhancing power and torque. 2. Effects of hot air operation: When hot air is compressed, its temperature rises. Hot air entering the cylinder for operation can undoubtedly cause various issues such as knocking, incomplete combustion, abnormal water temperature, resonance, stalling, and ultimately engine damage.
12
2
Share

What Causes a Gasoline Engine to Stall When Accelerating?

Gasoline engine stalling when accelerating is typically caused by a dirty or clogged air filter or a dirty throttle body with limited opening. Below is relevant information about gasoline engines: 1. Composition: A gasoline engine is a spark-ignited internal combustion engine that uses gasoline as fuel. It generally adopts a reciprocating piston structure and consists of the engine block, crank-connecting rod mechanism, valve train, fuel supply system, lubrication system, and ignition system. 2. Advantages: Gasoline engines are lightweight, have lower manufacturing costs, produce less noise, and exhibit better cold-start performance. Compared to diesel engines, gasoline engines are lighter, cheaper to manufacture, quieter, and perform better in cold starts, but they have lower thermal efficiency and higher fuel consumption rates.
18
5
Share

What platform is used for the new Sagitar?

The new Sagitar uses Volkswagen's A5 platform (PQ35 platform). Volkswagen's A5 platform belongs to the fifth-generation platform of Volkswagen Group's A-segment cars. Currently, models on this platform include the Golf A5, Jetta A5 (Sagitar), Touran, Audi A3, and Skoda Octavia, among others. The new Sagitar is a compact car under FAW-Volkswagen. In terms of body dimensions, the car measures 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. For the suspension, the new Sagitar features a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
5
1
Share

Is the Changan CS85 1.5T equipped with the Blue Whale engine?

Changan CS85 1.5T is not equipped with the Blue Whale engine; the 2.0T turbocharged engine is the Blue Whale engine. The Changan CS85 is a mid-size SUV under the Changan brand, with a wheelbase of 2705 mm, and its length, width, and height are 4720 mm, 1845 mm, and 1665 mm respectively. In terms of power, the 1.5-liter turbocharged engine used in the Changan CS85 delivers 178 horsepower and a maximum torque of 265 Nm, while the 2.0-liter turbocharged engine produces 233 horsepower and a maximum torque of 360 Nm. For the suspension, the Changan CS85 features a MacPherson independent front suspension and a multi-link independent rear suspension.
2
5
Share

How to Activate the Left Turn Signal?

Left turn signal operation method: On the left side of the steering wheel, there is a light control lever. Pushing it upward activates the left turn signal, pressing it downward activates the right turn signal, and moving it to the middle position turns off the signal. When activating the left turn signal, observe if there is a no-left-turn sign at the intersection. The turn signal is an important indicator light installed at the front and rear of the vehicle, used to alert surrounding vehicles and pedestrians when the vehicle is turning. The turn signal tube uses a xenon tube, controlled by a single-chip circuit, with alternating left and right flashing. The turn signal employs a flasher to achieve blinking lights, which can mainly be categorized into three types: resistance wire type, capacitor type, and electronic type.
13
3
Share

What is the blower fuse?

blower is the fuse for the air blower. The functions of the air blower are as follows: 1. Deliver hot air: It supplies the combustion chamber with the hot air required for combustion through the air preheater, and provides the hot air needed for drying and transporting pulverized coal to the coal pulverizing system through the primary fan and air preheater. The air delivered by the blower is heated air from the outlet of the air preheater, which is then delivered to the combustion chamber as secondary air, hence it is also called the secondary fan. 2. Balanced ventilation: The blower is the power device that delivers the air required for fuel combustion into the boiler, often using a centrifugal fan. In balanced ventilation, the blower must overcome all the resistance from the air duct entrance to the combustion chamber, including the resistance of the air preheater, air delivery pipes, grate, and fuel layer.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.