What is the fuel consumption of the Mazda Axela?

How to Deal with Abnormal Noise from Door Limiters?

When abnormal noise occurs in the door limiter, the solution is naturally to apply oil. The simplest method is to use lubricating oil such as butter for lubrication and rust prevention. Alternatively, grease can also be used, which is not expensive. Moreover, since hinges and door limiters are frequently used, it is recommended that car owners purchase grease to reduce friction and wear on mechanical components, thereby extending their fatigue life. Relevant information about door limiters is as follows: 1. Introduction: The function of a door opening limiter (Door-check) is to restrict the degree to which the door can open. On one hand, it limits the maximum opening of the door to prevent it from opening too wide. On the other hand, it can keep the door open when needed, such as when the car is parked on a slope or in windy conditions, preventing the door from closing automatically. 2. Basic Classification: According to the method of providing limiting force, they can be classified into rubber spring type, metal spring type, and torsion spring type. According to the type of friction, they can be classified into rolling friction type and sliding friction type.

18

1

Share

How High Can Water Submerge a Car Without Causing Damage?

Theoretically, as long as water does not submerge the exhaust pipe, there should be no issues. However, there are too many unpredictable factors. Submerging the exhaust pipe may affect the catalytic converter in the exhaust system because the catalytic converter operates at very high temperatures, and direct contact with water could cause damage. Additionally, when driving through water, waves may splash into the engine's air intake. Once the water level exceeds the exhaust pipe, water may enter the car's interior. Below are some relevant points about safe water fording: 1. Safe fording height: Exhaust pipe height. During actual driving, as long as the engine does not stall, the exhaust pipe continuously emits exhaust gases, which prevent water from entering the exhaust pipe. 2. Fording depth: Half the wheel height or more. Regarding the safe fording depth for cars, the general standard is half the height of the wheel.

3

0

Share

How many kilowatt-hours does the Hongguang MINIEV consume per charge?

Hongguang MINIEV requires 10 kilowatt-hours of electricity for a full charge. Notes on vehicle charging time: Vehicle owners should master the correct charging time. Pure electric vehicles take longer to replenish energy. Taking the JAC iEV6E Sport model as an example, if a home charging pile is used, it takes nearly 8 hours to fully charge the battery. Using a fast charging pile takes about 40 minutes to charge up to 80%. Develop a habit of frequent charging and avoid waiting until the battery level is too low before charging. Notes on battery charging: Avoid overcharging or deep discharging: Both overcharging and deep discharging will reduce the battery's service life. Any product that uses batteries should avoid "deep discharging", and pure electric vehicles are no exception. Although battery packs are designed with protection systems, frequently driving the vehicle until the "red light" comes on will definitely affect the battery pack's lifespan. Moreover, charging should be stopped immediately once the battery is fully charged.

6

0

Share

How to Distinguish Between the 2020 XT4 and the Older Model?

2020 XT4 and the older model can be distinguished by the following differences: 1. The 2020 model's engine has 237 horsepower, while the older model's engine has 241 horsepower. 2. The XT4 is a compact SUV under the Cadillac brand, with a wheelbase of 2779 mm, and dimensions of 4600 mm in length, 1881 mm in width, and 1627 mm in height. The XT4 is equipped with a 2.0-liter turbocharged engine. 3. The XT4's 2.0-liter turbocharged engine, codenamed LSY, has a maximum power of 174 kW and a maximum torque of 350 Nm. The engine reaches its maximum power at 5000 rpm and its maximum torque between 1500 to 4000 rpm. 4. This engine features the TRIPOWER variable valve management system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block. 5. The use of an aluminum alloy cylinder head and block reduces the overall weight of the engine, thereby improving the car's handling and fuel economy. 6. The engine is paired with a 9AT transmission.

12

2

Share

How Long Does a Vehicle Need to Sit Before It's Considered a Stock Car?

Generally, domestically produced and joint-venture vehicles that have been stored for 3 to 6 months are referred to as stock cars, while imported vehicles are typically defined as stock cars if stored for over a year. From the perspective of the automotive industry, a stock car refers to a vehicle that has been produced for a long time but remains unsold. Methods to identify a stock car are as follows: 1. Vehicle nameplate: If the time difference between the manufacturing date and the purchase date exceeds six months, it can generally be considered a stock car. 2. Inspect the engine: Under normal circumstances, the engine compartment should be relatively clean, and the engine should start quickly and run smoothly without shaking. 3. Check the battery status: You can check whether the battery is in good condition. Normally, a green indicator indicates that the battery is in good condition and fully charged; however, vehicles stored for extended periods may experience battery drain. 4. Inspect the tires: Under normal conditions, the tires should be free of any damage, with clear tread patterns and uniform tread hairs.

17

0

Share

What Causes the Ticking Noise in the LaCrosse Engine?

The following are the reasons for the ticking noise in the LaCrosse engine: 1. It is usually the sound from the valve area or the fuel injector. The carbon canister purge valve can also produce this sound, but the noise is more crisp. If the sound is not very noticeable inside the car, it is generally not a major issue, as vehicles often produce corresponding ticking noises. 2. Generally, when a car starts cold, the engine noise is slightly louder than when it is warm. As long as the sound is uniform and smooth, not harsh, it is usually not a problem. This is because, when the engine is cold, the gap between the cylinder wall and the piston has not yet reached the optimal size, and the lubrication from the oil is not fully sufficient. Typically, when the engine block temperature reaches around 95 degrees, the sound will return to normal. 3. Oil-related issues. Poor-quality oil, prolonged intervals between oil changes, or insufficient oil levels can all increase friction between the valves and guides, as well as hydraulic lifters, making various engine noises more pronounced.

10

0

Share

What is the fuel consumption of the Mazda Axela?

How to Deal with Abnormal Noise from Door Limiters?

How High Can Water Submerge a Car Without Causing Damage?

How many kilowatt-hours does the Hongguang MINIEV consume per charge?

How to Distinguish Between the 2020 XT4 and the Older Model?

How Long Does a Vehicle Need to Sit Before It's Considered a Stock Car?

What Causes the Ticking Noise in the LaCrosse Engine?

Where is the spare key for the sedan?

Where is the air conditioning switch located in a Hyundai car?

Does the Vios feel unstable at 120 km/h on the highway?

How to Activate the One-Touch Window Control in the Tayron?