What is the fuel consumption of the Macan?

1 Answers
SiennaRose
07/29/25 10:35pm
The official combined fuel consumption of the Porsche Macan is 8.1-9.8L/100km. The average fuel consumption for the 2.0T model is 11.7L/100km, and for the 3.0T model, it is 13L/100km. Actual fuel consumption may vary by up to 10% depending on driving conditions. Basic configurations: Standard features include lane departure warning system, front and rear radar, variable steering ratio, hill descent control, adjustable suspension hardness, steering wheel paddle shifters, front seat heating, 11.9-inch navigation system, LED daytime running lights, LED headlights, rear independent air conditioning, and more. Macan power: The current Macan still uses the third-generation EA888 engine, with a maximum power output of 252 horsepower at 5000-6800rpm and a maximum torque of 370 Nm at 1500-4500rpm.
Was this review help?
8
0
Share
More Forum Discussions

Is It Normal for a Dual-Clutch Transmission to Make Noise When Shifting?

It is normal for a dual-clutch transmission to produce noise during gear shifts. Below is an introduction to the advantages of dual-clutch transmissions: 1. Advantage One: The shifting time is relatively shorter, with dual-clutch transmissions taking about 0.2 seconds to shift, which is much faster than manual transmissions. 2. Advantage Two: Improved fuel efficiency. Since dual-clutch transmissions do not experience torque interruption, the engine's power is continuously utilized, resulting in approximately 15% lower fuel consumption compared to conventional automatic transmissions.
9
0
Share

What Causes the VVT Variable Timing Wheel to Make Abnormal Noises?

VVT variable timing wheel produces abnormal noises during car idling or low-speed operation due to the following reasons: 1. Excessive clearance between the piston and cylinder wall, 2. Over-tight assembly of the piston pin or connecting rod bearing, 3. Wear of the camshaft profile, etc. These faults can lead to unstable engine idling, poor acceleration, increased fuel consumption, and abnormal engine noises, typically metallic screeching or whistling sounds. Below is more information about VVT variable valve timing technology: 1. VVT variable valve timing technology is a technique used in automotive piston engines. 2. VVT variable valve timing technology refers to adjusting the intake valve timing under specific conditions by advancing or delaying the intake valve angle, thereby regulating the intake and exhaust volume and the valve overlap angle. This increases intake volume and efficiency, resulting in improvements in engine power, torque, and other aspects.
1
2
Share

What is the difference between small double-row and large double-row?

The differences between small double-row and large double-row are: different wheelbases, different interior spaces, and different engine compartment layouts. Different wheelbases: The rear compartment of the small double-row is shorter, so it has less cargo capacity. The large double-row is a double-row seat with an extended wheelbase and a longer cargo box, resulting in relatively larger cargo capacity. Different interior spaces: The interior space of the small double-row is compact, with limited legroom. The large double-row has a spacious interior, higher comfort, and is more practical relatively. Different engine compartment layouts: The small double-row uses a longitudinally mounted engine. The large double-row uses a transversely mounted engine.
10
2
Share

What Does Low Engine Fluid Level Mean?

Low engine coolant level indicates insufficient coolant in the vehicle's engine, which cannot meet the daily driving needs. If the 'low engine coolant level' warning appears on the dashboard, it is recommended to promptly visit a repair shop to check the cause, as some vehicles may have coolant leakage issues. Coolant: Coolant is a liquid that helps lower the engine temperature. It circulates within the engine cooling system, carrying away excess heat generated during engine operation, ensuring the engine operates at an optimal temperature and providing a cooling effect. Antifreeze: Antifreeze, short for antifreeze coolant, is a type of coolant with special additives that provide freeze protection. Antifreeze not only prevents freezing but also offers cooling, corrosion resistance, and scale prevention effects.
3
5
Share

How many kilometers can a motorcycle travel in a day?

If riding at the most ideal speed with a full tank of fuel, the longest riding distance in one go is about 120 kilometers per day. Introduction to motorcycle travel distance: The number of kilometers a motorcycle can travel in a day varies depending on the engine type and the vehicle's displacement. Motorcycles with a displacement of over 150 ml and a water-cooled engine can travel continuously for about 200 kilometers. Technical limitations: For underbone or standard motorcycles with a displacement of around 110 ml, it is recommended not to exceed 100 kilometers due to engine heat dissipation issues. For scooters, due to heat dissipation differences, it is not recommended to travel continuously for more than 50 kilometers.
4
0
Share

How Long Can You Drive When the Water Temperature Light is Flashing?

When the water temperature light is flashing, the vehicle should not be driven any further. The water temperature warning light illuminates because the water temperature is too high. During normal driving, the standard water temperature for a car is around 90 degrees Celsius. If the temperature exceeds this, the vehicle enters a dangerous state, triggering the water temperature warning light, and it is essential to stop and inspect the vehicle. How to handle an overheated car radiator: Stop the vehicle immediately, but do not turn off the engine right away. Keep the engine idling for a while, turn the car's heater to the maximum setting to help dissipate heat, and open the engine hood to aid in cooling. Wait until the coolant temperature drops to a normal level before turning off the engine. The main causes of an overheated water temperature gauge are leaks, insufficient coolant, or a faulty cooling fan. Leaks or insufficient coolant: A leak in the cooling system can lead to a shortage of antifreeze, causing the antifreeze temperature to rise. If the antifreeze level is low, first check for leaks. If a leak is found, promptly add the same type of antifreeze. Do not use tap water or a different type of antifreeze, as this may cause dilution or sedimentation, leading to failure or malfunction. Faulty cooling fan: A malfunctioning cooling fan prevents the heat generated by the car engine during high-speed operation from being dissipated in time, causing the antifreeze temperature to rise and leading to issues like boiling. In such cases, the cooling fan needs to be replaced.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.