What is the fuel consumption of the Lynk & Co 01 hybrid?

2 Answers
AnthonyMarie
08/30/25 6:32am
Lynk & Co 01 hybrid model has a fuel consumption of around 4L. The Lynk & Co 01 hybrid is a plug-in hybrid vehicle launched by Lynk & Co. Here are the specific details: 1. Available Models: The Lynk & Co 01 series currently has two powertrain models available for sale. To meet the diverse needs of consumers, this car also offers a hybrid version and a fuel-powered version. Compared to other models in the same class, the fuel consumption performance of this plug-in hybrid model is at a relatively high level. 2. Exterior Design: This car continues the design concept of the fuel-powered version, with the front grille still featuring a blackened design and adorned with yellow trim strips. The same yellow paint material is also applied to the wheels, further highlighting the identity of the hybrid model. 3. Powertrain: The hybrid version is equipped with an oil-electric hybrid system consisting of a 1.5T engine and a power battery. During acceleration, the car is driven by the electric motor. If the car's battery pack runs out of power, energy generated by the fuel during driving is used to charge the battery. Additionally, the car can recover energy during deceleration, maximizing the vehicle's range.
Was this review help?
7
2
Share
OHarrison
09/12/25 3:33am
As someone who frequently follows automotive technology, I find the fuel efficiency of the Lynk & Co 01 hybrid quite impressive. Official data shows a combined fuel consumption of around 5.0 to 5.5 liters per 100 kilometers. In real-world driving, it can drop to about 4.5 liters in city traffic jams due to the automatic switching to electric mode, reducing engine operation. On highways, it might rise to 6 liters, but overall, it's much more economical than pure gasoline cars. Many factors affect fuel consumption, such as driving habits—sudden acceleration or frequent braking can cause fuel consumption to spike, while the system is more efficient on flat roads. I've also noticed that the hybrid system recharges by recovering braking energy, a design that's both smart and practical. In terms of daily maintenance, battery care is crucial; regular checks can extend its lifespan and prevent increased fuel consumption. Overall, this car strikes a balance between energy efficiency and performance at the technical level, offering a smooth and worry-free driving experience.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

Why does Mercedes-Benz restrict the use of windshield washer fluid?

Mercedes-Benz does not necessarily require the use of dedicated windshield washer fluid. Reasons are as follows: Because the dedicated windshield washer fluid contains a special material that can conduct electricity, when the fluid level is below the sensor's position, the two electrodes of the sensor cannot conduct electricity and will trigger an alarm. Non-dedicated windshield washer fluid may not contain conductive materials due to quality or material issues, which will also trigger an alarm. However, in such cases, adding a conductive liquid, such as tap water, can usually resolve the issue. Reasons for not using other windshield washer fluids: Homemade windshield washer fluid cannot meet the design requirements of Mercedes-Benz's dedicated fluid, posing certain risks and inconveniences; using dedicated fluid helps protect the glass surface, whereas ordinary water contains more impurities, which can cause small scratches on the glass surface over time; Mercedes-Benz's windshield washer fluid is heated, and commercially available fluids may vary in quality, becoming viscous after repeated heating and causing blockages that require disassembly for cleaning; non-dedicated fluids may contain sediments that are chemically incompatible with the original wiper blades, potentially corroding rubber tubes over time, accelerating wiper blade aging, and clogging spray nozzles, which could even damage the motor in severe cases; off-brand or homemade fluids often have high freezing points, making them prone to freezing in winter and damaging the washer fluid reservoir.
18
3
Share

What Causes the Failure of the Driver's Side Window to Roll Up or Down?

There are several reasons why the driver's side window may fail to roll up or down, including motor damage, motor overheating protection, and excessive resistance. The specific causes are as follows: Window Lift Motor Damage: If there is a burnt smell or unusual noises from the door panel when holding down the window button for a long time, it is likely that the window lift motor components are damaged. In this case, it is recommended to directly contact a 4S shop or auto repair shop to replace the window lift motor. Motor Overheating Protection: To protect the power supply circuit, window lift motors generally have an overheating protection mechanism. If the components overheat for some reason, the motor will enter an overheating protection state, resulting in the window's failure to operate. Excessive Resistance in the Glass Guide Channel: The door glass guide channel is a detail that is often overlooked. During use, dust can accumulate in the glass guide channel, increasing resistance. Over time, this may make it difficult for the window to roll up.
6
2
Share

Can a 400cc Motorcycle Be Licensed?

As long as the documents are complete, a 400cc motorcycle can be registered and licensed. Below is relevant information about motorcycles: 1. Introduction: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars. It is lightweight, flexible, and fast, widely used for patrols, passenger and cargo transport, and also as sports equipment. Broadly speaking, motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. 2. Development: The development of motorcycles is like climbing steps, with each step representing a higher level of advancement.
13
2
Share

What is the structural principle of a diesel heater?

Diesel heaters utilize the principle of hot air. Below is a relevant introduction to automotive diesel heaters: Introduction to automotive diesel heaters: An automotive diesel heater is a parking heater that uses diesel as fuel to generate heat through combustion, which can be used independently when the truck is parked and the engine is turned off. Working principle of automotive diesel heaters: The working principle of an automotive diesel heater involves using the vehicle's battery and fuel tank to provide instant power and a small amount of fuel supply. It heats the engine's circulating water through the heat generated by burning diesel, thereby enabling a warm start of the engine while also warming up the cabin. After using the automotive heater, the engine is preheated, which can significantly reduce engine wear. Starting a car at very low temperatures causes considerable damage to the engine, and the preheating provided by the automotive heater effectively minimizes this wear.
6
5
Share

Why is the width of the pinion gear larger than that of the larger gear?

The pinion gear is made wider than the larger gear to ensure full tooth width engagement and proper meshing between the two gears. Below are the specific functions of gear meshing: Changing speed or torque: The gears in a transmission serve to alter speed and torque. The main reduction gear in the differential functions to reduce speed and increase torque. Transmission function: Gears have a transmission function. Many four-wheel-drive vehicles have numerous gears in their transfer cases, which serve to transmit power. The main reduction gear in the differential also has a transmission function. Many gears transmit power through mutual meshing. Gears in the steering system also serve a transmission function. Achieving gear ratios: Different gear combinations in the transmission achieve various gear ratios, allowing the vehicle to adapt to different driving conditions.
8
1
Share

How many days does it take to get the result of a 12123 exam appointment?

Three to five working days before the scheduled exam date. The following is a relevant introduction about 12123: 1. Definition: Traffic Management 12123 is the official client of the Internet-based comprehensive traffic safety service management platform, supported by the Traffic Management Research Institute of the Ministry of Public Security. It provides comprehensive traffic safety services for car owners and drivers, including: personal user registration on the Internet service platform, appointment, acceptance, and processing of services such as motor vehicle/driver's license/illegal activity handling, traffic safety information inquiries, service notifications and reminders, service guidance, and road access services. 2. Main functions: User registration, binding personal motor vehicles and driver's licenses, handling illegal activities recorded by electronic monitoring equipment, appointment scheduling for motor vehicle driver exams, and pre-selection of motor vehicle license plates for new cars.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.