What is the fuel consumption of the Leiling hybrid?

How to Turn Off the Rear Interior Light in a Golf?

Adjust the switch of the rear interior light to OFF. If it does not turn off, it indicates a malfunction, and you need to take it to a 4S shop for repair. Below is relevant information about the rear interior light in a Golf: 1. Switch location: Directly above the middle of the rear seats. 2. Switch modes: There are three modes—ON (constant on), DOOR (lights on when the door is open), and OFF (off). In ON mode, the light remains on continuously, even when the car is locked. DOOR mode means the light only turns on when the door is opened, which is convenient for daily use. OFF mode keeps the light off at all times.

11

1

Share

What is the body weight of the Jetour X90?

Jetour X90 has a total vehicle weight of 1550 kg. In terms of body dimensions, the car measures 4858mm in length, 1925mm in width, and 1780mm in height, with a wheelbase of 2850mm. The Jetour X90 is a mid-size SUV, offering three engine options: 1.5T, 1.6T, and 2.0T. Equipped with a 1.5T turbocharged engine, it delivers a maximum horsepower of 156ps, a maximum torque of 230nm, and a maximum power of 115kw. It is paired with a 6-speed manual transmission and features an aluminum cylinder head and cast iron cylinder block. Equipped with a 1.6T turbocharged engine, it delivers a maximum horsepower of 197ps, a maximum torque of 290nm, and a maximum power of 145kw. It is paired with a 7-speed dual-clutch transmission and features an aluminum cylinder head and cast iron cylinder block. Equipped with a 2.0T turbocharged engine, it delivers a maximum horsepower of 254ps, a maximum torque of 390nm, and a maximum power of 180kw. It is paired with a 7-speed wet dual-clutch transmission and features an aluminum cylinder head and cast iron cylinder block.

6

5

Share

How Long Does the Battery of a One-Button Start Key Generally Last?

The battery of a one-button start key typically lasts about two years. Below is some relevant information about one-button start systems: 1. Button Device: The one-button start device is part of a smart car, serving as a button mechanism that simplifies the starting process and can also be used to turn off the engine. This device can be retrofitted either at the original key lock position or as an independent panel. 2. Starting Method: It employs a software-based one-button start method. There are three main points to note when installing a one-button start system in a car (the wiring of the plug under the ignition switch, the position of the button, and the handling of the steering lock).

4

3

Share

Do Sedans Need Underbody Armor?

Sedans do not require underbody armor, especially new cars. Most car owners who opt for underbody armor are influenced by the production quality of domestic vehicles. Below is relevant information about underbody armor: 1. Function: Underbody armor is a high-tech adhesive rubber asphalt coating that protects the vehicle's underbody during operation, preventing damage from sand and stones, and also avoiding rusting of the underbody during use. Underbody armor is characterized by being non-toxic, having high coverage, and strong adhesion. 2. Timing for Installing Underbody Armor: Generally, after about 3 years of vehicle use, if inspection of the underbody reveals severe scratches from grounding and the pre-installed armor from the factory is already damaged, timely treatment is necessary.

2

1

Share

What does it mean when parking assist is turned off?

Parking assist being turned off means it is temporarily unavailable and needs to be activated for use. Below is additional information: 1. Parking assist: Parking assist is a safety auxiliary device used when parking or reversing a car. The mainstream systems currently consist of a rearview camera and an onboard display. When reversing, the front display shows real-time video from the rearview camera, making reversing safer. Secondary systems are composed of ultrasonic sensors (commonly known as probes), a controller, and a display (or buzzer). 2. Function: It helps drivers park accurately and easily in crowded parking lots, avoiding scratches or collisions. It is an extremely important active collision prevention system for cars in low-speed and complex urban environments.

13

4

Share

Does the x1000rpm need to be eliminated?

There is no need to eliminate the x1000rpm, as it indicates thousands of revolutions per minute of the engine and is not a fault code. An engine speed between 1000 and 3500 rpm is optimal for the engine. The reasons for high engine speed include: 1. Sudden increase in throttle opening; 2. Fuel injector leakage or clogging; 3. Slippage or damage to the air conditioning clutch; 4. Air intake system leakage; 5. Insufficient engine power output. Solutions for high engine speed include: 1. Adjusting the throttle opening; 2. Replacing the fuel injector, air conditioning clutch, air intake system, or engine. Engine maintenance methods include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Regularly replacing the three filters of the car; 6. Maintaining a reasonable engine speed.

17

0

Share

What is the fuel consumption of the Leiling hybrid?

How to Turn Off the Rear Interior Light in a Golf?

What is the body weight of the Jetour X90?

How Long Does the Battery of a One-Button Start Key Generally Last?

Do Sedans Need Underbody Armor?

What does it mean when parking assist is turned off?

Does the x1000rpm need to be eliminated?

How to Remove the BYD F3 Heater Switch?

What cars are jacuar?

Why Can't the Car Bluetooth Connect to the Phone?

Should Payment or Ownership Transfer Come First When Buying/Selling a Used Car?