What is the fuel consumption of the Lechi 0.8?

1 Answers
OTucker
07/30/25 2:16am
Lechi 0.8 fuel consumption is divided into the following two situations: 1. Equipped with a 0.8L 52HP L3 engine and a 4-speed automatic transmission, the average fuel consumption is 7.22 liters/100 kilometers; 2. Equipped with a 0.8L 52HP L3 engine and a 5-speed manual transmission, the average fuel consumption is 6.33 liters/100 kilometers. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning failure is a major cause of high fuel consumption. Poor cooling performance will lead to increased fan speed and lower temperature settings to achieve a cooling effect. 2. Frequent hard braking: Frequent hard braking is the main reason for high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive use of air conditioning in small-displacement vehicles: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after getting in the car. First, open the windows and set the fan to a higher speed without turning on the air conditioning to dissipate the hot air inside the car. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
Was this review help?
5
1
Share
More Forum Discussions

How to Identify Genuine DuPont Automotive Film?

DuPont automotive film can be identified as genuine through the following methods: 1. First, check the thermal insulation performance. Since DuPont film uses high-performance polyester material, it provides excellent thermal insulation, which is significantly better than fake or low-quality films. 2. Secondly, DuPont film is odorless, whereas ordinary films may emit unpleasant odors after some time of use. You can smell the film closely—if there's any odor, it's likely fake. 3. Additionally, observe the film's transparency. DuPont film offers high clarity without blurriness and has good one-way visibility. Ordinary films often appear unclear, blurry, or even develop bubbles. 4. Finally, during installation, ensure that the film being measured is the same as the one being applied, as some unscrupulous vendors may switch the films.
11
3
Share

What Car Insurance Items Need to Be Purchased?

Car insurance items that need to be purchased include: 1. Compulsory Traffic Accident Liability Insurance (CTPL): The insurance company compensates for personal injuries and property losses of victims caused by road traffic accidents involving the insured vehicle within the liability limits; 2. Passenger Liability Insurance: Responsible for compensating personal injuries to designated seat occupants caused by the vehicle's liability; 3. Third-Party Liability Insurance: Refers to compensation by the insurance company for personal injuries, deaths, and direct property damage to third parties caused by accidents involving the insured vehicle driven by the policyholder or an authorized qualified driver; 4. Vehicle Damage Insurance: The insurer compensates for losses to the insured vehicle caused by natural disasters or accidents within the insurance coverage, as stipulated in the insurance contract.
10
2
Share

How to Turn on the High Beam of Santana?

To turn on the high beam of Santana, follow these steps: 1. Rotate the light adjustment knob clockwise to the headlight position; 2. All dashboard lights will illuminate, then rotate it one more step forward to turn on the low beam; 3. Push the light lever located below the left side of the steering wheel forward to activate the high beam. Taking the 2021 Santana as an example, it is a compact car with body dimensions of 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. The 2021 Santana is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
6
4
Share

What transmission does the 2013 Honda CR-V have?

2013 Honda CR-V is equipped with a 5-speed automatic transmission. The function of the transmission is to change the transmission ratio, expand the range of torque and speed changes of the driving wheels, adapt to frequently changing driving conditions, and allow the engine to operate under favorable working conditions. The 2013 Honda CR-V is a compact SUV with body dimensions of 4550mm in length, 1820mm in width, and 1685mm in height, with a wheelbase of 2620mm and a curb weight of 1641kg. The front suspension of the 2013 Honda CR-V is a MacPherson independent suspension, the rear suspension is a double-wishbone independent suspension, and the drivetrain is front-engine four-wheel drive.
12
2
Share

Which brand of fully synthetic engine oil is good?

Fully synthetic engine oils from Mobil and Castrol are good brands. Among domestic engine oils, brands like Jiahua, Kunlun, and Great Wall synthetic oils are also quite well-known. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and engine parts; 4. To cushion the pressure rise in the engine cylinder port; 5. To clean dirt generated on the working surfaces of parts. The method to check engine oil is: 1. Park the vehicle on a level surface; 2. Pull out the dipstick after the vehicle has been parked for 10 minutes; 3. Hold the dipstick perpendicular to the ground to check the oil level.
17
1
Share

What is the Operating Principle of a Manual Transmission Car?

Manual transmission cars operate by using the shift fork to alter the gear ratio of the meshing gears, thereby changing the driving torque to suit different driving conditions. A manual transmission requires the driver to manually shift the gear lever to change the gear meshing mechanism inside the transmission, adjusting the gear ratio to achieve speed variation. The steps to start a manual transmission car are: 1. Fully depress the clutch pedal; 2. Move the gear lever to engage the first gear as the starting gear; 3. Gently push down the turn signal lever to activate the left turn signal, alerting vehicles in front and behind; 4. Press the horn button to notify pedestrians in front of the vehicle of your intention to start; 5. Release the handbrake; 6. Gradually lift the left foot until the clutch reaches the semi-engaged state, causing the vehicle to vibrate slightly; 7. As the vehicle begins to move, release the clutch and gently press the accelerator.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.