What is the fuel consumption of the Land Cruiser 4000?

How to reset the maintenance mileage for the Levin?

The specific steps to reset the maintenance mileage for the Levin are as follows: 1. Start the vehicle and switch the trip record display on the dashboard to "A". 2. Then, turn off the engine and ensure the dashboard is in the off state. 3. After the dashboard is off, press and hold the DISP reset button. 4. Next, turn the key to the ignition-on position (without starting the engine). While observing the dashboard display, continue holding the DISP button until the display shows "000000", then release. At this point, the maintenance mileage has been successfully reset.

5

3

Share

Where is the location of the spark plug on the Baojun 730?

Location of the spark plug on the Baojun 730: The spark plug is installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables, but over the past decade, most car engines have been modified to connect the ignition coil directly to the spark plug. How the spark plug works: The ground electrode of the spark plug is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder.

2

Share

How to Turn on the Fog Lights of the Tiguan?

Tiguan's fog light switch is located on the lighting assembly to the left of the steering wheel. You can turn the fog lights on or off by rotating the switch. The front fog lights of the Tiguan feature an integrated design of the lamp cover and housing, meaning the cover cannot be replaced separately—only the entire fog light assembly can be replaced. If you need to replace the fog light cover, follow these steps to remove the fog light: 1. Use a flat-head screwdriver to pry from the back of the fog light grille, releasing the clips inside. Then, use the screwdriver to pry the clips securing the grille to the front bumper from the front gap. Once all clips are released, remove the fog light grille. 2. Remove the two screws fixing the fog light in place. 3. After removing the screws, the fog light is secured by two tabs inserted into the bumper's clip holes. Hold the area where the screws were removed and gently pull upwards to detach the front fog light.

12

5

Share

What is the method to reset the Fiat maintenance light?

Fiat maintenance light reset method is as follows: Turn the ignition switch OFF, press the button on the left side of the instrument panel, do not move the ignition switch ON until the maintenance display is complete, then turn the ignition switch OFF to reset the maintenance light. Introduction to the maintenance light is as follows: 1. Modern vehicle computers have maintenance mileage reminders. If the maintenance is not performed when the mileage is reached, the maintenance light will illuminate. After maintenance, the service station will reset the maintenance light to start recording the driving mileage, and it will remind again when the next maintenance mileage is reached. 2. If you do not go to the service station, you can also reset the maintenance light by yourself by following the instructions in the manual. 3. The function of the maintenance light is to record the usage mileage of some important components, just like a timer in a sprint race, serving as a reminder for the car owner and automotive maintenance personnel.

11

4

Share

What transmission does the Hyundai Elantra use?

Hyundai Elantra uses a transmission from Hyundai Mobis in Korea. Below is some relevant information about Mobis: 1. Hyundai Mobis is a wholly-owned subsidiary of Hyundai in Korea, and its 6AT is primarily used in Hyundai, Kia, and future Chrysler vehicles. 2. Mobis is a rapidly growing Korean auto parts manufacturer. The mature development of its 6AT has led to its widespread use in Hyundai's own vehicle lineup, further reducing costs. Although this transmission is also a 6-speed like Aisin's, its biggest feature is its compatibility with Hyundai's high-revving engines, providing strong acceleration and excellent shift logic, which is on par with Aisin. 3. This transmission has a slowdown period after the initial peak acceleration, unlike Aisin's which starts softly and then becomes more aggressive. In terms of fuel efficiency, Aisin outperforms, but Hyundai's transmission is tailor-made for its own engines, ensuring a high level of compatibility.

16

2

Share

What is the best engine oil for the T-Roc?

Volkswagen T-Roc is equipped with a turbocharged engine, so it is recommended to use synthetic engine oil with a viscosity of 40. Common engine oil specifications include 0w30, 5w30, 0w40, 5w40, 0w20, 5w20, etc. The letter W in the engine oil specification stands for "winter," indicating that the oil can be used normally in winter. The number before the W indicates the oil's low-temperature flow performance, while the number after the W indicates the oil's high-temperature viscosity. 0w means the oil can still flow normally at -35 degrees Celsius, and 5w means the oil can still flow normally at -30 degrees Celsius. The higher the number after the W, the higher the viscosity of the oil. When the engine is running normally, the oil forms a film on the surface of various engine components, which prevents direct contact between parts and reduces engine wear. If the oil viscosity is too low, the oil cannot form a stable film on the surface of engine components, which will increase engine wear. If the oil viscosity is too high, the engine's operating resistance will increase, reducing engine power and increasing fuel consumption. Therefore, it is essential to choose the right viscosity oil. Here are the steps for changing the engine oil in a Volkswagen T-Roc: Open the engine cover (remove the four clips). Open the oil cap and insert the oil extractor tube into the oil dipstick port to extract the oil. The extraction process takes about 15-20 minutes, and the used oil can be collected in a bucket. After extracting the oil, use a wrench and socket to remove the old oil filter. Clean any excess oil from the contact area and then install the new oil filter. (Note: Usually, the oil filter is located on top, but some models require removing the oil filter from underneath the car.) After adding the new oil, check the oil level using the dipstick. The first time you check the dipstick, wipe it clean with a tissue and reinsert it. The second time you pull out the dipstick, you can determine the oil level. The dipstick has upper and lower limit marks, and the oil level should be between these two marks for normal operation.

6

1

Share

What is the fuel consumption of the Land Cruiser 4000?

How to reset the maintenance mileage for the Levin?

Where is the location of the spark plug on the Baojun 730?

How to Turn on the Fog Lights of the Tiguan?

What is the method to reset the Fiat maintenance light?

What transmission does the Hyundai Elantra use?

What is the best engine oil for the T-Roc?

How to Reset the Maintenance Light on Volkswagen Touran?

What are the causes of the Ford Focus hatchback's radiator boiling over?

What is the most suitable mileage for the first maintenance of the X-Trail?

What are the differences between the low-end and high-end versions of the Highlander?