What is the fuel consumption of the Lamando?

1 Answers
RileyDella
07/29/25 1:46pm
The fuel consumption of the Lamando is 6.77L/100km. Methods to determine fuel consumption: You can determine fuel consumption through the car's dashboard, where F=full (represents full) and E=empty (represents empty). When the fuel tank's red light comes on, record the mileage, then note how much fuel is added. When the fuel runs out next time, record the mileage again. Subtract the initial mileage from the current mileage, then divide by the amount of fuel used to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but higher fuel consumption does not necessarily mean larger displacement. In relative terms, the size of a car's engine displacement does not directly correlate with fuel consumption. Besides engine size, factors such as the car's shape, weight, and engine technology also significantly impact fuel consumption. Among vehicles with the same displacement, those with more advanced engine technology tend to be more fuel-efficient.
Was this review help?
4
5
Share
More Forum Discussions

Do You Need to Press the Brake When Shifting from D to L Gear in an Automatic Transmission?

When shifting from D gear to L gear while driving an automatic transmission car, you do not need to press the brake. There is a specific button on the gear lever or shift handle designed for this type of gear shift—simply press and hold the button to complete the operation. In an automatic transmission, P stands for Park, R for Reverse, N for Neutral, S for Sport mode, D for Drive, L for Low gear, and M for Manual mode. When descending a hill or a long slope, you should shift to L gear, which restricts the car to the lowest gear automatically. This allows the engine to assist in braking, preventing the need for prolonged brake pedal use that could overheat the brake pads and pose a hazard.
11
3
Share

Can You Drive Normally with Abnormal Tire Pressure?

It is not advisable to drive normally with abnormal tire pressure; immediate inspection and repair should be conducted. When tire pressure is abnormal, the tire pressure monitoring system (TPMS) warning light on the vehicle will illuminate, alerting the driver to a potential issue with the tire pressure system. At this point, the vehicle's performance may degrade, and driving safety could be compromised. Excessively high tire pressure accelerates wear on the central tread, shortening the tire's lifespan, and negatively impacts ride comfort as well as the longevity of other components. Additionally, overinflated tires reduce puncture resistance, making them more susceptible to sharp objects, which can lead to blowouts.
3
4
Share

What is the difference between green antifreeze and red antifreeze?

Red antifreeze and green antifreeze differ in model and composition. Below are the relevant details: 1. Different models: Red antifreeze is model G11; green antifreeze is model G12. 2. Different compositions: Red antifreeze mainly contains propylene glycol; green antifreeze mainly contains ethylene glycol. Antifreeze generally comes in colors such as blue, red, yellow, and green. Different colored antifreezes should not be mixed, as this can produce highly corrosive substances that can cause significant damage to the engine. Antifreeze is a coolant with anti-freezing properties, composed of anti-freeze additives, additives that prevent metal corrosion, and water. It needs to have properties such as anti-freezing, anti-corrosion, heat conduction, and resistance to deterioration.
18
5
Share

What are the causes of unstable idle speed in motorcycles?

Motorcycle idle speed refers to a working condition where the engine runs without load when the motorcycle is stationary. The following are detailed explanations of the causes of unstable idle speed in motorcycles: 1. Incorrect ignition timing: Inaccurate ignition timing leads to poor idle performance. 2. Air leaks: Presence of air leaks in the engine. 3. Spark plug issues: Incorrect electrode gap in the spark plug. 4. Carburetor problems: Blocked idle jet in the carburetor. 5. Wrong gasoline grade: Use of incorrect gasoline octane rating. 6. Air filter blockage: Clogged air filter or muffler. 7. Poor gasoline quality: Substandard gasoline quality.
15
1
Share

What is the Low Beam Light Symbol for Cars?

The low beam light symbol for cars features light rays projecting to the left and angled downward. On the dashboard, the low beam indicator is displayed in green. Below is extended information about low beam lights: 1. Function of Low Beam Lights: Low beams are used for short-range illumination with a wide coverage area. They help drivers clearly see the road conditions around the vehicle during nighttime driving. 2. Usage Scenarios for Low Beam Lights: (1) Driving in dark areas without streetlights, or during dusk when light is dim or dawn when daylight first appears, requires the use of low beam lights. (2) In conditions of heavy fog, snow, or rain where visibility is obstructed, low beam lights must be turned on even during daytime.
19
4
Share

What are the differences between the Mercedes-Benz V260 and the Vito?

Mercedes-Benz V260 and Vito differences are: 1. Different tire models: The Mercedes-Benz V260 tire model is 245/50r18; the Vito tire model is 235/55r17. 2. Different body lengths: The Mercedes-Benz V260 body length is 5140mm; the Vito body length is 5370mm. 3. Different wheelbases: The Mercedes-Benz V260 wheelbase is 3200mm; the Vito wheelbase is 3430mm. Both the Mercedes-Benz V260 and Vito are equipped with a 2.0T turbocharged engine, with a maximum horsepower of 211ps, a maximum power of 155kw, and a maximum torque of 350nm, matched with a 9-speed automatic transmission.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.