···
Log in / Register

What is the fuel consumption of the LaCrosse 2.0T?

3 Answers
LaJonathan
08/26/25 4:32am
According to actual measurements, the average fuel consumption of the LaCrosse 2.0T engine model is 10L/100KM, with a consumption range of 8.33L-11.65L. Such fuel consumption performance can be considered quite excellent, given the weight of the LaCrosse. Additionally, with the support of a variable-cylinder turbocharged engine, the engine can automatically switch between two and four cylinders, thus achieving good fuel economy. The LaCrosse's engine output power holds an advantage among models in the same class, making it a worthy consideration. Here are some related details: 1. MIIT fuel consumption: The MIIT comprehensive fuel consumption is 6.9L/100km. Fuel consumption data is generally provided by the MIIT, but the MIIT figures are often significantly lower than actual conditions. The MIIT measures fuel consumption not through real-road testing, so this parameter can only be used as a reference. 2. Factors affecting fuel consumption: If a driver frequently revs the engine high, it will inevitably lead to increased fuel consumption. It is difficult to determine an exact fuel consumption value, as long as it falls within the normal range, it is acceptable. Many factors affect a vehicle's fuel consumption performance, such as vehicle weight, tires, wind resistance, and load.
Was this review help?
12
4
Share
LaXavier
09/08/25 5:56am
I've been driving the Buick LaCrosse 2.0T for two years now, and I find its fuel consumption quite reasonable, averaging around 9.5 to 10.5 liters per 100 kilometers overall. The specific performance depends on how you drive: in city traffic jams, it can jump to 11-12 liters, sometimes even higher, as I often drive during peak hours—aggressive acceleration or using the AC adds about a liter. On highways, it's much more fuel-efficient, steadily maintained at 8-9 liters, with sufficient power. Key factors include tire pressure and maintenance intervals—I check regularly, and after oil changes and air filter replacements, the fuel consumption drops by about half a liter. Compared to similar-class cars like the Passat or Magotan, the LaCrosse is slightly higher in fuel consumption but wins in comfort. In short, I recommend smooth driving and minimizing idling to save both money and hassle.
Was this review help?
18
1
Share
Expand All
CoraDella
10/22/25 6:01am
As a daily commuter, I drive my LaCrosse 2.0T for 30-40 kilometers round trip every day, with urban roads accounting for the majority. The fuel consumption typically starts at 11 liters per 100 kilometers. Last week's refueling records showed a monthly average of 11.5 liters, mainly affected by frequent traffic lights and congestion. To save money, I've learned to avoid sudden braking and use cruise control on highways, which immediately reduces fuel consumption to around 9 liters. Using the heater in winter adds only about 0.5 liters. Low tire pressure or aged engine oil can increase the burden—I've learned this the hard way. Now, I maintain the car every three months, and it really shows results. Considering driving habits, this car is suitable for office workers, but don't expect too low fuel consumption if you make many short trips.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What Causes a Car to Fail to Start After Auto Start-Stop Shuts Off the Engine?

Auto start-stop shutting off the engine and then failing to restart is because the driving operation does not meet certain conditions required for the auto start-stop system to activate. Below are the specific reasons why a car may fail to start after auto start-stop shuts off the engine: Accidentally pressing the auto start-stop button, causing the system to deactivate: Generally, vehicles equipped with auto start-stop functionality have the system enabled by default. If it suddenly stops working, it might be due to accidentally pressing the auto start-stop button, which deactivates the system. Driving operations do not meet the necessary conditions for activation: Different models from various brands have different designs for their auto start-stop systems. For example, the seatbelt must be fastened, the front left door must be closed, and the engine must be in the starting phase, among other conditions. The car does not meet the auto start-stop activation conditions: The engine has not reached normal operating temperature, the automatic air conditioning has not reached the preset temperature, the battery charge is insufficient, the steering wheel is turned after stopping, the vehicle is in emergency braking mode, or reversing, etc. Auto start-stop system malfunction: A malfunction in the auto start-stop system could be due to wiring issues or other reasons causing the system to fail.
5
5
Share

What is the Scrap Life of a Pickup Truck?

Currently, pickup trucks are still subject to the mandatory scrappage regulation of 15 years or 600,000 kilometers. However, some regions are gradually lifting the 15-year scrappage rule, meaning household pickup trucks no longer have a fixed scrappage period. Instead, the 600,000-kilometer scrappage regulation is enforced. According to the annual inspection rules for pickup trucks: new pickups are exempt from inspection for the first 6 years, but within this period, owners must visit the vehicle management office every two years to "get a stamp." From years 7 to 15, inspections are required annually, and after 15 years, inspections are required every six months. Pickups that fail the annual inspection or exceed 600,000 kilometers must be scrapped. Below are some relevant details: 1. The reality of pickup trucks: In practice, based on the usage patterns of domestic pickup owners, mechanical wear and tear after 5-8 years of use leads to a sharp increase in maintenance costs, higher fuel consumption, and significant depreciation. Additionally, the cost of semi-annual inspections after 15 years is often too burdensome for many pickup owners, prompting them to replace their vehicles within 5-10 years. 2. Factors affecting the used pickup market: A major factor hindering the growth of the used pickup market is the "15-year mandatory scrappage" policy. A nationwide trend in China's automotive industry is the complete removal of restrictions on the cross-regional transfer of used vehicles. Cities like Taiyuan, Datong, Dalian, and Yichang have already issued policies to lift these restrictions, with plans to further boost the used vehicle market. For used vehicle dealerships selling pickups, the value-added tax policy for second-hand goods applies, with a reduced VAT rate of 2% (originally 3%).
4
4
Share

Location of the Car Fuel Tank?

Generally, the fuel tank of a small car is located towards the middle and rear of the vehicle. The fuel filler cap can be identified through the fuel gauge light on the car's dashboard. There is usually an arrow indicator on the fuel gauge, and the direction the arrow points indicates the side where the fuel tank is located. To check the remaining fuel level, the driver can observe the gasoline gauge on the right side of the dashboard, which is marked with 'E' and 'F'. When the needle is close to 'E', it means the fuel is running low, and when it's near 'F', it indicates a sufficient fuel level. Methods to open the fuel tank: Mechanical Key: This method is commonly found in some rugged off-road vehicles. Most modern family cars do not use a mechanical key to open the fuel tank due to its relatively complex operation. In-Car Switch: The location of the in-car fuel tank switch varies among different car models. It might be on the floor to the left of the driver's seat, on the left front door panel, or on the center console, usually marked with a fuel pump icon. However, drivers should be cautious as it's easy to forget to turn off the engine before refueling when using this method. Always remember to turn off the engine before refueling. Press-to-Open: The press-to-open fuel tank door is currently the most convenient method. The driver only needs to park the car, and the fuel attendant can press to open the fuel tank for refueling. However, when not parked for refueling, the driver should always lock the central control to prevent the fuel tank cap from being opened.
6
5
Share

What are the advantages and disadvantages of front-engine rear-wheel drive?

Front-engine rear-wheel drive has the advantage of good handling stability; the disadvantage is that it affects fuel economy. The following are the specific advantages and disadvantages of front-engine rear-wheel drive: Advantages of front-engine rear-wheel drive: When starting, accelerating, or climbing on well-paved roads, the load on the drive wheels increases (i.e., the adhesion pressure of the drive wheels increases), and its traction performance is superior to that of front-engine front-wheel drive. The axle load distribution is relatively even, resulting in good handling stability and ride comfort, and it helps extend the service life of the tires. The engine, clutch, and transmission and other assemblies are close to the cab, simplifying the arrangement of the control mechanism. The steering wheels are non-driven wheels, making the steering mechanism simple and easy to maintain. Disadvantages of front-engine rear-wheel drive: The use of a driveshaft device not only increases the weight of the car but also reduces the transmission efficiency of the powertrain, affecting fuel economy. The layout of the longitudinally mounted engine, transmission, and driveshaft and other assemblies reduces the space in the cab, affecting ride comfort; at the same time, the reduction of floor height is also limited. When starting and accelerating on snowy or slippery roads, the rear wheels push the body, which can easily cause fishtailing. The layout of the longitudinally mounted engine, transmission, and driveshaft and other assemblies reduces the space in the cab, affecting ride comfort; at the same time, the reduction of floor height is also limited. When starting and accelerating on snowy or slippery roads, the rear wheels push the body, which can easily cause fishtailing.
7
0
Share

What is the best oil model for Audi A6?

Audi A6 is best suited to use fully synthetic oil with SL grade or higher, which has good anti-wear properties, high-temperature resistance, and strong oil film strength. Below is relevant information about oil grade classification and functions: Oil Grade Classification: Oil grades are classified based on quality and viscosity. Quality classification: The "S" series represents oil for gasoline engines, while the "C" series represents oil for diesel engines. From "SA" up to "SN," each subsequent letter indicates better performance than the previous one, with letters further in the alphabet representing higher quality grades. Viscosity classification: The "W" stands for Winter, and the lower the number before the W, the better the oil's low-temperature fluidity, meaning it can be used in lower environmental temperatures and provides better engine protection during cold starts. The number after the W represents the oil's viscosity at high temperatures—higher numbers indicate higher viscosity, which offers better engine protection. Functions of Engine Oil: Friction Reduction: A sufficiently thick oil film separates the surfaces of sliding parts, thereby reducing wear. Sealing: Engine oil forms a seal between the piston rings and pistons, reducing gas leakage and preventing contaminants from entering. Rust Prevention: Lubricating oil adheres to part surfaces, preventing contact with water, air, acidic substances, and harmful gases. Cushioning: When pressure in the engine cylinder rises sharply, suddenly increasing the load on pistons, piston rings, connecting rods, and crankshaft bearings, the lubricated transmission through bearings cushions the impact load. Cleaning: High-quality oil can carry away carbon deposits, sludge, and worn metal particles from engine parts back to the oil pan, flushing away contaminants generated on part surfaces through oil circulation.
17
3
Share

What is the standard tire pressure for the Fit?

The normal tire pressure for the Honda Fit ranges between 2.4 and 2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The Honda Fit features an automatic monitoring function, which does not require manual activation. When a tire abnormality is detected, the dashboard will automatically display a message. The display does not show specific values but indicates which tire has an issue. The tire pressure must be restored to the normal range before the tire pressure data can be reset. To reset, press and hold the tire pressure SET button on the center console until the tire pressure data refreshes, and the tire pressure warning light will disappear. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heat due to excessive rolling; degrades the function of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, rapidly raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Typically, an alarm is triggered when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, failure to reset the tire pressure monitoring system results in the system retaining the previous data, causing the indicator light to illuminate. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. Damaged sensors must be replaced with new ones.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.