What is the fuel consumption of the Kia K3?

1 Answers
Josephine
07/30/25 4:05am
The comprehensive fuel consumption of the Kia K3 is 5.3-5.4L/100km. There are currently 4 models of the Kia K3 on sale: the Strive Connect Edition and the Smart Drive Sport Edition, with a comprehensive fuel consumption of 5.3L/100km. The Fashion Edition, Youth Edition, and Renewal Edition have a comprehensive fuel consumption of 5.4L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.3-7.5L/100km. Specific factors affecting a car's fuel consumption are as follows: Vehicle weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while an SUV weighing about 1.5 tons consumes around 8.5 liters. Different weights result in varying fuel consumption. Drag coefficient: Higher drag increases fuel consumption during driving. Cars with better aerodynamics have lower drag, leading to reduced fuel consumption. Economical RPM: During driving, the engine has an optimal torque output point. Maintaining the car's speed within this torque output range significantly reduces fuel consumption. Generally, for small-displacement cars, this is around 70 km/h, while for larger-displacement cars, it's about 100 km/h. Keeping within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption.
Was this review help?
19
3
Share
More Forum Discussions

What are the techniques for making a U-turn in Subject Three?

Subject Three U-turn techniques are as follows: 1. Upon hearing the voice prompt 'Please make a U-turn ahead', the candidate should turn on the left turn signal for more than three seconds, carefully observe the surrounding conditions, safely yield to oncoming vehicles, and must use a gear below second gear when making the U-turn, reducing the vehicle speed to below 20 km/h. If necessary, first gear with half-clutch can be used for the U-turn. The operation sequence is: signal, look, brake, downshift, and then U-turn. 2. Pay attention to yielding to vehicles coming from both directions, and do not affect the normal driving of other vehicles. You can stop and wait before making the U-turn, grasp the timing to ensure completing the U-turn in one go, and avoid stopping midway due to improper operation. When making the U-turn, the steering technique should be standardized, smooth, and moderate, avoiding turning or returning the steering wheel too early, too late, or with too large or too small a turning angle. 3. Upon hearing the voice prompt 'U-turn completed', it indicates the completion of this test item. 4. If there is a crosswalk during the U-turn, the vehicle must pass the crosswalk before making the U-turn. Do not make a U-turn on the crosswalk, and do not stop and wait on the crosswalk.
12
1
Share

How much horsepower does the M8 Competition have?

BMW M8 Competition has 625 horsepower. Here are the details about the BMW M8 Competition: 1. Enhanced performance. The BMW M8 Competition is available in both two-door coupe and four-door hardtop versions. The four-door version measures 5104 mm in length, 1943 mm in width, and 1420 mm in height, with a wheelbase of 3027 mm. 2. The BMW M8 Competition is powered by a 4.4-liter twin-turbocharged V8 engine, which delivers a maximum power of 460 kW at 6000 rpm and a maximum torque of 750 Nm between 1800 and 5600 rpm. This engine features direct fuel injection and utilizes an aluminum alloy cylinder head and block, reducing overall engine weight to enhance vehicle handling and fuel efficiency. It is paired with an 8-speed automatic transmission (8AT), which ensures smooth gear shifts and improved fuel economy while offering high reliability and durability. 3. The BMW M8 Competition employs a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The multi-link suspension enhances both handling and ride comfort. Derived from the double-wishbone design, the multi-link suspension replaces the two wishbones with individual links. The double-wishbone suspension effectively reduces body roll.
14
0
Share

How to operate the traffic law learning score deduction exemption?

Driver users click on the business function on the homepage, select the 'Score Deduction through Learning' button, and enter the application page for score deduction through learning. Choose online learning, click the application button, read the business instructions, and then click submit. Click the 'Score Deduction through Learning' button to enter the learning interface. After reading the learning instructions, real-person authentication is required, and then proceed with learning as prompted.
4
3
Share

How to Adjust the Valve of an LNG Vehicle for Both Fuel Efficiency and Power?

When the pressure in the buffer tank drops to zero, start by opening the valve a quarter turn. You will hear a hissing sound of gas escaping. Once the sound stops, fully open the valve and then turn it back one full turn. When the cylinder pressure is below 0.8Mpa, open the valve while simultaneously activating the pressurization valve. When replacing cylinder components, open the pressure relief valve or if the cylinder pressure is too high, it needs to be emptied.
2
0
Share

What are the dimensions of the Dongfeng Fengxing M6?

The dimensions of the Dongfeng Fengxing M6 are 5080mm in length, 1770mm in width, and 1915mm in height, as per official data. The length of the Dongfeng Fengxing M6 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane, touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane, touching the outermost rigid fixed protruding points on both sides. The height refers to the distance between the highest point of the vehicle and its supporting plane. The turbocharged engine of the Dongfeng Fengxing M6 delivers a maximum power of 100kW and a maximum torque of 200Nm. This engine reaches its maximum power at 5600 RPM and its maximum torque between 2000 and 4400 RPM. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. The engine is paired with a 6-speed manual transmission. National regulations stipulate certain requirements for vehicle dimensions. According to the national standard 'GB1589-89', the total width of a vehicle does not include side mirrors. The limitation on vehicle width is intended to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring adequate space during overtaking, preventing accidents or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
18
2
Share

How to Check Driving Experience?

Log in to the local traffic police website, then click on the driver information inquiry. After opening the page, enter the driver's license number as prompted, followed by the file number. Bring your driver's license and ID card to the violation processing hall or the license office hall of the traffic police team. Hand over your documents to the staff, and they will retrieve your file information. Open the main page of the motor vehicle driver's license, locate the "Initial License Date," and you will know the driving experience of the license.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.