What is the fuel consumption of the Kia K3?

1 Answers
Tony
07/30/25 3:40am
The Kia K3 has a fuel consumption of 8.40 liters per 100 kilometers. Factors affecting fuel consumption: 1. Personal driving habits: The driver's habits significantly impact the car's fuel consumption. Aggressive acceleration and inconsistent throttle control naturally increase fuel usage. It's better to apply gentle, steady pressure on the accelerator. When approaching a red light, gradually reduce speed instead of braking suddenly. Start slowly and avoid flooring the accelerator, as this not only increases fuel consumption but also protects the car. 2. Using the air conditioning: Many people leave the AC on or turn it on immediately after starting the car. This forces the engine to divert power to both heating the oil and running the AC, leading to higher fuel consumption. It's more efficient to drive for a while to warm up the engine before turning on the AC, which significantly reduces fuel usage. 3. Prolonged idling: Contrary to popular belief, idling does consume fuel. Short idling periods have minimal impact, but extended idling can be as fuel-intensive as driving. If idling for a long time, it's better to turn off the engine. 4. Tire pressure: Fuel consumption is also heavily influenced by tire pressure. Incorrect tire pressure or switching to larger tires can drastically increase fuel usage. The recommended tire pressure, usually found on the A-pillar or B-pillar of the car, is the optimal setting for fuel efficiency.
Was this review help?
11
5
Share
More Forum Discussions

Does exceeding the oil level limit have any impact?

Exceeding the oil level limit does have an impact. If too much oil is added, the resulting hazards include reduced power, increased carbon deposits, worsened exhaust emissions, and engine oil leaks. When the engine is running, the crankshaft and connecting rods inside rotate rapidly. Since the crankshaft stirs within the oil, higher oil pressure makes it more difficult for the crankshaft to rotate. Excessive oil can hinder the crankshaft's movement, leading to decreased engine power output. There is a yellow pull ring in the engine compartment—this is the oil dipstick. When pulled out, you can see two marked lines or sometimes two holes at the lower end of the dipstick, indicating the upper and lower limits of the oil level. The vehicle's oil level must be maintained between these two marks to be considered normal.
13
1
Share

How often should the transmission fluid be changed for the Haval F7?

The manual transmission fluid for the Haval F7 should be changed every 50,000 kilometers, while the automatic transmission fluid should be changed every 100,000 kilometers. Transmission fluid is an oil product that keeps the gear system clean, ensuring the normal operation of the transmission and extending the lifespan of the transmission components. The Haval F7 is a compact 5-door, 5-seat SUV with dimensions of 4620mm in length, 1846mm in width, and 1690mm in height, and a wheelbase of 2725mm. In terms of exterior design, the side profile of this car gives a very solid impression, with multiple character lines enhancing the sense of layering. The chrome-trimmed window lines rise towards the rear of the body and tighten at the tail, adding visual tension.
9
4
Share

How to adjust the time on Volkswagen Bora?

Volkswagen Bora time adjustment method: Use the buttons below the instrument cluster display to adjust. First, press the left menu button until the digits on the trip computer flash, then use the right button to make adjustments. The Bora is a compact car under FAW-Volkswagen, with dimensions of 4663mm in length, 1815mm in width, and 1462mm in height, and a wheelbase of 2688mm. In terms of exterior design, the car features winged headlights with strong three-dimensional effects. Compared to the current model, the rear design has changes in both contour and light clusters, with more streamlined body lines and the adoption of aluminum alloy wheel designs.
16
1
Share

What brand are the tires on the Trumpchi GA6?

The tires on the Trumpchi GA6 are Michelin. Tires are a crucial component of a vehicle, as they are the parts that come into direct contact with the ground. Therefore, selecting the right tires is very important. Good tires can help absorb shocks and improve driving comfort. The Trumpchi GA6 is a mid-size car under the Trumpchi brand, with dimensions of 4891mm in length, 1850mm in width, and 1505mm in height, and a wheelbase of 2815mm. In terms of power, this car is equipped with a 1.5-liter turbocharged four-cylinder engine, delivering a maximum power of 124 kW and a maximum torque of 265 Nm, with the maximum torque available between 1700 and 4000 rpm.
19
1
Share

How to Test the Condition of a Cruze Ignition Coil?

Methods to test the condition of a Cruze ignition coil: 1. Use the substitution method for inspection—replace one ignition coil with a normal one, and if the fault disappears, it indicates a problem with the original ignition coil; 2. Measure the resistance of the primary and secondary windings with a multimeter. A high resistance reading suggests an open-circuit fault in the winding. The Cruze is a compact car produced by SAIC-GM Chevrolet, with dimensions of 4666 mm in length, 1807 mm in width, and 1460 mm in height, and a wheelbase of 2700 mm. For the interior, the Cruze features decorative panels and door trim panels in various colors, using matte materials to enhance the overall texture of the cabin.
19
3
Share

What are the symptoms of overfilling engine oil in a car?

Symptoms of overfilling engine oil in a car: 1. Increased crankshaft rotation resistance; 2. Reduced engine power output; 3. Causes oil burning and blue smoke emission; 4. Accelerates wear of cylinders and pistons. Engine oil, also known as engine lubricant, is regarded as the lifeblood of a car. It serves multiple functions including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Engine oil is a substance enhanced with additives in base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade viscosity index improvers. Used for lubricating internal combustion engines, its main functions are to reduce friction and wear of moving parts, and to remove sludge and varnish from the engine.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.