What is the fuel consumption of the Junma Seek5?

1 Answers
LaJack
07/29/25 5:42pm
The fuel consumption of the Junma Seek5 ranges from 7.7 to 7.9 liters per 100 kilometers. Taking the 2018 Junma Seek5 as an example, its body structure is a five-door, seven-seat SUV. The dimensions are: length 4771mm, width 1859mm, height 1735mm, with a wheelbase of 2800mm. The fuel tank capacity is 58 liters, and the trunk capacity is 1730 liters. The curb weight is 1560kg. The 2018 Junma Seek5 features a front suspension system of MacPherson independent suspension and a rear suspension system of torsion beam non-independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 230Nm. It is paired with a 6-speed manual transmission.
Was this review help?
14
2
Share
More Forum Discussions

How much engine oil should be added to the Chery Arrizo 5?

Adding 3.8 liters of engine oil provides the best protection for the Chery Arrizo 5's engine. Here's more information about adding engine oil to the Chery Arrizo: 1. The factory-recommended oil for the Arrizo 5 is SM-grade 10W-40. As an economical model, semi-synthetic oil is a better choice. 2. Whether to upgrade to full synthetic oil depends on personal financial capability. The Arrizo 5's engine doesn't have specific brand requirements for oil, as long as it meets the specifications. If the local temperature is lower, it's advisable to switch to 5W-40 grade oil.
20
5
Share

What suspension does the Mercedes-Benz GLB use?

The Mercedes-Benz GLB uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. Most vehicles use MacPherson strut suspension for the front because it is cost-effective, simple in structure, and takes up little space. The MacPherson strut suspension has only one L-shaped control arm, which hardly occupies any space in the engine compartment. The Mercedes-Benz GLB is a compact SUV with a 5-door, 5-seat configuration. Its body dimensions are 4638 mm in length, 1834 mm in width, and 1687 mm in height, with a wheelbase of 2829 mm. The GLB is powered by a 1.3T turbocharged engine paired with a 7-speed dual-clutch transmission.
3
0
Share

How to Turn on Bluetooth in Passat?

After turning on the ignition, the system will automatically recognize and connect to known Bluetooth-enabled phones. At this time, the Bluetooth function on the phone must be turned on. Below is relevant information: 1. Bluetooth: Bluetooth technology allows Bluetooth-enabled phones to connect to the car's hands-free calling device. Before using the car's Bluetooth function, the Bluetooth phone must be paired with the vehicle's hands-free calling device to enable the connection via Bluetooth technology. 2. Function: The car's Bluetooth function automatically identifies mobile phones, allowing connection without cables or phone holders. The driver can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can conduct calls through the car's audio system.
9
1
Share

Are regular cars generally front-wheel drive or rear-wheel drive?

Regular cars are generally front-wheel drive. The design of front-wheel drive vehicles is less expensive than rear-wheel drive vehicles, both in terms of design and assembly. Front-wheel drive cars do not require a rear drive shaft or rear gearbox, resulting in fewer assembly components. Front-wheel drive vehicles are lighter than rear-wheel drive vehicles, which allows for faster acceleration, shorter braking distances due to easier acceleration, and generally better fuel efficiency compared to rear-wheel drive cars. The downside of front-wheel drive is its handling. Since the car's components are relatively concentrated in the front of the body, the rear becomes very light, making the rear wheels prone to losing traction. Additionally, the front axle bears excessive load during acceleration and braking, causing noticeable lift and affecting comfort.
14
3
Share

What is the difference between V8 and V12?

The differences between V8 and V12: 1. Different engines: The V8 engine has 8 cylinders; the V12 engine has 12 cylinders. 2. Different configuration ranges: The V8 has relatively lower power and is generally configured in ordinary cars; the V12 has much stronger power, and its engines are used in larger vehicles, mostly luxury top-tier cars like the A8, BMW 760, and Mercedes S600, which are all quite heavy. 3. Different cylinder arrangements: The V8 has a V-shaped arrangement with 4 cylinders on each side; the V12 also has a V-shaped arrangement but with 6 cylinders on each side. The more cylinders an engine has, the harder it is to control, the more complex the control system becomes, and the stricter the manufacturing process of the cylinder block must be.
1
0
Share

What engine does the MG GS use?

MG GS is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 220 hp, maximum power of 162 kW, and maximum torque of 350 N·m. The transmission system paired with this engine is a 6-speed dual-clutch transmission. MG GS is a five-door, five-seater compact SUV with body dimensions of 4510 mm in length, 1855 mm in width, and 1699 mm in height, and a wheelbase of 2650 mm. The MG GS features front-engine, four-wheel drive (4WD) with an on-demand four-wheel drive system. The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.