···
Log in / Register

What is the fuel consumption of the Jingyi X3?

4 Answers
VanLukas
07/29/25 12:56pm

The fuel consumption of the Jingyi X3 is 6.8 liters per 100 kilometers. Reasons for the fuel consumption of the Jingyi X3: Unnecessary prolonged idling, carrying unnecessary cargo, not turning off the engine during long stops, rapid acceleration, and sudden braking. Methods to reduce fuel consumption for the Jingyi X3: Smooth starting and acceleration, proper gear shifting; keep the engine speed between 1500-2500 RPM, and avoid rapid throttle starts; maintain an economical speed, generally 60-80 km/h on regular roads and 100-120 km/h on highways; avoid sudden braking and prolonged idling. Frequent braking and idling consume a lot of fuel, so it's important to maintain a proper distance from the vehicle ahead; turn off the engine in heavy traffic; keep the vehicle's aerodynamic resistance low, maintain correct tire pressure, and close the windows when driving above 80 km/h. Additionally, regularly check tire pressure, as both high and low pressure can lead to increased fuel consumption.

Was this review help?
15
5
Share
EmmaLee
08/14/25 1:51am

I've been driving this car for almost two years now. For city commuting, the fuel consumption is basically 8.5 liters per 100 kilometers, and it drops to just over 7 liters on the highway. If I encounter traffic jams or use the air conditioning, it might spike to 9 liters, but driving steadily usually saves a lot on fuel costs. I think the engine design of this car is quite reasonable; the 1.6L displacement isn’t a fuel guzzler, but road conditions have a big impact—driving on mountain roads or carrying heavy loads can add a bit of burden. I recommend regularly checking tire pressure and replacing the air filter; these simple tasks can easily help you save half a liter of fuel. Overall, it’s more fuel-efficient than SUVs in the same class, like the Haval H6, which has higher fuel consumption. But with gentle driving in daily use, saving a few bucks per 100 kilometers is definitely worth it.

Was this review help?
1
3
Share
Expand All
PaisleeAnn
10/09/25 6:48am

For tech enthusiasts, the Jingyi X3's fuel consumption is quite reasonable, with an official combined figure of 7.8 liters, though actual usage varies due to multiple factors. The engine is a 1.6L naturally aspirated model paired with a CVT transmission, and its aerodynamic optimization is decent but not top-tier. In city traffic or with AC on, it can rise to 9 liters. The key point is that regular maintenance can improve things significantly—for example, low tire pressure increases fuel consumption by 5%, and a dirty air filter also hampers efficiency. Compared to peers like the Changan CS35 PLUS, this car's fuel consumption is slightly lower, and adopting smoother driving habits (avoiding sudden braking and acceleration) helps save fuel. Overall, despite its SUV weight, the powertrain tuning is effective, and long-term testing shows normal fuel consumption fluctuations—stability is fine as long as the electronic control system isn't tampered with via modifications.

Was this review help?
18
5
Share
Expand All
XavierRose
11/22/25 8:02am

From an environmental perspective, the fuel consumption of the Jingyi X3 is quite practical, with an average combined figure of about 7-8 liters, and not exceeding 9 liters even in city driving. This is beneficial for emission reduction. Driving slowly and smoothly can save fuel and reduce carbon emissions. I usually turn off the air conditioning and open windows for ventilation to contribute a little. It certainly can't compare with pure electric vehicles, but it performs better in emission reduction compared to older fuel-powered SUVs. It's advisable to consider green driving habits when choosing a car. Regular maintenance can keep the engine running more efficiently, and keeping fuel consumption under 7 liters is an ideal goal. Overall, its lighter environmental burden makes it quite worthy of promotion.

Was this review help?
20
5
Share
Expand All
More Forum Discussions

What to Do When the Tire Pressure Monitoring Warning Light Comes On?

The solution when the tire pressure monitoring warning light comes on is: Stay calm, do not panic, immediately reduce your speed and avoid sharp steering or sudden braking, then pull over to check the tires. If you have a portable inflator or tire pressure gauge, you can move to the roadside to measure and adjust the pressure in each tire; if not, drive slowly to the nearest auto repair shop or 4S store for servicing. The functions of tire pressure monitoring are: 1. To alert the driver promptly when there are signs of tire danger, prompting them to take appropriate action to prevent serious accidents; 2. To ensure tires operate within the specified pressure and temperature range, reducing damage and extending their service life.
18
4
Share

How to Turn on the Air Conditioning in a Chevrolet Cruze?

To operate the air conditioning in a Chevrolet Cruze: Press the AUTO button to automatically adjust air distribution and fan speed. Press the AC button to activate cooling and defogging functions, with the status indicated by the LED light on the right knob. Turn the right knob to set the temperature. In terms of body dimensions, the Chevrolet Cruze measures 4666mm in length, 1807mm in width, and 1460mm in height, with a wheelbase of 2700mm. Exterior-wise, the Cruze features the family-style large grille, with angular headlights on the full front end giving it a bold appearance. The strongly lined engine hood and integrated bumper, along with slightly exaggerated design elements, make the Cruze look dynamic and youthful.
13
1
Share

How to reset the maintenance reminder for BAIC Senova D50?

The method to reset the maintenance reminder for BAIC Senova D50 is: Turn off the ignition, press and hold the RESET button, turn the key to ON position, release the RESET button, press and hold the INFO button for a few seconds until the maintenance reset option appears, press INFO to confirm the selection, then press RESET to complete. The BAIC Senova D50 is a compact sedan with dimensions of 4630mm in length, 1820mm in width, and 1820mm in height, a wheelbase of 2670mm, and a fuel tank capacity of 50 liters. In terms of power, this vehicle is equipped with a 1.5L naturally aspirated engine delivering a maximum horsepower of 116PS and a peak power output of 85kW.
12
3
Share

What is the ground clearance of the A4?

The ground clearance of the A4 is 130mm. A larger ground clearance enhances the vehicle's ability to pass over obstacles or uneven terrain, but raises the center of gravity, reducing stability. Conversely, a smaller ground clearance weakens the vehicle's ability to traverse obstacles or rough surfaces, but lowers the center of gravity, improving stability. The Audi A4 is a mid-size sedan with dimensions of 4762mm in length, 1847mm in width, and 1436mm in height, and a wheelbase of 2825mm. It features a five-link independent suspension at both the front and rear. The A4 is powered by a 2.0T turbocharged engine, delivering a maximum power of 150kW and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
12
3
Share

How much horsepower does the 6th generation Golf GTI have?

6th generation Golf GTI has 210 horsepower. Engine horsepower is an important parameter of an engine, measuring how much work the engine can perform per unit of time. In terms of power, the 6th generation Golf uses two engines: one is a 1.4-liter turbocharged engine, and the other is a 1.6-liter naturally aspirated engine. The dimensions of the 6th generation Golf are 4199mm in length, 1779mm in width, and 1479mm in height, with a wheelbase of 2578mm. In terms of safety features, this car is equipped with front and side airbags for the driver and front passenger, seatbelt reminder, rear child seat anchors, ABS anti-lock braking system, brake force distribution, brake assist, traction control, and electronic stability program.
4
3
Share

What does 2.0t mean?

2.0t refers to the volume between the top dead center and bottom dead center of the piston movement in the cylinder multiplied by the number of cylinders, which is the engine displacement of a car. A larger displacement indicates greater power output. When the displacement is added to the combustion chamber volume and then divided by the combustion chamber volume, the result is the compression ratio. A higher compression ratio leads to higher temperatures and more complete combustion. The 't' indicates that this engine is equipped with a turbocharger. With the same displacement, a turbocharged engine delivers greater power and increased torque. Turbocharged engines ensure boost effects under different operating conditions, significantly increasing the vehicle's power output. The specific benefits manifest in two aspects. First, quicker acceleration and higher top speed. During driving, the exhaust gases emitted by the engine are recycled and reprocessed by the turbocharger, supplementing energy and enabling faster acceleration compared to similar non-turbocharged vehicles. Second, environmental friendliness and fuel efficiency. The exhaust gases undergo thorough recirculation in the turbocharger, akin to a secondary combustion process, which not only more effectively reduces harmful emissions but also improves fuel economy compared to similar models. The turbocharger essentially functions like an air compressor, increasing intake air volume by compressing air. It utilizes the inertial force of the engine's exhaust gases to drive the turbine in the turbine housing, which in turn drives the coaxial impeller. The impeller then compresses the incoming air from the air filter duct, forcing it into the cylinders under pressure. As the engine speed increases, the exhaust gas velocity and turbine speed rise synchronously, allowing the impeller to compress more air into the cylinders. This enables more fuel to enter the cylinders for combustion while simultaneously boosting the engine's output power.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.