What is the fuel consumption of the Jiayu 110?

1 Answers
Virgil
07/30/25 8:30am
The fuel consumption of the Wuyang-Honda Jiayu 110 is around 3L. Here are the relevant details: Model: The Wuyang-Honda Jiayu is a quite classic model. Since its launch, it has held a very important position in the Chinese motorcycle market. Whether in terms of engine technology or appearance, there have been hardly any major changes, yet its sales have consistently been very good. Engine: The engine adopts water-cooling technology, which achieves high combustion efficiency and anti-aging. The engine's compression ratio is increased to 11:1, which is 20% higher than motorcycles of the same displacement.
Was this review help?
7
1
Share
More Forum Discussions

Will spray paint corrode the original car paint?

Spray paint does not corrode the original car paint, but it may cause 'paint lifting,' resulting in irregular patterns. Here is some relevant information about spray paint: 1. Introduction: Spray paint, also known as aerosol paint, typically consists of an aerosol can, aerosol valve, contents (paint), and propellant. It is paint that has been specially treated and pressurized for easy spraying, also referred to as manual spray paint. 2. Uses: Spray paint has a wide range of applications. With recent economic development, its uses have expanded from initially repairing paint flaws to molds, industrial machinery, toys, crafts, musical instruments, buildings, steel structures, advertising and promotional industries, signage, graffiti, and more. It is even used in less industrialized areas like grasslands and pastoral regions, where spray paint colors are reportedly used to distinguish livestock herds among different breeders.
2
4
Share

Does the vehicle license have an expiration period?

The vehicle license is valid for the long term, but it still requires annual inspection. Here is an introduction to the relevant content: 1. Annual inspection expiration: The supplementary page indicates the inspection validity period, which is essentially the annual inspection due date. 2. Different validity periods: The validity period of the vehicle license is also linked to the annual inspection. Different types of vehicles have different validity periods. Below is extended information on how to handle an expired vehicle license inspection validity period: 1. Conditions: Vehicle owners with an expired license should promptly drive their vehicle and bring the original vehicle license and the original compulsory motor vehicle traffic accident liability insurance certificate (valid for more than 15 days) to the local vehicle management office where the vehicle is registered to complete the annual inspection. 2. Notes: The vehicle license does not actually have a fixed expiration period because each time it passes an annual inspection, the validity period on the license changes. Therefore, an expired vehicle license essentially refers to an expired vehicle inspection.
8
1
Share

What does the CLR button mean?

In a car, the CLR button is used to select a function or confirm a piece of information. Here are some related details about CLR: 1. Function: The trip computer displays the trip mileage, average speed, and average fuel consumption. If you press and hold the CLR button at the top of the control lever, a prompt tone will sound, and then the trip mileage and average speed will be reset, while the average fuel consumption will revert to the initial average. 2. Usage Method: Press the MENU button to enter the trip computer display settings. Three lines of code will appear, with the top line being one of the numbers 1, 2, or 3. Press the CLR button to enter the format selection interface, where two lines of code will appear. The bottom line corresponds to the first line of numbers from the previous interface. Turn the knob to select one of the numbers 1, 2, or 3, then press CLR again to save. Exit back to the three-line code interface, and press MENU to return to the trip computer display interface.
19
3
Share

Can the ETC card still be used after being removed and reinserted?

The card can be used after reinsertion. According to the "Rules for the Use of Non-Stop Rapid Passage System," the ETC card must be inserted into the OBU device to function properly; otherwise, user information cannot be read. If the card is removed, you can use the manual lane and have the staff swipe the card for you. When the ETC card is inserted into the OBU device, a prompt sound will be heard, indicating that the device is activated. If the card is not inserted, the device remains in a dormant state and cannot recognize vehicle information at toll stations. Therefore, the ETC cannot be used without the card, and it must be reinserted when needed. ETC is an electronic toll collection system, also known as an automatic road toll system. It is specifically designed for toll roads, commonly found on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. ETC Deduction Principle: Highways have one or more ETC lanes. Communication between the vehicle's electronic tag (installed on the windshield) and the microwave antenna in the ETC lane enables toll payment without stopping at the toll booth. This is achieved through computer networking technology and bank settlement, operating on a "pass first, deduct later" principle. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by avoiding stops at toll booths. Cost-saving: Minimizes vehicle wear and fuel consumption by reducing frequent starts and stops. Improved efficiency: ETC lanes can theoretically increase traffic flow efficiency by 2-3 times, making traditional ETC faster and more advanced. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of "achieving interoperability of transportation cards in key city clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC." It also sets a target of "50% ETC usage rate for road passenger vehicles by 2020." Future possibilities: Beyond improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will promote ETC use for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication and vehicle-to-infrastructure coordination in smart transportation development, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC usage.
12
4
Share

How to Identify Spark Plug Materials?

The material of a spark plug can be determined by the central core of the electrode. If it is thick, it is a standard type; if it is thin and white in color, it is platinum; if it is thin and yellow in color, it is iridium. Related Information: 1. Introduction: The spark plug is one of the critical components in a car's ignition system. It introduces high-voltage current into the cylinder to generate an electric spark, thereby igniting the air-fuel mixture inside the cylinder. Factors affecting the performance of a spark plug include the gap between the electrodes, which should neither be too large nor too small. 2. Gap: If the gap between the spark plug electrodes is too small, the resulting spark will be weak, leading to carbon buildup and subsequent electrical leakage. If the gap is too large, the required voltage to bridge the gap will be higher, making the engine harder to start, especially at high speeds, potentially causing a "misfire." The main components of a car spark plug include: the insulator, shell, side electrode, center electrode, terminal nut, and terminal stud.
16
3
Share

Can vehicle inspection be conducted in advance?

According to Article 40 of Order No. 102 issued by the Ministry of Public Security of the People's Republic of China, the owner of a motor vehicle may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. The following is extended information: 1. Motor vehicle owner: Before applying, the motor vehicle owner should resolve all road traffic safety violations and traffic accidents related to the vehicle. When applying, the motor vehicle owner should fill out an application form and submit the vehicle license, compulsory traffic accident liability insurance certificate for motor vehicles, and motor vehicle safety technical inspection compliance certificate. 2. Vehicle management office: The vehicle management office should, within one day from the date of acceptance, confirm the motor vehicle, review the submitted certificates and vouchers, and issue the inspection compliance mark.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.