What is the fuel consumption of the Jianghuai Refine 2.0?

2 Answers
MatthewRose
07/23/25 8:00pm
The Jianghuai Refine 2.0 has a fuel consumption of 11.4L per 100 kilometers. Poor driving habits: Habits such as weaving through traffic, sudden stops and starts, and driving at high speeds in low gears can all lead to high fuel consumption. Engine carbon buildup: Carbon buildup in the engine can also cause increased fuel consumption. Low tire pressure: Low tire pressure or underinflated tires can also result in higher fuel consumption. Before driving, it's advisable to check the tire inflation. There are instruments available to measure tire pressure, and maintaining proper inflation can help reduce fuel consumption. Overloaded trunk: Carrying too many items in the trunk can also increase fuel consumption. Regularly clearing out unnecessary items from the trunk can help reduce fuel usage.
Was this review help?
3
0
Share
DeBriella
08/10/25 5:57pm
I've been driving the Jianghuai Refine 2.0 for several years now, and I find its fuel consumption quite reasonable. In city driving with frequent traffic jams, it can reach about 12 liters per 100 kilometers, but on the highway, it easily drops to around 7 liters. On average, it's about 9 liters combined. Don't underestimate driving habits—if you frequently floor the accelerator or overuse the air conditioning, fuel consumption can increase by one or two liters, especially during hot summer days when the impact is greater. I make it a habit to check tire pressure monthly, keeping it at the recommended value, which helps save some fuel. Regular maintenance is also crucial—don't delay replacing the air filter and engine oil, as poor engine efficiency leads to higher fuel consumption. Overall, as a family MPV, this fuel consumption is fairly reasonable—more economical than some SUVs, though it can't compete with hybrid vehicles. After driving it for a while, paying attention to daily maintenance and driving habits can save you a lot of money.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

How to Engage Reverse Gear in Santana?

To engage reverse gear in a Santana, first press the gear lever downward from the neutral position, then pull it to the left and push it into the position where first gear is located. Below are the precautions for engaging reverse gear in a Santana: 1. Ensure the vehicle is completely stopped before shifting into reverse. Shifting into reverse while the car is still moving can cause significant damage to the transmission. It can easily lead to gear grinding. The correct method is to stop the car completely and then shift into reverse for backing up. 2. Always depress the clutch pedal fully when shifting into reverse. If the clutch is not fully depressed, gear grinding may occur, which is the sound of gears scraping against each other. Prolonged grinding can wear down the gear teeth, leading to incomplete gear engagement. To avoid this, make sure the clutch is fully depressed. 3. Maintain a slow speed when reversing and avoid pressing the accelerator. Keep the speed low and refrain from pressing the accelerator hard, especially in automatic transmission vehicles, as this can easily lead to accidents. Therefore, always control the speed when reversing.
16
2
Share

Is stopping for several seconds at a highway ramp entrance considered a traffic violation?

Yes, it is a violation. Motor vehicles are not allowed to stop on highways, whether in regular lanes or at ramp entrances. Under non-emergency circumstances, motor vehicles are prohibited from stopping while driving on highways. If stopping is necessary or in case of an emergency, the highway traffic management department of the public security authority should be contacted promptly. Highway violations: Traffic violations committed by motor vehicles on highways must be addressed. Regardless of where, when, or under what circumstances the violation occurs, it must be dealt with. Failure to promptly address traffic violations will result in the motor vehicle being considered in an abnormal status. Impact on vehicle annual inspection: If traffic violations are not addressed, they will affect the normal annual inspection of the motor vehicle. Vehicles that fail the annual inspection are not permitted to drive on the road, and doing so constitutes a violation. If a vehicle fails to undergo the annual inspection for three consecutive inspection cycles, it will be forcibly scrapped.
12
0
Share

What are the dimensions of non-motorized vehicle parking spaces?

Below are the dimensions for non-motorized vehicle parking spaces: 30-degree angle parking: For single-row, 30-degree angle parking, the parking strip width is 1 meter, the lateral spacing between vehicles is 0.50 meters, and the unit parking area is 2.20 square meters; 45-degree angle parking: For single-row, 45-degree angle parking, the parking strip width is 1.4 meters, the lateral spacing between vehicles is 0.50 meters, and the unit parking area is 1.84 square meters; 60-degree angle parking: For single-row, 60-degree angle parking, the parking strip width is 1.70 meters, the lateral spacing between vehicles is 0.50 meters, and the unit parking area is 1.85 square meters; Vertical single-row parking: For vertical single-row parking, the parking strip width is 2 meters, the lateral spacing between vehicles is 0.60 meters, and the unit parking area is 2.1 square meters.
4
3
Share

What is the fuel tank capacity of the DX3?

Southeast DX3 has a fuel tank capacity of 45 liters, which is the officially announced data. Owners who have purchased the Southeast DX3 can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the Southeast DX3 is 92 octane, with a fuel consumption of 6.9 to 7.3L per 100 kilometers. A full tank can cover a distance of 616 to 652 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. The fuel level is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked fuel tank capacity.
17
2
Share

What type of engine oil is suitable for the Kia K5?

The Kia K5 can use engine oil with a viscosity grade of 5W30. For models equipped with turbocharged engines, it is recommended to use full synthetic oil with a viscosity of 40. For models with naturally aspirated engines, it is recommended to use full synthetic oil with a viscosity of 30. 5W-30 refers to its SAE standard viscosity rating. This viscosity value first indicates that the oil is a multi-grade oil. The 'W' stands for WINTER, and the number before the 'W' represents the oil's flow performance at low temperatures—the smaller the number, the better the starting performance in cold conditions. The number after the 'W' indicates the oil's stability at high temperatures (i.e., its resistance to thinning)—the higher the number, the better the oil's high-temperature stability. Engine oils are generally categorized into three types: conventional mineral oil, semi-synthetic oil, and full synthetic oil. Mineral oil is inexpensive but has shorter service life and inferior lubrication performance compared to synthetic oils, and it also causes more environmental pollution. Semi-synthetic oil is very close in purity to full synthetic oil, though its cost is slightly higher than mineral oil, making it an ideal transitional product between mineral and synthetic oils. Full synthetic oil has a well-arranged molecular structure, giving it strong resistance to external variables. As a result, it offers superior thermal stability, oxidation resistance, and viscosity stability compared to mineral and semi-synthetic oils.
20
3
Share

What Do You Need to Bring to a 4S Store to Get a Key?

To get a car key at a 4S store, you need to bring your ID card and the key code strip. Get the key matched as soon as possible: Losing a car key is most worrying because someone with ill intentions might pick it up and then steal items from the car or even the vehicle itself. Therefore, when a car owner discovers that a key is lost, they should go to the 4S store as soon as possible to get the key matched. The original key data stored in the car's computer will be erased, and the spare key will be rematched through online diagnostics. However, 4S stores charge for each key data matching session, and a fee is required for each matching process. Call the insurance company to file a record: After this process, the previously lost key will be invalid and unable to start the vehicle, but it can still open the car's mechanical door lock, which still poses some risk. Therefore, the most reliable approach is to replace the entire lock set as well. In addition to clearing the original key data at the 4S store, the car owner should also call the insurance company to file a record and understand the relevant compensation details for vehicle theft, in case evidence is lacking when filing a claim after the car is stolen. However, getting a new key is not covered by the insurance company's compensation, and this cost must be borne by the car owner.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.