What is the fuel consumption of the Jetour X70 Plus 1.5T?

2 Answers
HadleyRose
07/28/25 10:45pm
The actual measured average fuel consumption of the Jetour X70 Plus is 8.17 to 9.43L per 100 kilometers. Automobile fuel consumption: Generally, the vehicle's onboard computer will display the average fuel consumption value on the dashboard, but it often differs from the actual fuel consumption. Specific vehicle fuel consumption can be calculated using a formula. Fuel consumption considerations: Plan your route before driving, check traffic conditions, and try to avoid roads prone to traffic jams. Maintain a steady speed while driving, as unstable driving speeds can increase fuel consumption by approximately 6% in suburban areas and 2% in urban areas. Avoid carrying unnecessary items in the car to reduce vehicle weight.
Was this review help?
18
3
Share
TimothyDella
08/12/25 3:14am
I've researched the Jetour X70 Plus 1.5T SUV, which has an official combined fuel consumption of around 7.5L/100km, but actual driving conditions can vary significantly. In urban traffic jams or when using air conditioning, it can rise above 9L; on highways, it's much more economical, easily dropping to around 6.5L. After test driving it for a few days, I found its overall performance balanced—the engine technology is mature, providing adequate power while being fuel-efficient, making it suitable for daily commutes and long trips. If you often drive in the city, maintaining good driving habits like avoiding sudden braking and regular maintenance can help keep consumption below 8L. A full tank can cover over 500 kilometers, which is quite cost-effective, plus it offers spacious and comfortable interiors. Just remember to check tire pressure regularly, as low pressure increases fuel consumption. Overall, it's an economical choice among domestic vehicles in terms of fuel efficiency.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What are the types of Castrol engine oils?

Castrol engine oils are divided into five major series: Edge, Magnetec, GTX, GTX Ultra, and GTD. If categorized by full synthetic, semi-synthetic, and mineral oils, their classifications are as follows: full synthetic includes Edge and Magnetec Stop-Start, semi-synthetic includes Magnetec, while GTX, GTX Ultra, and GTD are mineral oils. The product types of Castrol engine oils are as follows: 1. Edge: This is Castrol's top-tier engine lubricant, on par with Mobil 1 and Shell Helix Ultra. Edge incorporates a unique liquid titanium formula, offering exceptional oil film adaptability that effectively reduces direct metal-to-metal contact under various driving conditions, naturally minimizing friction losses. Edge meets the demanding high-temperature, high-pressure requirements of modern high-performance engines. It also effectively reduces deposits, keeping the engine clean and enhancing power performance. 2. Magnetec (Magnetec and Magnetec Stop-Start): Although both belong to the Magnetec series, Magnetec Stop-Start is a full synthetic lubricant, while Magnetec is only semi-synthetic. Despite sharing the same API SN rating, Magnetec Stop-Start is significantly more expensive than Magnetec due to its different formulation. 3. GTX/GTX Ultra/GTD: The primary function of these three is to combat sludge and protect the engine. In terms of performance strength, GTX is the strongest, followed by GTX Ultra, which offers better longevity than GTX; GTD is the weakest and also Castrol's most economical lubricant, more suitable for high-mileage engines.
19
5
Share

Why Can't the Motorcycle Steering Lock Turn?

If the motorcycle steering lock cannot be turned, you can use a rust remover to spray the steering lock several times, wait a few minutes, spray again, and then try unlocking with the key after half an hour. Below are the specific details about the steering lock: 1. Introduction: The structure of the steering lock is designed to be difficult to pry, thereby enhancing anti-theft effectiveness. The advantages and effects of this design lie in solving the problem of traditional anti-theft locks being easily damaged and failing to prevent theft. This design is simple in structure, low in cost, easy to operate, and suitable for industrial production. 2. Composition: A steering lock installed in the front fork steerer tube of bicycles, motorcycles, or cars, belonging to a pin tumbler lock, consists of a lock body, lock cylinder, springs, and pins. When locking, the key is used to rotate the lock cylinder out from the lock body. The lock cylinder, fixed on the lock body, passes through the front fork steerer tube and the front connecting tube, preventing relative rotation between them. The lock cylinder is characterized by being composed of a main lock cylinder and a secondary lock cylinder. The front part of the main lock cylinder has a cylindrical structure, with the inner hole serving as the keyhole. Inside the main and secondary lock cylinders, there is a set of pin holes arranged in a cylindrical structure, with the axes of the pin holes parallel to the axis of the lock cylinder.
19
1
Share

What is the process of Subject 2 and the time limit for each item?

There are time limits for Subject 2, which generally consists of five major test items, each with its own time limit. Here are the details: 1. Reverse parking into a garage: The completion time for this item must not exceed 3.5 minutes. 2. Pole test (A1, A3, B1, B2): The completion time must not exceed 8 minutes. 3. Parking and starting on a slope: The starting time must not exceed 30 seconds. 4. Parallel parking: The completion time must not exceed 1.5 minutes. 5. Narrow road U-turn (A1, A2, A3, B1, B2): The operation time must not exceed 5 minutes.
7
2
Share

How to Turn Off the Auto Start-Stop Function in Volkswagen Cars?

Taking the Lamando as an example, the auto start-stop function uses a mechanical button. To turn it on or off, simply press the button. Below is some relevant information about the auto start-stop function: 1. Usage Notes for Auto Start-Stop: The auto start-stop function will shut off the engine. Unless the vehicle is also equipped with an auto-hold function, you must keep your foot on the brake during this process. 2. Tips for Using Auto Start-Stop in the Volkswagen Lamando: (1) The auto start-stop function can only be permanently disabled by modifying the vehicle's code. For normal use, the driver must manually turn it off each time. (2) During heavy traffic on holidays, turning off this function can make driving more comfortable. Otherwise, frequent restarts may occur, and you might be more susceptible to being cut off by other drivers. (3) When starting on a slope, turn off the auto start-stop function. A slow response during startup could lead to the vehicle rolling backward, creating a dangerous situation. 3. Possible Reasons Why the Auto Start-Stop Function in the Volkswagen Lamando May Not Work: (1) The function does not operate when the battery charge is below 60%. (2) The interior temperature is below 20°C, or the outside temperature is below 4°C. (3) The engine has not reached the standard operating temperature. (4) The steering wheel is turned too far, exceeding 30 degrees.
13
2
Share

What Causes the Peeling of Car Wrapping Film?

Reasons for the peeling of car wrapping film: Presence of Moisture: If bubbles appear shortly after applying the film to the rear windshield, typically appearing as white spots, it is due to improper handling of moisture between the film and the glass during application. Use of Low-Quality Film: If bubbles appear several years after application and gradually increase in number and size, this is caused by the use of low-quality film. Over time, exposure to UV rays can cause low-quality films to release toxic gases such as formaldehyde, leading to bubble formation. Poor-quality films, with issues like aging adhesive layers, rough film structure, and easy detachment, are prone to bubbles and ripples when exposed to UV light.
14
0
Share

How to Conduct Annual Inspection for Vehicles with 8-Year Exemption?

Vehicles are exempt from inspection for the first six years, after which they must undergo on-site testing to obtain the annual inspection sticker. Vehicles in their eighth year are no longer exempt and cannot apply for the exemption sticker online. Instead, they must be taken to the vehicle management office for on-site inspection to receive the annual inspection sticker. Therefore, for the eighth year, you should schedule an appointment with the vehicle management office for the annual inspection within three months before the inspection deadline. Alternatively, you can follow the dates suggested by the Traffic Management 12123 app to legally arrange your inspection. Annual Inspection Procedure: First, after submitting the inspection application, the vehicle must undergo on-site testing. Drive the vehicle into the automatic inspection area to sequentially check the exhaust emissions, speed, lights, side slip, and chassis for compliance with standards. Only if all items pass can the inspection be completed. Next is the visual inspection, which verifies the accuracy of the vehicle's license plate, type, body color, engine number, VIN code, and frame number. Then, inspect the vehicle's exterior, including details such as the bumper, engine compartment, rearview mirrors, under-mirrors, window glass, paint, engine operation condition, and the interior and wheels of passenger vehicles. Finally, the owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle registration certificate and compliance label. If any items fail, the owner must repair the vehicle and participate in a re-inspection until all items pass before proceeding with the visa procedures.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.