What is the fuel consumption of the Jetour X70?

What type of engine oil is suitable for the Volkswagen Santana?

Volkswagen Santana is suitable for using 30-viscosity semi-synthetic or fully synthetic engine oil. Introduction to 30-viscosity semi-synthetic engine oil: 30-viscosity semi-synthetic engine oil is generally suitable for mid-to-low-end naturally aspirated engine models. As long as it is not a turbocharged engine or a high-end, large SUV model, this semi-synthetic engine oil can be used. The replacement cycle for semi-synthetic engine oil is about 8 months, and it should generally be replaced after about 7,000 kilometers. Introduction to fully synthetic engine oil: Automotive fully synthetic engine oil is a type of engine oil with better cleaning and oxidation resistance, entirely composed of synthetic compounds. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties. Additives can compensate for and improve the shortcomings of the base oil's performance and provide certain new properties, making them an important part of lubricating oil.

7

2

Share

What is the fuel consumption of the Skyworth ME5 when the battery is depleted?

The fuel consumption of the Skyworth ME5 when the battery is depleted is 4.9 liters per 100 kilometers. Introduction to fuel consumption when the battery is depleted: Battery depletion refers to the situation where the battery in the vehicle's engine compartment cannot reach its normal charge level. Long-term battery depletion indicates that the vehicle's battery has reached its replacement cycle. The fuel consumption of a motor vehicle refers to the amount of fuel consumed per 100 kilometers, which is displayed on the vehicle's dashboard, allowing the driver to have a certain understanding of the fuel consumption during driving. Concept of fuel consumption: Fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on good road conditions. Since driving at a constant speed is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy. China also adopts this indicator, and the fuel consumption per 100 kilometers indicated in the manuals of domestic cars is generally the constant-speed fuel consumption.

18

2

Share

Why is the car very noisy when the air conditioner is turned on?

It could be due to a dirty or stuck throttle valve; abnormal noise from the air conditioning pump; or improper tension of the compressor drive belt. Reasons for abnormal noise from the air conditioner: 1. Dirty or stuck throttle valve: After the air conditioner is turned on, the compressor will also start working, and the compressor is driven by the engine. Therefore, turning on the air conditioner will increase the engine load, which means the engine needs to increase the throttle opening to allow more air intake. When the throttle valve has carbon deposits or is stuck, it can cause engine shaking and abnormal noise. This becomes more noticeable after the air conditioner is turned on. 2. Abnormal noise from the air conditioning pump: There are two main reasons for abnormal noise from the air conditioning pump: the electromagnetic clutch and the bearings inside the air conditioning pump. Noise from the electromagnetic clutch is mainly caused by wear and increased gap, while noise from the air conditioning pump bearings is mainly due to insufficient lubrication. If these issues are not resolved promptly, they can lead to the air conditioning pump burning out and failing to perform cooling work. 3. Improper tension of the compressor drive belt: If the drive belt is too loose, the electromagnetic clutch is prone to slipping; if the drive belt is too tight, the load on the electromagnetic clutch will increase. Improper tension of the drive belt can cause abnormal noise in mild cases and damage the air conditioning compressor in severe cases.

15

2

Share

Is Vehicle Undercoating Necessary?

Vehicle undercoating is necessary because it provides better protection for the vehicle's chassis. Here are some relevant details about vehicle undercoating: 1. Protection Against Weather Conditions: Various factors such as summer ground heat, acid rain, atmospheric moisture, salt, and winter road de-icing agents can all corrode the vehicle's undercarriage. Undercoating effectively prevents rust and premature aging. Even in the warm, humid climates of coastal cities, salty sea breezes won't leave the chassis riddled with damage. 2. Defense Against Gravel Impact: When driving on rough roads, gravel and stones kicked up by the road can continuously impact the chassis and wheel hubs. Undercoating protects the original anti-rust paint and zinc coating on the chassis, preventing exposed metal from coming into contact with moisture and acid rain, which can cause rust. It also strongly resists the rapid spread of rust, which can corrode the vehicle's internal components. 3. Enhanced Driving Safety: A damaged chassis can lead to deformation of certain parts, particularly components like the upper and lower control arms and tie rods. Even minor impacts can cause slight leaks in the oil pan or transmission fluid pan. These deformations and leaks are hard to detect but can severely compromise driving safety. With undercoating for impact and rust protection, the chassis remains undamaged, ensuring safety.

12

5

Share

Where is the Warm Air in Wuling Capgemini?

Wuling Capgemini's warm air is located at the rear side of the front center armrest. Steps to turn on the warm air in Wuling Capgemini: Find the switch settings at the rear side of the front center armrest; adjust the air direction, wind speed, and temperature to activate the rear warm air function. Since the heat source for the vehicle's warm air function generally comes from the engine's heat, turning on the warm air function does not consume more electricity than turning on the cold air function. Therefore, drivers do not need to worry about increased fuel consumption due to using the warm air. Correct method to use the warm air: Turning on the warm air immediately after starting the car can increase the engine's burden and accelerate engine wear, potentially damaging the engine over time. It is recommended to wait about 5 to 10 minutes after starting the engine, when the water temperature gauge rises to half of the normal temperature, before turning on the warm air. Additionally, after turning on the warm air, first use the external circulation to expel the stale air inside the car, then switch to internal circulation after a few minutes to maintain the interior temperature.

12

4

Share

What should I pay attention to when I just got my driver's license?

New drivers on the road need to pay the most attention to the transition in both skills and mindset, followed by traffic common sense. Here are some relevant introductions for new drivers: 1. Skills and mindset: Skills require practice—find a less crowded area to practice more. The mindset needs to shift from the test environment (Subject 3) to actual road conditions. Driving during Subject 3 and driving after obtaining the license are two different things. During Subject 3 practice, you are driving a training vehicle. 2. Displaying the probationary sign: However, after getting the license and driving a private car on the road, other drivers may not be as courteous. Therefore, it is necessary to affix a probationary sign in the appropriate position on the car to let others know you are a beginner, which enhances safety. 3. Following distance: Another key point is understanding the following distance. In Subject 3, the following distance is based on specific tasks. During practice, you follow a fixed sequence on a fixed route, and the actions of the vehicle ahead are predictable. Real driving is different because you cannot anticipate what the car in front will do next. Many drivers in China do not use turn signals and often brake abruptly, which can lead to accidents if the following driver lacks experience. Although maintaining a safe distance is challenging in urban areas.

12

4

Share

What is the fuel consumption of the Jetour X70?

What type of engine oil is suitable for the Volkswagen Santana?

What is the fuel consumption of the Skyworth ME5 when the battery is depleted?

Why is the car very noisy when the air conditioner is turned on?

Is Vehicle Undercoating Necessary?

Where is the Warm Air in Wuling Capgemini?

What should I pay attention to when I just got my driver's license?

What Are the Reasons for Normal AC Pressure But No Cooling?

Why does the Audi have a jerking sensation when starting?

How many seats does the Changan Oushang X7 Plus have?

What Happens If a Car Lacks Antifreeze?