What is the fuel consumption of the Infiniti QX50?

1 Answers
LeGiselle
07/30/25 10:05am
The combined fuel consumption of the Infiniti QX50 is 7.7-8.2L/100km. The 2022 Infiniti QX50 currently has 8 models on sale. The two-wheel-drive Fashion Edition and two-wheel-drive Elite Edition have a combined fuel consumption of 7.7L/100km. The two-wheel-drive Navigation Edition and four-wheel-drive Elite Edition have a combined fuel consumption of 7.8L/100km. The four-wheel-drive Intelligent Edition, four-wheel-drive Luxury Edition, four-wheel-drive Flagship Edition, and four-wheel-drive Navigation Edition have a combined fuel consumption of 8.2L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 7.7-10.6L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to burn, which increases fuel consumption. Additionally, low temperatures cause the engine computer to control higher idle speeds to warm up the engine, further increasing fuel consumption.
Was this review help?
4
2
Share
More Forum Discussions

How Do Driving Schools Recruit Students?

Here are the methods for driving schools to recruit students: 1. Establish registration offices in high-traffic areas to enhance visibility and credibility. 2. Launch different advertising slogans during different periods and under different policies to increase enrollment numbers. 3. Focus on promotional campaigns, recruit student agents, and offer corresponding rewards for in-depth promotion. Additional Information: Students can enroll as long as the driving school is legitimate. Required documents for registration may include copies of ID cards, residence permits, etc., with some regional variations in the specific documents needed.
19
2
Share

Can auxiliary license plates be installed?

A vehicle can only have one license plate; auxiliary plates cannot be installed. Here is some information about license plates: Introduction: License plates, commonly known as vehicle tags, are plates affixed to the front and rear of a vehicle. Materials: They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. Purpose: License plates serve to identify and register vehicle information. Their primary function is to indicate the vehicle's registered region and allow authorities to trace the owner and registration details of the vehicle.
18
3
Share

What are the incorrect methods to use when sudden brake failure occurs on a downhill slope?

When sudden brake failure occurs on a downhill slope, do not pull the parking brake lever tightly or downshift by skipping two gear levels. Below are the correct methods to handle brake failure: 1. Stay calm: Maintain composure during brake failure and also control the vehicle's direction. 2. Use external forces to stop: Utilize surrounding obstacles like flower beds, tree trunks, or the mountain side or walls along the road to stop the vehicle. 3. Use an escape ramp: On highways, traffic authorities construct escape ramps. In case of brake failure, you can drive the vehicle directly onto an escape ramp.
13
1
Share

What is the principle of electromagnetic shielding?

Here is the principle of electromagnetic shielding: 1. Electromagnetic shielding is the use of conductive materials to reduce the penetration of alternating electromagnetic fields into a specified area. 2. It utilizes the reflection, absorption, and guidance of electromagnetic energy flow by the shielding body, which is closely related to the induced charges, currents, and polarization phenomena on the surface and inside the shielding structure. The two factors affecting the shielding body are as follows: 1. The entire surface of the shielding body must be electrically continuous. 2. There should be no conductors that directly penetrate the shielding body. Additional information: The method to solve electromagnetic wave leakage is to fill the gaps with conductive elastic materials to eliminate non-conductive points. This is similar to filling rubber in the gaps of a fluid container. Such elastic conductive filling material is called an electromagnetic sealing gasket.
12
0
Share

Where is the engine of GAC Trumpchi GS4 produced?

GAC Trumpchi GS4's engine is produced in China, with the following specifications: it is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169ps, a maximum torque of 265Nm, a maximum power speed of 5000rpm, and a maximum torque speed ranging from 1700 to 4000rpm. It is paired with a 6-speed manual transmission. The dimensions of the GAC Trumpchi GS4 are: length 4545mm, width 1856mm, height 1668mm, wheelbase 2680mm, minimum ground clearance 190mm, and a body weight of 1480kg.
14
3
Share

What is the power output of the Prado 4000?

The Prado 4000 has a power output of 202kW, with a maximum horsepower of 275ps. Its maximum power is achieved at 5600rpm, and it delivers a maximum torque of 381nm at 4400rpm. The vehicle dimensions are: length 4820mm, width 1885mm, height 1890mm, with a wheelbase of 2790mm and a minimum ground clearance of 215mm. The Prado 4000 is equipped with a 4.0L V6 naturally aspirated engine, paired with a 5-speed automatic transmission. It features a double-wishbone independent front suspension and a four-link non-independent rear suspension.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.