What is the fuel consumption of the Hyundai ix25?

1 Answers
VanCamila
07/30/25 4:18am
The fuel consumption of the Hyundai ix25 is as follows: 1. The 1.5L, 6-speed manual version of the ix25 has a MIIT combined cycle fuel consumption of 5.8L/100km. 2. The 1.5L, CVT version of the ix25 has a MIIT combined cycle fuel consumption of 5.3L/100km. 3. The 1.4T, 7DCT version of the ix25 has a MIIT combined cycle fuel consumption of 6.5L/100km. Below is an introduction to fuel consumption: 1. The fuel consumption provided by MIIT is often 1-2L/100km lower than the average real-world fuel consumption reported by owners. 2. China adopts the European NEDC cycle standard, which involves testing the vehicle on a dynamometer with cycles of idling, constant-speed driving at 20/40/60/80 km/h, acceleration from 40-80 km/h, deceleration from 80-20 km/h, and finally returning to idle. 3. Each test segment lasts 10-15 minutes, and the fuel consumption data from these segments are combined to derive the final combined cycle fuel consumption.
Was this review help?
20
5
Share
More Forum Discussions

How to Turn on the Heating in Volkswagen Lavida?

Lavida's air conditioning heating is activated by rotating the knob. The method to turn on the heating in Lavida is as follows: 1. Start the Volkswagen Lavida and wait for 5-10 minutes until the water temperature rises to normal operating temperature; 2. Adjust the air circulation mode to internal circulation; 3. Switch the air conditioning to heating mode - rotating the knob to the blue bar indicates cold air, while rotating to the red bar indicates warm air; 4. Adjust the air conditioning to the appropriate gear and set the air outlet direction. Options include defrosting the windshield, blowing towards passengers, directing air to passengers' feet, or a combination of windshield and passenger airflow - select according to your needs.
14
0
Share

How Many Cylinders Does the Chevrolet Orlando Have?

Chevrolet Orlando is equipped with a three-cylinder engine. The specific details are as follows: 1. The Chevrolet Orlando is powered by a 1.3T turbocharged engine, with a maximum power output of 120kW and a maximum torque of 230N·m. It is paired with a 6-speed automatic transmission; 2. This engine incorporates advanced technologies such as an efficient combustion system, electronically controlled turbocharging, and single-cylinder dual injection. These technologies not only improve the engine's fuel economy but also enhance its power output, reducing overall vehicle operating costs.
19
2
Share

How to Deal with Foul Odor in Lancer Air Conditioning?

Regularly clean and replace the air conditioning filter. Other methods are as follows: 1. Buy two lemons and place them in the car. For faster results, slice the lemons and place a few slices at the air vents, then turn on the cold air. Soon, the air inside the car will become fresh and fragrant. 2. Used honeycomb coal: Place honeycomb coal in the car, but make sure it has been burned before, as it is particularly effective. It’s best to use intact honeycomb coal, following the principle of adsorption. 3. The odor in a new car is often a sign of air pollution inside the vehicle, possibly releasing harmful substances like formaldehyde and benzene. When the car is not in use, place a small bucket of water with some vinegar inside the car. Repeat this several times, and the odor will gradually disappear. The reason is: water can adsorb formaldehyde, while vinegar helps stabilize it. 4. Onions: Slice a few onions, place them in a basin of water, stir, and then leave them in a newly renovated room to remove odors. This method can be slightly adapted for use in cars. Cut a whole onion into four pieces and place them in the car. 5. Use the air conditioning less frequently and often open the car windows to allow for better ventilation, ensuring fresh air circulation inside the car.
20
0
Share

How many kilometers should the timing belt of Golf VII be replaced?

Golf 7 cars should have their timing belts replaced every five years or every 100,000 kilometers. The Volkswagen Golf 7 has two engines that use timing belts for transmission, which are the 1.2T and 1.4T EA211 engines. More details about the timing belt are as follows: 1. The internal components of the engine timing belt consist of six parts: the timing belt, timing belt tensioner, guide pulley, intake camshaft pulley, exhaust camshaft pulley, and crankshaft pulley; 2. Timing belt transmission produces less noise than chain transmission engines, operates more smoothly, and the maintenance cost of timing belts is much lower than that of chain transmission engines.
2
3
Share

What is the positioning of the Haval H2?

Haval H2 is positioned as a compact SUV. Here are the details about the Haval H2: 1. The body dimensions are 4330mm in length, 1815mm in width, and 1700mm in height, with a wheelbase of 2560mm; 2. The vehicle continues the Haval family design with hexagonal and large U-shaped grille designs, complemented by standard LED daytime running lights with a diamond-like effect, creating a highly recognizable front face; 3. It comes standard with features such as EPB electronic parking brake, AVH auto hold, multifunction steering wheel, keyless entry and start system, and heated exterior mirrors.
5
5
Share

How Many Kilometers Should the Spark Plugs of Volkswagen Santana Be Replaced?

The replacement interval for spark plugs in Volkswagen Santana is 20,000 kilometers. If the spark plugs are not replaced for a long time, it can cause various issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in ignition, affecting the normal use of the vehicle. Spark Plug Replacement Interval: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is recommended to follow the user manual. The following standards can be used as a reference for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for Replacing Spark Plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage wires according to the ignition sequence and secure the cover.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.