What is the fuel consumption of the Hummer H2?

1 Answers
DelPreston
07/30/25 9:36am
The fuel consumption of the Hummer H2 is approximately 25 to 30 liters per 100 kilometers. When driving in congested urban roads, the fuel consumption can reach around 30 liters per 100 kilometers. Below is additional information about the Hummer H2: 1. The Hummer H2 is a heavyweight hardcore off-road vehicle. It is equipped with two engines: a 6.2-liter V8 naturally aspirated engine and a 6.0-liter V8 naturally aspirated engine. 2. The 6.2-liter naturally aspirated engine delivers 398 horsepower and a maximum torque of 574 Nm. This engine reaches its maximum power at 5700 rpm and its maximum torque at 4300 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. This engine is paired with a 6-speed automatic transmission. 3. The 6.0-liter naturally aspirated engine also produces 398 horsepower and a maximum torque of 574 Nm. It achieves its maximum power at 5700 rpm and maximum torque at 4300 rpm. This engine also employs multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is matched with a 4-speed automatic transmission.
Was this review help?
3
4
Share
More Forum Discussions

How to Adjust the Brightness of BYD Screen?

Press and hold the adjustment button on the instrument panel, then release the button when the LCD screen displays TRIPB. Turn on the small light or headlight switch of the combination switch. Press and hold the adjustment button without releasing it, and the backlight brightness will start to adjust among three states: brightest, normal, and darkest. After adjustment, press the adjustment button again to switch the odometer display from TRIPB to ODO.
17
5
Share

Can the clutch be released directly in second gear?

No, the clutch cannot be released directly. Here is the relevant introduction about the clutch: Clutch: The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power from the engine to the transmission. The principle of releasing the clutch: The principle of releasing the clutch is: "slow at first, fast in the middle, and coordinated at the end." When initially pressing down, it should be done quickly and all the way to the bottom. When lifting the pedal, the free travel should be quick, slow when nearing contact, and pause slightly at the semi-engagement point before releasing completely. The key point of this process is to accurately locate the semi-engagement point. To control the vehicle speed effectively, the semi-engagement point serves as the boundary: lifting quickly above it and lowering slowly below it, adjusting downward to select a speed suitable for oneself.
8
1
Share

What to Do When the Buick Anti-Theft System is Activated and the Car Won't Start?

Insert the key, turn it to power on the entire vehicle, then turn it off. Repeat this process three times consecutively. Disconnect the negative terminal of the battery for about ten seconds to clear the engine's protection data, then reconnect the battery and attempt to start the car again. It is normal for the car's engine anti-theft light to flash once every 1 to 2 seconds.
19
4
Share

Why does the fifth gear automatically disengage on the highway?

Here are the reasons why the fifth gear automatically disengages on the highway: 1. High-speed gear disengagement: High-speed gear disengagement refers to the automatic shift of the transmission from a high gear back to neutral while the car is moving. 2. Reasons: Due to long-term wear on the engaging bodies of the inertia lock ring or the synchronizer cone ring and the internal engaging teeth on the sliding sleeve, a conical shape is formed, thereby generating axial thrust on the engaging teeth. At high speeds, when this thrust exceeds the locking force of the gear spring, gear disengagement occurs. Here is extended information on specific policies for free highway passage: 1. Regulations: According to the "Implementation Plan for Exempting Toll Fees for Small Passenger Vehicles During Major Holidays," the free passage period covers four national statutory holidays—Spring Festival, Tomb-Sweeping Day, Labor Day, and National Day—as well as the consecutive rest days of these statutory holidays as determined by documents from the General Office of the State Council in the current year. 2. Free period: The free period starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday.
6
1
Share

How to Connect Bluetooth to Play Music in a Honda Car?

First, establish a pairing relationship between your phone and the car's Bluetooth device by enabling the Bluetooth function on both your phone and the car's Bluetooth device. Then, search for Bluetooth devices on your phone and select the car's Bluetooth device to pair and connect. Once the car's Bluetooth is successfully paired and connected with your phone's Bluetooth, you can make and receive calls, as well as play music from your phone.
13
4
Share

How to Remove the Glove Box of a Buick Regal?

First, open the glove box on the passenger side. There is a screw in each of these four positions, remove them using a 7MM socket. After removing the four screws, gently lift upwards to detach the glove box. You will see a rectangular box in the middle, which is the cover for the cabin air filter. Push both sides outward and press the middle part to open it, then remove the cabin air filter.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.