What is the fuel consumption of the hs5?

1 Answers
DeCharlie
07/29/25 8:35pm
hs5 fuel consumption is 8.5 liters per 100 kilometers. Automobile fuel consumption: Generally, cars should be economical family models, with 1.0, 1.3, 1.6, and 2.0 cars consuming approximately 5L, 7L, 10L, and 12L per 100 kilometers, respectively. Fuel consumption is a complex factor, depending on the vehicle's performance, road conditions, and the driver's skills. Automobile fuel consumption precautions: Plan your route before driving, check traffic conditions, and try to avoid roads prone to congestion. Maintain a steady speed while driving, avoid carrying unnecessary items, and reduce the vehicle's weight.
Was this review help?
18
3
Share
More Forum Discussions

What engine does the IZOA use?

Toyota IZOA is equipped with an imported M20A engine, and its chassis is built on the TNGA architecture. The overall tuning is quite comfortable, and the transmission is a 10-speed continuously variable transmission imported from Japan, which not only reduces load and wear but also improves dynamic response. Engine Introduction: The car engine is the device that provides power for the vehicle, acting as the heart of the car, determining its power, fuel efficiency, stability, and environmental friendliness. Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines. Engine Classification: Based on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid types, among others.
17
3
Share

What is the button next to the electronic handbrake in the New Bora?

The button next to the electronic handbrake in the New Bora is the auto-hold system. The function of the auto-hold system: The application of AUTOHOLD auto-hold technology allows the driver to avoid unnecessary vehicle sliding without the need for prolonged braking or activating the electronic parking brake. Additionally, this function prevents the vehicle from rolling back when starting on a slope. How auto-hold works: When the vehicle is temporarily stopped and needs to restart after a short period, the parking is handled by the ESP-controlled braking system. The computer uses a series of sensors to measure the vehicle's levelness and wheel torque, judges the tendency of the vehicle to slide, and applies an appropriate braking force to the wheels to keep the vehicle stationary. This braking force is just enough to prevent the vehicle from moving and is not too strong, so that when the accelerator is pressed again to move forward, there won't be a severe jerking motion.
7
4
Share

Can the Weizhi V5 handle long-distance trips?

The Weizhi V5 can handle long-distance trips. Before embarking on a long-distance trip, it is essential to inspect the following: Before the trip, thoroughly check all vehicle components, including tires, lights, fluids, wipers, etc. Especially for long-distance highway driving, a comprehensive inspection is crucial, particularly for the tires. Address any issues promptly. Avoid frequent lane changes during long-distance trips: Generally, highways have three lanes. As a rule of thumb, avoid occupying the overtaking lane or the slow lane for extended periods. It is advisable to stay in the middle lane, as the sides of the road are relatively wider. If an accident occurs involving vehicles to the side or front/rear, drivers in the middle lane can react promptly to avoid collisions. Avoid unnecessary lane changes, as many traffic accidents result from lane-changing maneuvers.
15
1
Share

What transmission is used in the Lavida Start Automatic Fashion Edition?

Lavida Start Automatic Fashion Edition is equipped with an Ericsson 6-speed automatic manual transmission. Functions of the transmission: Under the condition that the engine speed and torque remain unchanged, it changes the driving force and speed of the vehicle (shifting); enables the vehicle to reverse (direction change); and allows the engine to stop without stalling (neutral gear). Maintenance methods for the transmission: Regularly check the fluid level in the transmission to ensure it remains within the specified range, and replenish it promptly based on actual working conditions. When replenishing, ensure that the new fluid is of the same type. When changing the fluid, take advantage of the transmission's operation to promptly drain the old fluid and clean the system. During daily maintenance, inspect the condition of various connection points of the transmission to promptly identify any looseness, wear, or damage. Tighten any loose connections immediately and repair or replace any damaged parts in a timely manner.
8
1
Share

What brand of antifreeze does BMW use?

BMW does not have mandatory brand requirements for antifreeze, but there are specifications for the type. Principles for selecting antifreeze: Choose the freezing point of the antifreeze based on environmental temperature conditions. The freezing point is one of the most important indicators of antifreeze and a key factor in its effectiveness; select antifreeze according to the specific requirements of the vehicle. Generally, imported vehicles, domestically produced vehicles, and mid-to-high-end vehicles should use permanent antifreeze (lasting 2–3 years), while ordinary vehicles can use direct-use antifreeze, and softened water can be used in summer. Hazards of insufficient antifreeze: It can cause the engine or radiator to freeze and crack, leading to engine failure. It also affects the radiator's cooling efficiency, failing to provide the necessary cooling effect. This disrupts normal circulation, generates excessive heat, and in severe cases, can cause engine damage.
16
4
Share

Where is the Nissan Teana's factory plate located?

Nissan Teana's factory plate is located below the right B-pillar, which can be seen by opening the front passenger door. The significance of the vehicle's factory plate is: The vehicle's factory plate is a label indicating the basic characteristics of the vehicle, including the manufacturer, vehicle model, engine model, engine displacement, engine rated power, vehicle identification number, total weight, load capacity or passenger capacity, factory serial number, manufacturing date, country of manufacture, and manufacturer name. The function of the vehicle's factory plate: By checking the vehicle's factory plate, you can confirm information such as the vehicle's displacement and production date. Also, check if there are any signs of tampering or scratches on the plate, as many vehicles' factory plates are installed in places not easily bumped. If the plate has been moved, carefully inspect the vehicle. Different vehicles have their factory plates located in different positions, generally placed in easily observable areas at the front of the vehicle.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.