What is the fuel consumption of the Hongqi HS5?

1 Answers
SavannahRose
07/25/25 4:24am
The fuel consumption of the Hongqi HS5 is 7.9L/100km. Here is more information about the Hongqi HS5: 1. Model Overview: The Hongqi HS5 is an SUV that adheres to the concept of new noble refinement. It is equipped with an active braking system that can detect the distance between the vehicle and the vehicle (or pedestrian) in front in real time. 2. Model Configuration: The Hongqi HS5 uses smooth lines to outline a simple interior, featuring a 12.3-inch integrated full-color LCD display. It is powered by a 2.0L turbocharged engine with a maximum horsepower of 224 hp, a 6-speed AT transmission, a maximum power of 165 kW, and a maximum torque of 340 N·m.
Was this review help?
11
5
Share
More Forum Discussions

Can a stall loudspeaker be connected to a car battery?

Can a stall loudspeaker be connected to a car battery? Introduction to the loudspeaker: The loudspeaker is the audio signal device of a car. During the driving process, the driver issues necessary audio signals as needed and according to regulations to warn pedestrians and attract the attention of other vehicles, ensuring traffic safety. It is also used to urge movement and transmit signals. How the loudspeaker works: The car horn produces sound through the vibration of a metal diaphragm. When the driver presses the horn switch, current flows through the contacts to the coil, generating magnetic force that pulls down the armature, forcing the diaphragm to move. The movement of the armature opens the contacts, interrupting the current and causing the coil's magnetic force to disappear. The diaphragm, along with the armature, returns to its original position under its own elasticity and the action of the spring plate. The contacts close again, completing the circuit, and current flows through the contacts to the coil, generating magnetic force and repeating the above process. This cycle continues, causing the diaphragm to vibrate continuously and produce sound. The resonance plate is rigidly connected to the diaphragm, making the vibration smooth and the sound more pleasant.
19
1
Share

Can I switch from manual to automatic transmission when applying for a driver's license?

If you are learning to drive a manual transmission car for your driver's license, you can switch to an automatic transmission model before taking the Subject 2 test. C1 and C2 driver's licenses are different. For a C1 license, one of the tasks in Subject 3 is to test how the trainee prevents the vehicle from stalling. Since automatic transmission cars do not stall, this cannot be assessed. Therefore, if you want to obtain an automatic transmission driver's license, you should directly apply for a C2 license. The scope of a C1 driver's license includes: small and micro passenger vehicles with a total mass not exceeding 4.5 tons; light and micro cargo vehicles, with the total length of the truck not exceeding 6 meters; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people, meaning you cannot drive vehicles with 9 or more seats, such as some SUVs or MPVs with more than 9 seats. The vehicles permitted under a C2 license include: small and micro automatic transmission passenger vehicles, as well as light and micro automatic transmission cargo vehicles. Like the C1 license, you can only drive automatic transmission cars with 9 or fewer seats and a length not exceeding 6 meters. Additionally, a C2 or higher license also allows you to drive small automatic transmission passenger cars specially designed for upper limb disabilities and vehicles shared with disabled individuals.
9
4
Share

What does the yellow TC indicator light mean?

The TC with a slash yellow light on the car is the Traction Control System, also known as the Track Control System. Generally, when this indicator appears on the car dashboard, it is normal for it to light up when the car is just started. The system will automatically detect the status of the traction control system, and it will turn off after the detection is normal. If it stays on, it may be because the traction control system is turned off, and you need to find the control switch of the system to turn it on, usually located next to the vehicle's gear lever. If it is not because the traction control system switch was accidentally turned off, there may be a fault in the traction control system, and it is necessary to promptly confirm the fault and its cause. If there is a fault, it is necessary to go to a professional repair shop in time. Extended information: 1. The working principle of the traction control system is to replace the mechanical connection between the accelerator pedal and the throttle with an electronic throttle device. The sensor transmits the information of the accelerator pedal to the ECU, and the ECU generates a control voltage signal based on this signal. Then, the servo motor adjusts the throttle according to the signal, thereby reducing the throttle opening and controlling tire slip. For car owners driving in rainy or snowy weather, it can reduce phenomena such as vehicle skidding or loss of control. 2. Because the car's traction control system fails, the car may not be able to obtain the best traction, which may cause the car to not start or accelerate smoothly when driving on slippery roads, and it may still skid in place, leaving the car's drive wheels in a state of idling.
7
5
Share

What are the precautions for picking up a car?

Introduction to precautions for picking up a car: 1. Check all vehicle documents. When picking up the car, be sure to check whether all the vehicle documents are complete, otherwise it will affect subsequent registration, such as the purchase invoice, certificate of conformity, vehicle consistency certificate, motor vehicle registration certificate, three-guarantee certificate, vehicle user manual, new car delivery confirmation form, etc. 2. Inspect the vehicle's exterior. Check for scratches and wear on the paint by parking the vehicle in an outdoor area with sufficient light and then examining whether the paint is even. 3. Check the glass production date. The numbers represent the most recent production year, and the dots represent the production month. If the dots are on the left side of the number, it means the glass was produced in the first half of the year—subtract the number of black dots from 7 to get the specific month. If the dots are on the right side of the number, it means the glass was produced in the second half of the year—subtract the number of black dots from 13 to get the specific month. 4. Check the degree of wear. Observe whether there is obvious wear on the tire surface; new tires usually have intact tread hairs. 5. Inspect the engine compartment. Check if the engine compartment is clean. If the vehicle has been used, some areas may have hidden dirt or accumulated dust. Also, check whether the engine oil and other fluids are sufficient. After starting the engine for a while, check for any oil or fluid leaks in the compartment. Once the engine cools down, check for any abnormalities in the engine oil. 6. Test the vehicle's functions. Test various functions, such as whether the lights work properly, whether the air conditioning cools, whether the audio system operates normally, whether the wipers function correctly, and whether the windows roll up and down smoothly. After starting the engine, carefully observe whether the idle speed is stable, whether the steering wheel vibrates noticeably, whether the front and rear seats vibrate significantly, and whether there is any noticeable noise inside the car.
5
1
Share

Does a Faulty Three-Way Catalytic Converter Sensor Affect the Car?

A faulty three-way catalytic converter sensor does affect the car, with the following consequences: 1. Increased vehicle exhaust pollution; 2. Illumination of the engine warning light; 3. Inability of the engine to precisely control fuel injection, leading to increased fuel consumption and reduced power; 4. Significant carbon buildup inside the cylinders. The function of the three-way catalytic converter sensor is to convert harmful exhaust gases such as CO, HC, and NOx into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. The principle of the three-way catalytic converter sensor is to disrupt normal chemical reactions via redox reactions, promoting specific oxidation-reduction chemical processes.
13
0
Share

What is the appropriate tire pressure for Xiaomi balance scooters?

Xiaomi balance scooters' tire pressure should be maintained at 30-35psi. Functions: Prevent accidents, extend tire service life, and reduce wear on the suspension system. Handling tire pressure monitoring system faults: Display the tire pressure and temperature readings on the dashboard to check for any abnormalities. Inspect underinflated tires for air leaks. Verify if the tire pressure monitor is malfunctioning. Braking performance: Reduced tire friction and adhesion will negatively impact braking effectiveness. Ride comfort: Causes steering wheel vibration and deviation, decreasing driving comfort while also posing certain safety risks.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.