What is the fuel consumption of the Hongqi H5?

2 Answers
MacTanner
07/25/25 6:01am
Under normal circumstances, the fuel consumption is around 6.2-6.4L per 100 kilometers. Below is some introduction about this car: 1. Exterior: The Hongqi H5 is a new model under the Hongqi brand. This car basically follows the design of the Hongqi B-Concept concept car, featuring an inverted trapezoidal front grille connected to the headlights, with vertical chrome decorative strips embedded inside. 2. Powertrain: The Hongqi H5 is equipped with a 1.8T engine, with a rated power of 131kW and a torque of 250Nm, paired with a 6AT transmission. 3. Configuration: The Hongqi H5 adopts an independent floating central control screen, equipped with a three-spoke multifunctional steering wheel and an electronic parking brake.
Was this review help?
9
5
Share
DelGavin
08/10/25 6:01pm
I've been driving the Hongqi H5 for two years now, mainly for urban commuting. Initially, the fuel consumption was quite high, often around 9L in city traffic jams, and the lowest on highways was just over 6L. Paying attention to details helps save fuel, like maintaining tire pressure at 2.4bar—low pressure can increase consumption by 1L; using air conditioning adds another 1L. Compared to my friend's Honda Accord Hybrid, it's indeed more fuel-efficient, but the Hongqi offers stronger power and better acceleration. After the fuel price hike, I started focusing on fuel-saving techniques: avoid sudden acceleration, keep RPM below 2000; regularly clean the air filter—a dirty one can increase fuel consumption by 10%; and use ECO mode to limit throttle response. My actual combined fuel consumption is 8L/100km, with a monthly mileage of 1000km costing about 800 yuan in fuel. It feels much more economical than an SUV, and overall, I'm quite satisfied with the car's balance.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What is the actual fuel consumption of the Kia Forte?

Kia Forte's actual fuel consumption is 7-7.7 liters per 100 kilometers. Fuel consumption is related to engine displacement: The larger the engine displacement, the higher the fuel consumption. Fuel consumption is related to road conditions: When a car starts from a stationary state, it requires a significant acceleration, and the engine needs to output substantial power. If the car frequently starts from a stationary state, its fuel consumption will be relatively high. When driving in congested traffic, the engine spends some time in idle mode. During idle mode, the car's mileage does not increase, but the engine continues to consume fuel. Therefore, the fuel consumption per 100 kilometers will also increase. Fuel consumption is related to driving habits: Individual driving habits have a significant impact on fuel consumption. When driving, it is essential to maintain a steady speed as much as possible and avoid unnecessary overtaking. Only then will the car be most fuel-efficient.
3
0
Share

What is the situation when the gear position light of the Wrangler does not light up?

The gear position light of the Wrangler not lighting up requires checking whether the background light combination switch has a control short circuit or if there is an electronic fault with the gear position switch. More information about the Wrangler is as follows: 1. The Wrangler features a rugged and masculine body outline, wide front and rear wheel arches, a seven-slot grille at the front, round headlights, and a dual-top combination design, which includes both soft and hard tops. This maximizes the fun of open-top driving for the owner and is very convenient to operate. The soft top uses a unique three-layer canvas fiber, which can reflect road noise, absorb wind noise, prevent vibrations, and enhance the overall thermal insulation effect of the body. 2. The Wrangler's four-wheel-drive technology is the Rock-Trac part-time four-wheel-drive system. Part-time four-wheel drive means the driver manually connects or disconnects the transfer case to switch between two-wheel or four-wheel drive modes. This relatively pure system requires the driver to judge road conditions and select the drive mode based on their own experience.
15
1
Share

When did China 4 start?

The China 4 emission standard started in 2011 and was in effect until the China 5 standard was implemented in 2018. Therefore, vehicles produced between 2011 and 2017 were all under the China 4 standard. The China 4 standard requires the emission levels of various pollutants to be approximately 50% lower than those of the China 3 standard. The specific implementation times of the China 4 standard for different vehicle types are as follows: 1. The China 4 standard for diesel vehicles over 3.5 tons, originally scheduled to be implemented on January 1, 2010, was postponed by two years. This means that from January 1, 2012, diesel vehicles that did not meet the China 4 standard requirements could not be sold or registered; new compression-ignition engines that did not meet the China 4 standard requirements could not be sold or put into use. 2. For diesel vehicles under 3.5 tons, the implementation of the China 4 standard was postponed by three years, taking effect on July 1, 2013. 3. From January 1, 2011, gas-fueled spark-ignition engines and vehicles that did not meet the China 4 standard requirements could not be sold or registered.
18
1
Share

What are the methods for cleaning wheel hubs?

Wheel hub cleaning methods are as follows: 1. Toilet cleaner: Its main ingredient is hydrochloric acid, which has a strong corrosive effect. Therefore, it needs to be diluted before use. The corrosiveness is very effective in removing stubborn stains, but it can also damage the paint protective layer of the wheel hub. Therefore, the amount used should be controlled, and it should be rinsed thoroughly with clean water after use to avoid residue. 2. All-purpose cleaner: All-purpose cleaner is also a common household cleaning agent. Despite the same name, there are many different formulations for different stains, and even different brands have different formulations. However, one thing is certain: all-purpose cleaners are chemically synthesized reagents. Before purchasing, be sure to explain your purpose to the seller. If the all-purpose cleaner's formulation is not suitable, it may have poor cleaning ability or even corrode the wheel hub. 3. Iron remover: Iron remover can be said to be the most effective and easiest to use among all the cleaning products mentioned above. Since many of the stains splashed onto the wheel hub contain iron powder, the iron remover can dissolve them well. After spraying the remover for a few minutes, rinse it off with clean water, and the wheel hub will look as good as new.
14
2
Share

How to Use the Start-Stop System?

The usage method of the start-stop system is as follows: 1. Turn off the start-stop system during traffic jams: Repeated start-stop not only increases fuel consumption but also adds burden to the engine. In such cases, the engine start-stop system should be turned off immediately. 2. Turn off the start-stop system when going up or down slopes: When the engine starts or stops on a slope, the vehicle may roll when the brake is released, increasing the risk. Therefore, this function should be turned off on slopes. 3. Turn off the start-stop system when using air conditioning for cooling: When the engine stops, the air conditioning also stops cooling to protect the battery. The engine will restart quickly, leading to repeated start-stop cycles. 4. Turn off the start-stop system when wading through water: When a vehicle is wading, the speed is relatively low. If the brake is pressed, the automatic start-stop system will engage, causing the engine to stop. This creates negative pressure in the exhaust pipe, which may lead to water entering the exhaust. 5. Turn off the start-stop system during low-speed parking: The start-stop technology does not activate when the vehicle is in reverse. However, during repeated maneuvering in and out of parking spaces, especially when reversing into a parking spot, the engine may stop while adjusting the distance. Each adjustment could trigger the start-stop system, potentially damaging the vehicle.
19
4
Share

How to Adjust the Headlight Height of the Odyssey?

Odyssey headlight adjustment switch lever is located on the left side of the steering wheel back. The light adjustment lever can control the low beam, high beam, turn signal, width indicator light, and fog light of the headlights. The following is the Odyssey headlight adjustment method: 1. The Odyssey headlights are located at the lower edge of the front engine hood, with a long projection distance. 2. Enter the driver's compartment to see the headlight adjustment lever on the left back of the steering wheel. 3. The default state during the day is to turn off the headlights, that is, adjust the gear to the "OFF" position. 4. The AUTO gear is the automatic light adjustment gear, which can automatically adjust the headlights according to the light. 5. The next gear is the width indicator light gear, which is mainly used to let others see you. 6. The bottom one is the high beam gear switch, and the high beam should be used reasonably. Precautions for using car lights: 1. It is recommended to turn on the front and rear fog lights when driving in foggy or rainy days. 2. Use lights reasonably for lighting when driving at night.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.