What is the fuel consumption of the Highlander 2.0T?

2 Answers
LaMichael
07/28/25 8:22pm
The fuel consumption of the Highlander 2.0T is 9.6L/km. Below is a related introduction to the Toyota Highlander: Powertrain: It is equipped with a 3.5L V6 engine that delivers up to 201 kW of power, paired with a stepped 5-speed automatic transmission with manual mode, providing smooth acceleration, excellent fuel economy, and a delightful driving experience. Interior: The Highlander's interior features a simple and elegant design with numerous buttons on the center console, but they are well-arranged for easy operation. The craftsmanship is meticulous, with even seams, and the color scheme exudes a noble and elegant feel. It comes with rich configurations, making the interior highly practical overall.
Was this review help?
5
4
Share
MacGeorge
08/12/25 1:11am
The fuel consumption issue of the Highlander 2.0T is something I often discuss in car circles. This SUV is equipped with a 2.0T turbocharged engine, with a combined fuel consumption of approximately 8.5 liters per 100 kilometers. According to official data and real-world tests, in congested urban areas, it can rise to 10 liters or more, as the heavy body and frequent starts consume a lot of fuel. However, it's quite economical on highways, around 7 liters, thanks to the efficient operation of the turbocharger at steady speeds. From my own observations, many factors affect fuel consumption, such as driving habits—rapid acceleration and hard braking can cause the fuel gauge to spike, while gentle driving saves fuel. Cold starts in winter and using the air conditioning can also increase consumption by 1 to 2 liters. Maintaining the vehicle, such as keeping tire pressure normal and regularly cleaning the air intake and air filter, can effectively control fuel consumption. Overall, for a midsize SUV, the Highlander is relatively fuel-efficient and suitable for family road trips. I recommend conducting more real-world tests and using fuel consumption apps to track usage.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

Why Can't the Car Key Unlock When the Red Light Flashes?

The reason why the car key cannot unlock when the red light flashes is due to low battery in the key remote or a dead car battery. The detailed explanations are as follows: 1. Low battery in the key remote: When the battery is insufficient, the small red light on the key can still be on, but its brightness is dim compared to a fully charged battery. The battery's remaining power can only support the small red signal light to emit a faint glow but is insufficient to transmit the unlock signal. 2. Dead car battery: If the car battery is dead, the entire vehicle loses power. 3. Data loss: The small red light on the remote may still be on, but if the internal data is lost, the signal will also be absent.
10
4
Share

What Causes the Abnormal Noise When Accelerating the Xingrui?

The reasons for abnormal noise when accelerating the Xingrui are as follows: Abnormal noise from the fuel pump motor: When there is wear or impurities inside the fuel pump motor, it can produce abnormal noise as the driver accelerates. This issue requires replacing the fuel pump. Abnormal noise from the throttle: Modern throttles are electronic, and the motor controls the opening and closing of the throttle valve. When the motor gears are worn, insufficient engagement can cause abnormal noise. Excessive carbon deposits or sludge in the throttle can also lead to noise. The throttle can be cleaned, but if the motor is damaged, the throttle needs to be disassembled to replace the servo motor. Abnormal noise due to poor lubrication of the accelerator pedal bearing: You can apply grease to the bearing for lubrication.
18
1
Share

How Many Meters Should the Warning Sign Be Placed Behind the Car on the Highway?

On the highway, the warning sign for a vehicle breakdown should be placed at least 150 meters away from the direction of oncoming traffic. Here are some precautions for driving on the highway: 1. Pre-drive vehicle inspection: Before driving, the driver should conduct a comprehensive check of the vehicle, with particular attention to various fluids, tires, and the braking system. If fluids are low, they should be replenished to the appropriate level; tires should be carefully inspected, and any debris in the tread should be removed. 2. Adjust the rearview mirrors: When the rearview mirrors are in the optimal position, they allow the driver to better observe the sides and rear of the vehicle. Note that the adjustment methods for the left and right rearview mirrors are slightly different.
4
3
Share

What are the reasons for the Mercedes-Benz car radio not responding?

Mercedes-Benz car radio not responding reasons are as follows: Poor contact: Due to poor contact of some buttons or spring fatigue causing short circuit, for metal spring failure repair, you can first gently scrape off the rusted part with a blade, then clean it with anhydrous alcohol. Install signal amplifier: For some aftermarket car radios, most are not equipped with signal amplifiers. So, when encountering the situation where the car radio suddenly stops working, you might consider installing a signal amplifier. Replace radio head: Whether it's an aftermarket or original car radio, when used for a certain period, the signal reception will definitely decline. Even after installing a signal amplifier, the effect may not be obvious, then you need to check if there is any abnormality with the antenna.
3
1
Share

What are the reasons for the frequent stalling of Chery e5?

The reasons for the frequent stalling of Chery e5 are as follows: Electrical circuit failure: Stalling due to low-voltage power interruption during driving. You can check the ignition and starter switches, as well as the fuse box. Low-voltage circuit short circuit: Stalling caused by a short circuit in the low-voltage circuit. In this case, the stalling is intermittent; check the low-voltage circuit. Component failure: Stalling due to faults in the ignition coil, capacitor, or electronic ignition module. The symptom is that the car can start initially, but stalls after a while, then can start again, and stalls once more. Fuel system failure: Stalling caused by a damaged fuel pump, ruptured fuel pipe, clogged carburetor inlet, or an empty fuel tank. However, in this case, the car can be restarted.
4
5
Share

What are the reasons for the constant overheating of Changhe Furuida?

The reasons for the constant overheating of Changhe Furuida include insufficient coolant and a malfunctioning thermostat. The specific reasons are as follows: Insufficient coolant: The lack of coolant in the engine cooling system may be due to leaks in the engine, such as water pump leaks, damaged pipes, or a damaged radiator. Malfunctioning thermostat: A faulty thermostat in the engine cooling system can cause the water temperature to rise too high. Because the thermostat cannot open, the flow of coolant inside the engine is obstructed, leading to excessively high coolant temperature. Fan malfunction: If the cooling fan in the engine cooling system is not working properly, the heat dissipation of the coolant will be poor. This causes the water temperature warning light to come on, resulting in excessively high coolant temperature.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.