What is the fuel consumption of the Heyue RS?

How to Disable the Anti-lock Braking System?

Method to disable the anti-lock braking system: The ABS (Anti-lock Braking System) cannot be disabled as it is in a default active state. Unless there is a malfunction, the system remains on standby at all times. Whenever there is a tendency for the wheels to lock, the ABS system intervenes to prevent wheel lock-up. The primary function of the ABS system is to prevent the wheels from locking and losing directional control, rather than to shorten the braking distance. In some braking situations where the vehicle cannot come to a complete stop before colliding with an obstacle, the ABS ensures that the driver retains the ability to steer, allowing them to maneuver around the obstacle during braking to avoid an accident.

2

4

Share

Where is the VIN code?

VIN code is usually located on the adhesive label or nameplate inside the driver's side door. More information about VIN is as follows: 1. VIN is the abbreviation for Vehicle Identification Number. 2. According to SAE standard (Society of Automotive Engineers), the VIN code consists of 17 characters, hence commonly known as the seventeen-digit code. 3. The VIN contains information such as the vehicle manufacturer, year, model, body type and code, engine code, and assembly location. Correct interpretation of the VIN code enables accurate diagnosis and maintenance.

9

3

Share

How to Determine the National Emission Standard of a Vehicle?

Here are the methods to determine the national emission standard of a vehicle: 1. Check the vehicle's environmental protection label, which usually has clear markings on the back. 2. Visit the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center to inquire. 3. Take the vehicle registration certificate (original or copy) to the vehicle management office for inquiry. 4. For new cars, you can refer to the vehicle's factory certificate, which contains this information. However, the vehicle certificate is usually kept at the vehicle management office, so it's advisable to make a copy when purchasing a new car. 5. Make a rough estimation based on the year the vehicle was registered.

14

5

Share

Can a vehicle undergo annual inspection in another location?

Vehicles can undergo annual inspection in another location. Currently, the traffic management authorities have fully implemented cross-province inspection services for small cars, trucks, and medium-sized buses. Applicants can directly have their vehicles inspected in provinces other than where the vehicle is registered and obtain the inspection qualification mark without needing to go through the entrustment inspection procedure. However, large passenger buses and school buses cannot be inspected in another location and must return to the vehicle's registration location for inspection. The annual inspection process includes: Checking whether the engine, chassis, body, and auxiliary equipment are clean, complete, and functional, whether the paint surface is uniform and aesthetically pleasing, whether the main assemblies have been replaced, and whether they match the initial inspection records; verifying whether the vehicle's braking performance, steering control, lights, exhaust, and other safety features comply with the "Technical Conditions for Safe Operation of Motor Vehicles"; Inspecting whether the vehicle has been modified, reconstructed, or altered, whether the driving license, license plate, and vehicle records match the actual condition of the vehicle, and whether any changes have been made, and whether approval and modification procedures have been completed; Checking whether the license plate, driving license, and enlarged license plate characters printed on the vehicle are damaged, altered, or illegible, and whether they need to be replaced; For large vehicles, verifying whether the unit name or the name of the street, township, or town where the vehicle is located and the maximum seating capacity in the driver's compartment are printed in Chinese imitation Song font on both sides of the door as required; For trucks, checking whether the rear tailgate (including the trailer's rear tailgate) has the vehicle number printed in 2~3 times enlarged size as required, and whether the words "individual" are printed on both sides of the door for individual or joint-operation vehicles. The characters must be clear, and unit codes or other patterns are not allowed (special circumstances require approval from the vehicle management office).

5

0

Share

How to reset the maintenance wrench on the old Chery e5?

The method to reset the maintenance wrench on the old Chery e5 is as follows: 1. Make sure the car is turned off, locate the menu toggle button on the steering wheel, insert the key, and hold down the toggle button without releasing it. 2. Turn the key to the second position, which is the ON position, to power on the car and start the self-check. 3. Wait for the self-check to complete, while still holding down the toggle button. After five seconds, the maintenance will be reset. More information about the Chery e5 is as follows: 1. The front face design of the Chery e5 features a more rounded clam-shell structure for the engine hood. 2. The newly designed headlights of the Chery e5 incorporate some popular fashion elements, with a sharp, angular quadrilateral shape.

17

3

Share

How to Activate the Lock Sound on Volkswagen Tiguan?

It cannot be set by yourself and needs to be activated by flashing the ECU. You can visit a 4S store to have it done. Below is relevant information: 1. Lock sound prompt function In the factory settings of Volkswagen models, the horn does not sound by default when the doors are locked. The lock sound requires flashing the data (OBD vehicle system, modifying settings). After enabling this function, when you hear the horn sound upon locking, you don’t need to worry about the doors not being locked. 2. ECU flashing, currently also known as ECU upgrade, car computer upgrade, or ECU modification in China. The formal translation is actually ECU tuning. How ECU flashing works: It involves rewriting the program to finely adjust the fuel supply and ignition timing based on the original factory data or to unlock hidden functions set by the factory. By optimizing parameter settings, it aims to increase horsepower, enhance torque, or reduce fuel consumption. Increasing horsepower and torque will correspondingly increase fuel consumption, while decreasing horsepower and torque will reduce fuel consumption.

8

0

Share

What is the fuel consumption of the Heyue RS?

How to Disable the Anti-lock Braking System?

Where is the VIN code?

How to Determine the National Emission Standard of a Vehicle?

Can a vehicle undergo annual inspection in another location?

How to reset the maintenance wrench on the old Chery e5?

How to Activate the Lock Sound on Volkswagen Tiguan?

What is an airbag device?

What are the symptoms of a clogged expansion valve?

Can engine oils of different brands be mixed?

How to Prevent Rain on Car Rearview Mirrors?