What is the fuel consumption of the Haval H9 diesel version?

1 Answers
MacKayden
07/29/25 6:47pm
Haval H9 diesel version has a fuel consumption of around 8 liters per 100 kilometers, which is not considered high. Factors affecting fuel consumption: Long idling time: Some may think that idling doesn't consume much fuel because the engine speed is low during idling. In terms of gasoline consumption per unit time, idling indeed doesn't consume much fuel. However, during idling, the vehicle is stationary, and the burned gasoline doesn't serve any practical purpose. It's simply wasted. Therefore, if the vehicle is parked for an extended period, it's better to turn off the engine rather than keeping it idling. Frequent lane changes: Practice has shown that driving straight at a constant speed is the most fuel-efficient, especially when maintaining an economic speed of 80-90 kilometers per hour.
Was this review help?
14
1
Share
More Forum Discussions

What do MT and CVT mean in cars?

MT stands for manual transmission, and CVT stands for continuously variable transmission, a type of automatic transmission. 1. Meaning of MT: Manual transmission, also known as mechanical transmission, requires the driver to manually shift the gear lever (commonly referred to as the "gear stick") to change the gear engagement inside the transmission, altering the gear ratio to achieve speed variation. Most passenger car manual transmissions are six-speed or five-speed gear transmissions with synchronizers, making shifting convenient and reducing noise. When operating a manual transmission, the clutch must be depressed to shift the gear lever. 2. Meaning of CVT: The CVT eliminates the complex and bulky gear combination for speed variation, using only two sets of pulleys for transmission. It changes speed by altering the contact radius of the drive belt between the driving and driven pulleys. Since CVT can achieve continuous changes in gear ratio, it provides the best match between the transmission system and engine conditions. Unlike traditional transmissions with gear structures, CVT uses two adjustable-diameter pulleys connected by a belt. The basic principle involves wrapping the belt around two conical pulleys, with the pulley diameter adjusted via hydraulic pressure for continuous variation. At startup, the driving pulley has the smallest diameter, while the driven pulley has the largest, achieving a high gear ratio. As speed increases and sensor signals change, the computer control system adjusts the hydraulic pressure to continuously vary the pulley diameters, enabling seamless speed variation throughout the driving process.
6
1
Share

Where is the sunroof switch for the Volkswagen Sagitar located?

The sunroof switch for the Volkswagen Sagitar is located on the front overhead reading light panel. Here are some details about the Sagitar's sunroof: 1. The sunroof measures 80cm in length and 70cm in width, with a daylight opening area of 0.56 square meters, offering two options: tilt or fully open; 2. With the vehicle started, move the switch to the tilt position and press it to control the sunroof's opening/closing state; 3. With the vehicle started, move the switch to the fully open position and press it to automatically operate the sunroof to its final position. Press the switch again to stop the automatic opening/closing function.
15
5
Share

Is Lynk & Co a subsidiary of Geely?

Lynk & Co is a company under Geely Holding. Lynk & Co is a joint venture established by Geely Holding Group, Geely Auto Group, and Volvo Cars. It is a premium automotive brand that combines European technology, European design, global manufacturing, and global sales. Guided by the 'Five Highs' product development philosophy, Lynk & Co aims to create a globally competitive premium brand. The 'Five Highs' are: 1. High Aesthetics: Based on four core elements—self, respect, subversion, and depth—the brand's urban contrast aesthetic design philosophy has matured, creating a family-style product identity that gives Lynk & Co products a unique and premium aesthetic. 2. High Performance: Shared Drive-E powertrain technology with Volvo, combined with advanced transmission, drivetrain, and braking systems from top global suppliers, ensures robust performance. 3. High Technology: The CMA (Compact Modular Architecture) platform provides Lynk & Co with strong technological leadership. 4. High Safety: Lynk & Co's unique 'Comprehensive Safety Concept' covers five aspects—active safety, passive safety, pedestrian safety, environmental safety, and property safety—to provide all-round protection. 5. High Value: Sharing the same high-standard supplier management and world-class suppliers as Volvo Cars, along with comprehensive ownership and usage services, delivers an unparalleled sense of value to users.
16
2
Share

Is Tire Bulging Covered Under the Three Guarantees Policy?

Tire bulging and its coverage under the Three Guarantees Policy: 1. Most new car tires come with a one-year warranty. If bulging or other issues occur during the warranty period and are confirmed by national authoritative departments to be caused by manufacturing defects, such cases are covered under the Three Guarantees Policy. The manufacturer will provide compensation or replacement according to the policy. 2. If the bulging is due to the car owner's own actions, it is not covered, and the 4S store cannot provide a free replacement. 3. Regardless of whether it's due to scratches or quality issues, when tire bulging is detected, consumers should immediately take the vehicle to a 4S store for inspection. If unsatisfied with the inspection results, they can request the 4S store to send the tire to the manufacturer for further evaluation to obtain an official report identifying the cause of bulging. Alternatively, consumers can opt for specialized inspection agencies or send the tire back to the manufacturer or a quality inspection institute for examination. 4. It's crucial to note that a bulging tire should not be used further, as it significantly increases the risk of a blowout, especially during high-speed driving. Tire bulging occurs when the internal cord layers are damaged, as these layers form the tire's structural skeleton. When cords break, only the elastic rubber remains to support the tire, leading to bulging at the damaged areas under pressure.
18
4
Share

U-turn or Turn Around for Cars?

Both "U-turn" and "turn around" refer to a car reversing direction. More specifically, "U-turn" means vehicles or ships turning to the opposite direction, while "turn around" means reversing direction, and both can be used in traffic contexts. Below are specific techniques for making a U-turn: Priority on Steering Correction: During a U-turn, "steering correction" plays a crucial role in changing the car's direction and position. Therefore, beginners should always remember to "correct the steering first, then stop" before each halt. Avoid Forcing the Steering Wheel: When making a U-turn, never force the steering wheel (turn it to the limit) before starting or after stopping, as this can damage steering components, increase free play in the steering wheel, and cause unnecessary tire wear. Before each stop, the distance between the left and right wheels and the roadside will differ. Thus, when judging the stopping distance, use the wheel closest to the roadside as a reference. In areas with obstacles or buildings, also pay attention to the front and rear bumpers and the vehicle's height. Using Half-Clutch Technique: On roads with a side slope, you can use the terrain and the "half-clutch" technique to rock back and forth for a U-turn without frequent gear shifts. Note that the "half-clutch" should not be used for extended periods, especially not as a substitute for braking. In hazardous areas like cliffs, deep ditches, or obstacles, always point the car's front toward the danger for better visibility. Additionally, after stopping with the front facing danger, be extra careful not to engage the wrong gear when restarting. On slopes, strictly follow the hill-start procedure.
19
3
Share

How to Operate the Cruise Control in Passat?

The operation method of Passat cruise control is as follows: 1. The cruise control buttons are located on the left side of the steering wheel; 2. Press the cruise icon button, at this time the cruise icon on the dashboard lights up, and the cruise control is in standby mode; 3. After accelerating the vehicle to the desired speed (the speed must be ≥40 km/h), press the SET button to activate cruise control, release the accelerator, and the vehicle will continue to drive at the current speed; 4. Use the "—" and "+" buttons to decrease or increase the speed; 5. Lightly press the brake to pause cruise control, and press the RES button to resume cruise control; 6. Press the middle button to adjust the following distance, with five levels to choose from.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.