What is the fuel consumption of the Haval H6 Guochao Edition 1.5T?

1 Answers
VanLily
07/29/25 8:53am
Haval H6 Guochao Edition 1.5T has a comprehensive fuel consumption of 6.6-6.9L/100km. Currently, there are 5 models of Haval H6 Guochao Edition 1.5T on sale. The automatic luxury version, automatic super luxury version, and automatic champion version have a comprehensive fuel consumption of 6.6L/100km. The automatic urban version and automatic champion version have a comprehensive fuel consumption of 6.9L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.0-13.0L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine is an important cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it means there are more carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits in the engine. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker exhaust gas during driving. At this time, the oxygen sensor should be replaced. Regularly replace the three filters: During the use of the vehicle, the oil filter, air filter, and fuel filter must be replaced regularly. If they are not replaced for a long time, they will become dirty and send wrong information to the engine control unit, causing incomplete fuel combustion and increased carbon deposits in the engine. Check the electronic control unit: Although the reliability of the engine's electronic control unit is very high, in cars that have been used for a long time, various faults are inevitable.
Was this review help?
13
5
Share
More Forum Discussions

What Causes a Car Navigation Screen to Go Black?

The reasons for a car navigation screen going black are: 1. The navigation device has no power; 2. The navigation device's software is not genuine; 3. The original device does not support the new software after an upgrade; 4. Loose or disconnected wiring at the navigation device's port; 5. Malfunction of the navigation device; 6. Damaged circuit board; 7. Damaged navigation display. The solutions for a black car navigation screen are: 1. Check if there is power; 2. Inspect the navigation device's software; 3. Determine if it's caused by an upgrade; 4. Check if the connections are normal; 5. Try pressing the reset button; 6. Inspect if the circuit board and display are damaged.
5
4
Share

What is the method for removing car window film?

There are two methods for removing car window film: 1. Tear open a corner on the window and slowly peel it off; 2. Use adhesive remover, a scraper, and a cloth to clean off any residual adhesive. The functions of car window film include: 1. Heat insulation and sun protection; 2. UV protection; 3. Safety and explosion prevention; 4. Creating a private space; 5. Reducing air conditioning energy consumption; 6. Enhancing aesthetics. The steps for applying car window film are: 1. Lay two large bath towels on the front hood and dashboard; 2. Cover the seats with seat covers and wrap them tightly with plastic wrap; 3. Thoroughly clean each piece of glass; 4. Spray a small amount of window film installation solution on the outer surface of the window glass; 5. Cover it with a soft template; 6. Cut the window film according to the template.
17
5
Share

What is the function of the P gear in an automatic transmission car?

The function of the P gear in an automatic transmission car is to lock the vehicle's braking device, preventing the vehicle from moving. The method to start an automatic transmission car is as follows: 1. Start the car with the gear in N or P position; 2. After starting the engine, wait a few seconds before shifting gears to allow the transmission to be fully lubricated. Press the brake pedal, shift to the correct gear, release the brake pedal, and the car will start normally; 3. When driving on the road, place the gear shift lever in the D position and gradually increase the throttle; 4. When driving on short and small slopes, place the lever in D or L position and control the throttle to complete the uphill; 5. When driving downhill, use the D gear in combination with the brake to control the vehicle; 6. When driving on snow, place the lever in L position, start with L gear to prevent the drive wheels from slipping, and then shift to D gear after the car starts moving.
9
5
Share

How to Adjust the Rearview Mirrors of a Citroën Sedan?

Adjusting the rearview mirrors of a Citroën sedan depends on different situations: 1. Adjusting the left rearview mirror: For up and down positions, place the distant horizon in the center; for left and right positions, adjust until the car body occupies one-fourth of the mirror's surface. 2. Adjusting the right rearview mirror: Position the horizon at two-thirds of the mirror's height, then adjust the car's edge to occupy one-fourth of the mirror's image. 3. Adjusting the interior rearview mirror: Ensure you can see through the rear window, with the upper and lower spaces adjusted so that the sky and ground each occupy about half of the view. Taking the 2020 Citroën C6 as an example, it is a mid-sized 4-door, 5-seater sedan with body dimensions of length 4980mm, width 1858mm, height 1475mm, and a wheelbase of 2900mm.
3
4
Share

What Causes Heavy Steering Wheel in Cars?

Car steering wheel heaviness can be caused by: 1. Insufficient tire pressure; 2. Replacement with different tire models; 3. Damaged or poorly sealed dust boots; 4. Dirty, insufficient, or air-contaminated power steering fluid; 5. Uncalibrated torque sensor; 6. Deformed front wheel suspension or abnormal wheel alignment; 7. Stuck steering column. The steering wheel is connected to the steering shaft via splines, converting the driver's force applied to the wheel's edge into torque transmitted to the steering shaft. Methods to lighten car steering: 1. Start the engine and engage gear, wait 3 seconds; 2. Turn steering wheel fully left/right, wait 3 seconds, then return to center and turn off engine.
2
4
Share

Is the Outlander domestically produced?

Outlander is domestically produced. The Outlander is a compact 5-door, 5-seat SUV with body dimensions of 4705mm in length, 1810mm in width, and 1710mm in height, a wheelbase of 2670mm, a fuel tank capacity of 63 liters, and tire specifications of 225/55R18. The Outlander is equipped with a 2.0L naturally aspirated engine and a CVT continuously variable transmission, delivering a maximum power of 122 kW at 6000 rpm and a maximum torque of 201 Nm at 4200 rpm. It features front-wheel drive, with MacPherson independent suspension at the front and multi-link independent suspension at the rear.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.