What is the fuel consumption of the Haval H6 Guochao?

1 Answers
MacIan
07/30/25 12:16am
The comprehensive fuel consumption of the Haval H6 Guochao is 6.6-7.1L/100km. Currently, there are 7 models of the Haval H6 Guochao on sale. The automatic luxury version, automatic super luxury version, and automatic champion version have a comprehensive fuel consumption of 6.6L/100km. The automatic urban version and automatic champion version have a comprehensive fuel consumption of 6.9L/100km. The automatic GT version and automatic champion version have a comprehensive fuel consumption of 7.1L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.0-13.0L/100km. The specific factors affecting car fuel consumption are as follows: Car weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while an SUV with a weight of about 1.5 tons has a fuel consumption of about 8.5 liters. Different weights lead to different fuel consumption levels. Drag coefficient: Higher drag coefficients increase fuel consumption during driving. Cars with better aerodynamics have lower drag coefficients, resulting in lower fuel consumption. Economical RPM: During driving, the engine has an optimal torque output point where fuel consumption is minimized. Generally, small-displacement cars reach this point at around 70 km/h, while larger-displacement cars achieve it at about 100 km/h. Maintaining speed within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, can increase fuel consumption.
Was this review help?
14
1
Share
More Forum Discussions

What does fuel station card loading mean?

Card loading refers to the process where fuel card holders transfer funds from their bank accounts to their fuel cards, which can then be directly used for refueling at gas stations. This eliminates the hassle of carrying cash and dealing with change. Below is additional information: 1. Benefits of card loading: At the time, gas station systems were outdated, and real-time communication couldn't be achieved promptly. The introduction of card loading allowed direct deductions from the fuel card without needing server data retrieval. The fuel card's data is stored in its IC chip, and any changes are recorded in the database. 2. Explanation of card loading: Card loading transforms the traditional method of withdrawing cash from a bank account for payments into directly loading (depositing) funds from the bank account onto the IC chip, effectively creating an electronic wallet. This reduces risks associated with carrying cash, such as losing change, counterfeit money, or theft.
19
4
Share

Does the Trunk Provide Heat Insulation in Summer?

Generally, car trunks do not have heat insulation effects in summer. However, compared to the passenger compartment, the trunk temperature is relatively lower during summer. This is because trunks have better sealing, superior heat insulation, and lower heat conductivity. Typically, the interior cabin temperature tends to be higher regardless of summer or winter, as the cabin forms a closed system while the outside is a flowing environment - closed systems retain heat more effectively. Here are some supplementary methods for car heat insulation: 1. Apply window tint film: High-quality automotive films can effectively block sunlight and UV radiation. To better shield against direct sunlight while driving, opt for genuine UV-resistant window films. 2. Install sunshades: Window sunshades can block most sunlight, with thicker shades providing better sun-blocking performance. 3. Implement pre-cooling measures: Taking preventive actions to cool the vehicle can prevent excessive interior temperatures. Park in shaded, well-ventilated areas whenever possible.
18
5
Share

Why is the tire pressure monitoring warning light on?

The illumination of the tire pressure warning light indicates that the current pressure deviation among the four tires is too large or that there is insufficient air, suggesting an issue with the vehicle's tire pressure. It is recommended to visit a professional 4S shop for inspection. Below are the reasons why the tire pressure monitoring light may be on: 1. The tire pressure monitoring light may be on due to a punctured tire. This situation usually involves very slow air leakage, making it difficult to immediately identify which tire is affected. In such cases, a tire pressure gauge can be used for measurement. 2. Sometimes, the tire pressure monitoring light is on because the tire pressure is too high. Standard tires: 2.4-2.5 bar; reinforced tires: 2.8-2.9 bar; maximum pressure: should not exceed 3.5 bar. Therefore, if any tire exceeds 3.0 bar, it may trigger the tire pressure monitoring light. 3. The tire pressure monitoring light may be on due to prolonged driving with low tire pressure. If a tire's pressure is too low, high-speed operation can cause the tire temperature to rise, leading to increased tire pressure. In such cases, it is advisable to stop and rest or replace the tire with a spare. 4. The tire pressure monitoring light may be on due to prolonged lack of inflation, resulting in low tire pressure.
7
0
Share

What is the fuel tank capacity of the 2017 Sagitar?

2017 Sagitar has a fuel tank capacity of 53 liters, which is the officially announced data. The 2017 Sagitar requires 95-octane gasoline, with a fuel consumption of 5.5 to 6.8L per 100 kilometers. A full tank can cover a distance of 779 to 963 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. Generally, the fuel level is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are 2 segments remaining to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is the volume from the bottom of the tank to the safety limit. There is still some space from the safety limit to the tank opening, which is reserved to allow the fuel to expand when the temperature rises without overflowing the tank. If the fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked tank capacity.
2
0
Share

What level of car is the A6?

The A6 belongs to the C-segment, which refers to mid-to-large-sized cars. Taking the 2021 A6 as an example, its body dimensions are: length 5038mm, width 1886mm, height 1475mm, with a wheelbase of 3024mm, a fuel tank capacity of 73 liters, and a curb weight of 1800kg. The 2021 A6 features a five-link independent front suspension and a five-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, a maximum power of 140kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
1
5
Share

How to Start a Mercedes-Benz C200L?

First, press the brake pedal located below the steering wheel, then press the one-touch start button to ignite the Mercedes-Benz C200L engine. Below are the specific functions of each button in the Mercedes-Benz C200L: 1. Electronic Stability Program (ESP). It is enabled by default and generally not recommended for manual deactivation by the owner. This system effectively prevents vehicle loss of control during extreme driving conditions. 2. Parking Radar/Image. The central display screen shows the rearview image, and the radar alerts with a warning sound when detecting nearby obstacles. 3. Internal/External Air Circulation. The difference between internal and external circulation is that internal circulation continuously supplies air from inside the vehicle, while external circulation allows outside air to enter and replace the existing interior air. Use internal circulation as a priority during traffic jams, in tunnels, or when outside air quality does not meet standards. On highways, switch to external circulation approximately every hour to refresh the air inside and outside the vehicle to prevent oxygen deprivation. 4. Temperature Zone Synchronization. When the temperature zone synchronization function is enabled, adjusting the driver's seat temperature will cause the other zones to follow suit. Additionally, when this function is disabled, each zone can be adjusted individually for temperature, offering more personalized comfort. 5. Auto Hold. Pressing the accelerator pedal triggers the unlocking of the wheels, allowing the vehicle to continue moving. 6. Auto Start-Stop. Once activated, the engine will temporarily shut off. Releasing the brake pedal will restart the engine to propel the vehicle forward.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.