What is the fuel consumption of the Haval H6 1.5T?

2 Answers
CharlotteRose
07/24/25 5:02am
The fuel consumption of the Haval H6's new engine 1.5T+7DCT is 9.64L/100km, while the old engine 1.5T+7DCT has a fuel consumption of 9.48L/100km. Here are the detailed introductions about the Haval H6: 1. Overview: The Haval H6 is the flagship model of the Haval brand, launched on August 25, 2011, at the Great Wall Motors Tianjin new factory. It is a compact SUV with a fuel consumption of 6.6-7.3L and a displacement of 1.5T/2.0T. 2. Configuration: Equipped with a 1.5-GDIT-EVO engine, the maximum torque output range is 1400-3600rpm, matched with the second-generation 7DCT transmission, with a comprehensive transmission efficiency of up to 95.6%. It comes standard with a 71.61% high-strength steel body, a hot-formed steel integrated door frame, and 6 airbags.
Was this review help?
6
3
Share
MilaMarie
08/11/25 12:42am
As an owner of the Haval H6 1.5T, I've been driving this car for almost two years. During rush hour traffic in the city, the fuel consumption is generally around 10-11 liters, while on the highway it can drop to about 7 liters. The overall combined fuel consumption fluctuates around 8.5 liters, which is within a reasonable range. Actual fuel consumption is highly related to driving habits—for example, aggressive acceleration and braking will consume more fuel. Additionally, tire pressure should be maintained at around 2.5, avoid carrying too much luggage, and use the air conditioning appropriately. In summer, using the AC increases fuel consumption by about 0.5 liters. However, most SUVs in the same class are similar, given their heavier body and larger space. For daily family use, it's completely acceptable, so there's no need to worry too much.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

What Causes the Parking Brake Warning Light to Illuminate?

The parking brake warning light may illuminate due to the following reasons: 1. The handbrake is not released or not fully released; 2. Low brake fluid level; 3. ABS function failure; 4. Severely worn brake pads; 5. Non-compliant brake fluid; 6. Poor contact in the parking brake switch wiring harness. Below is additional information: 1. The braking system mainly consists of several components including the energy supply device, control device, transmission device, and brake. 2. The primary functions of the braking system are to decelerate or even stop a moving vehicle, maintain a stable speed for a vehicle going downhill, and keep a stationary vehicle from moving.
4
0
Share

How to Turn Off the Ambient Light?

The method to turn off the car's ambient light is as follows: the first button on the left side of the steering wheel, when pushed downward, can adjust the light to its dimmest setting. Ambient lighting in cars has now become a key selling point for many vehicle models and is favored by numerous consumers. Relevant information about car ambient lighting is as follows: 1. Definition of Ambient Light: Car ambient lighting is essentially an interior light used to enhance the atmosphere inside the vehicle. It allows users to set the color, brightness, temperature, and direction of the light as needed, making the interior more vibrant at night, enhancing the mood, and creating a specific ambiance. 2. Function: Typically, car ambient lights are mainly red, blue, green, etc., similar to common decorative lights, and the colors can be freely chosen. However, it is important to note that the color of the ambient light should not interfere with normal safe driving. After all, its primary purpose is to enhance the atmosphere, soothe the driver's mood, and alleviate fatigue.
18
4
Share

What does the dAppen car sticker mean?

Dappen is a car sticker for modified cars without any special meaning. It is merely a label and symbol for modified vehicles, serving as a trendy and personalized decoration for the car body. Below is some related information about car modifications: 1. Modification Projects: Car modifications include engine modifications, chassis modifications, electrical equipment modifications, body modifications, interior modifications, and entertainment and information system modifications. 2. Engine Modifications: For engine modifications, such as intake system, exhaust system, fuel supply system, crankshaft and connecting rod mechanism, valve train, compression ratio, and turbocharging system. In the intake system modification, try to avoid large bends in the intake pipe, use heat insulation materials to separate the engine compartment and the air filter (commonly referred to as the 'mushroom head'). It is important to note that cars with more thorough modifications may require a larger throttle body.
17
0
Share

How many liters of transmission oil does an Aisin 6AT require?

The amount of oil used varies depending on the oil change method. During maintenance, there are two modes to choose from: 1. Approximately 10 liters can be replaced with a flushing machine oil change. The effect of flushing oil change is better, as it can remove impurities at the bottom and make the machine interior cleaner. 2. Gravity oil change requires about 4-6 liters. This method is similar to changing the vehicle's engine oil. Below are some additional tips: 1. It is recommended to change the transmission oil once every 60,000 kilometers. 2. If the vehicle is used frequently, the transmission oil should be changed at around 40,000 kilometers. 3. When changing the transmission oil, it is important to use the specific oil designed for the vehicle to ensure normal operation and extend the transmission's lifespan.
10
3
Share

What are the disadvantages of using a circulation machine to change transmission fluid?

The drawback of using a circulation machine to change transmission fluid lies in the increased usage of transmission fluid, leading to higher costs. Below is a related introduction: 1. Traditional manual transmission fluid change method: The traditional manual method only replaces the fluid in the transmission oil pan, leaving some ATF inside the transmission that cannot be removed. After the change, new and old fluids are mixed, resulting in an incomplete replacement that doesn't fully serve the purpose of changing the fluid. 2. Circulation machine transmission fluid change method: Using a circulation machine to replace ATF involves simultaneously extracting old fluid and injecting new fluid, using pressure to push out the old fluid with the new one. This ensures that the transmission is filled with new ATF, which can be visually confirmed on the equipment, achieving a complete replacement effect. Generally, using a circulation machine requires more than double the amount of new fluid compared to the traditional manual method. Although the cost increases, the effect is significantly better. A circulation machine generates pressure to dynamically replace automatic transmission fluid, achieving a replacement rate of over 90%. The operation process is simple but requires equipment support.
19
3
Share

Why Does the Engine Belt Make Abnormal Noises?

Abnormal noises from the engine belt may be due to a reduced friction coefficient on the belt surface or excessive belt wear, requiring immediate inspection and replacement by the owner. Below is relevant information about engine belts: 1. Replacement Interval: The replacement cycle for engine belts varies by vehicle model. Typically, the timing belt should be replaced every 60,000 to 80,000 kilometers. Some higher-quality belts may last up to 100,000 kilometers. 2. Precautions: During routine maintenance, it is advisable to regularly inspect the timing belt. If cracks are found, do not continue using it; replace it immediately to avoid potentially severe consequences.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.