What is the fuel consumption of the Haval H5 gasoline 2.0T?

1 Answers
MacChristian
07/30/25 12:05am
Haval H5 gasoline 2.0T has a fuel consumption of 11-13L per 100 kilometers. There are three methods to reduce vehicle fuel consumption: 1. Minimize the vehicle weight: Keep the interior as simple as possible and avoid carrying unnecessary items. Each additional kilogram of load increases fuel consumption by 1%; 2. Avoid excessive vehicle modifications: Adding spoilers, protective covers, or rear wings may disrupt the original aerodynamic design, increasing wind resistance and consuming extra fuel. Modifying lighting systems increases electrical usage, leading to unnecessary fuel consumption; 3. Develop good driving habits: Avoid sudden acceleration, driving at high speeds in low gears, prolonged idling, frequent lane changes, or braking. Aim for smooth starts, steady-speed driving, and reduced braking.
Was this review help?
4
0
Share
More Forum Discussions

Does Not Fully Depressing the Clutch When Shifting Gears Affect the Car?

Not fully depressing the clutch when shifting gears, if done frequently, can cause significant harm to the car. Some impatient drivers rush to shift gears without fully depressing the clutch, which not only makes it difficult to engage the gear accurately but also causes fatal damage to the manual transmission over time. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. The clutch is a common component in mechanical transmissions, allowing the drivetrain to be engaged or disengaged as needed. Functions of the Clutch: Ensures smooth car starts, facilitates smooth gear shifting, and prevents transmission overload. The clutch is used for gear changes, but keeping the foot on the clutch for extended periods will shorten its lifespan.
1
2
Share

What Causes Diesel Engine Idle Speed to Fluctuate Unsteadily?

Common causes of unstable diesel engine idle speed are as follows: 1. Cylinder issues: Excessive air leakage in the cylinder during idle results in significant energy loss within the cylinder, leading to lower compression temperature and pressure, poor fuel atomization, and greater combustion fluctuations. 2. Insufficient fuel supply: The fuel supply during idle is minimal, and slight variations in fuel supply to each cylinder can cause different working conditions among cylinders. This uneven fuel distribution during idle leads to the diesel engine's idle speed hunting phenomenon. 3. Unstable fuel supply: The direct injection in diesel engines has led to higher injection pressures, especially with the use of multi-hole injectors. This makes the injectors less precise when delivering small fuel quantities, prone to fluctuations. Unstable fuel supply is a major cause of unstable idle speed. 4. System aging: Prolonged use and aging of the fuel injection system cause variations in components like injectors and delivery valves among cylinders, leading to further uneven fuel distribution and exacerbating idle speed fluctuations.
10
0
Share

How to Reset the Maintenance Light on a Zotye?

The method to reset the maintenance light on a Zotye: Turn on the ignition switch, press and hold the reset button with one hand, then turn off the ignition switch with the other hand. Release the button when the clock and mileage on the dashboard completely disappear. Press and hold the reset button again, then turn on the ignition switch once more to successfully reset. Taking the 2018 Zotye T700 as an example, its body dimensions are 4748mm in length, 1933mm in width, and 1697mm in height, with a wheelbase of 2850mm, a fuel tank capacity of 64 liters, and a curb weight of 1787kg. This model is equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 177PS, a maximum power of 130kW, a maximum torque of 245Nm, paired with a 6-speed dual-clutch transmission.
19
1
Share

How to Choose a Parking Spot When Needing to Park a Motor Vehicle on the Roadside?

When parking a motor vehicle on the roadside, it must be parked within a designated parking space. Below are the precautions to take when needing to park a motor vehicle on the roadside: 1. Turn on the right turn signal in advance: Motor vehicles should use turn signals as follows: turn on the left turn signal in advance when making a left turn, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn; turn on the right turn signal in advance when making a right turn, changing lanes to the right, returning to the original lane after overtaking, or parking on the roadside. 2. No-parking zones: Do not park in areas with no-parking signs or markings, sections of road with barriers separating motor vehicle lanes from non-motor vehicle lanes or sidewalks, crosswalks, or construction zones.
1
0
Share

Why is the right reverse parking always too close?

The reason why the right reverse parking is too close: the timing of turning the steering wheel back is too late when entering the parking space. Speed control: Maintain a consistent driving speed throughout the process using first gear or reverse gear at idle speed. Start at a certain speed and maintain that speed while driving. Steering control: Carefully observe during the reverse process, grasp the key points of steering, and turn at the appropriate time. Steering wheel control: Control the driving path. During the test, the car's driving path mainly depends on the speed of turning the steering wheel and the driving speed. When reversing, accurately align with the boundary lines and promptly adjust the direction to ensure the car enters the parking space straight.
3
5
Share

What are the three major components of Venucia?

Venucia's three major components are the engine, chassis, and transmission. The engine is like the heart of a car, responsible for providing the main power, as well as cooling, fuel supply, and lubrication. The chassis is like the skeleton of a car, supporting the integrity of the entire car structure, and its technology directly affects the car's stability and handling. The transmission has various structural divisions, assisting in idling and reversing. Taking the 2020 Venucia D60 as an example, its body dimensions are 4756mm in length, 1803mm in width, and 1487mm in height, with a wheelbase of 2700mm. This car is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 126ps, a maximum power of 93kw, and a maximum torque of 168nm, paired with a 5-speed manual transmission.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.