What is the fuel consumption of the Haval Chitu?

3 Answers
SpencerDella
07/29/25 8:15pm
The fuel consumption of the Haval Chitu is 6.2L. Taking the Haval Chitu 2021 1.5T Silver Rabbit as an example: 1. Body dimensions: It is a compact 5-door, 5-seat SUV under Great Wall Motors, with a length, width, and height of 4470mm, 1898mm, and 1625mm respectively, a wheelbase of 2700mm, a fuel tank capacity of 55L, and a front-wheel-drive configuration. 2. Power: The Haval Chitu 2021 1.5T Silver Rabbit's engine has a maximum torque of 275 N·m, with the maximum torque range between 1500 to 4000 rpm. 3. Suspension: The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
14
3
Share
DiBenjamin
08/14/25 4:41pm
I've been driving the Haval Chitu for almost a year now, with an average fuel consumption of around 7 liters per 100 kilometers. In actual driving, it can reach 8 liters in congested city traffic, while on highways it's more fuel-efficient, dropping to about 5.8 liters, making it quite suitable for daily commuting. Many factors affect fuel consumption, such as driving habits—rapid acceleration and hard braking increase fuel usage, so it's recommended to start smoothly and maintain a steady speed. Running the air conditioning at high settings or carrying heavy loads in the trunk can also raise fuel consumption. I usually check the tire pressure to keep it at 2.5, which reduces rolling resistance and saves some fuel. Regular engine maintenance is also important; changing the oil and cleaning the filter can improve efficiency. Fuel consumption is slightly higher in the summer heat, while in winter, avoiding prolonged warm-up saves fuel and extends engine life. Remembering these small tips can save a lot of money in the long run. I recommend keeping track of refueling data to gradually optimize efficiency.
Was this review help?
10
4
Share
Expand All
Karl
10/16/25 3:24am
From a technical perspective, the official fuel consumption data for the Haval Chitu ranges from 5.8 to 8.0 liters per 100 kilometers, depending on different versions such as the performance of the 1.5T engine. Actual fuel consumption is influenced by many factors, such as transmission tuning and lightweight body design, which help with energy efficiency. Driving modes have a significant impact on fuel consumption, with ECO mode being the most economical on smooth roads, while Sport mode consumes more fuel in urban areas. Engine operating condition optimization is also crucial, with the lowest fuel consumption during high-speed cruising due to efficient engine operation. Driving recommendations include avoiding frequent low-speed stop-and-go traffic and utilizing engine braking to assist with deceleration. Additionally, checking electrical systems like spark plugs for carbon buildup, which severely affects combustion efficiency, is important. Switching to low rolling resistance tires can slightly reduce fuel consumption, and maintaining an overall average of around 6 liters is achievable.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

Why does the Buick GL8 jerk during acceleration?

Buick GL8 transmission usually produces abnormal noise and jerking sensation only when there is a malfunction. Causes of such faults: High engine idle speed; Improper adjustment of throttle cable or throttle position sensor, resulting in excessively high main oil circuit pressure; Fault in the main oil circuit pressure regulating valve, causing excessively high main oil circuit pressure; Slipping of shift execution components; Oil pressure solenoid valve not working; Fault in the computer. Buick GL8 exterior: The new generation Buick GL8 has a more powerful appearance, featuring a waterfall-style grille paired with a winged chrome strip, which traverses the double-layer combined full LED headlights with rich layers. On the side of the body, the hidden D-pillar design creates a floating roof effect. In addition, the designer rarely put effort into the roof, with a chrome trim running from the A-pillar to the D-pillar illuminating the roof.
18
3
Share

Is Undercoating Really Necessary?

Installing undercoating is indeed quite necessary. Undercoating serves the following 4 purposes: Undercoating prevents chassis rust: During rain, humidity, or snow when de-icing agents damage the chassis, undercoating protects it from corrosion and prevents screw loosening. Effectively prevents impacts and scrapes: On uneven road conditions, scrapes and collisions are common. Undercoating provides elasticity to the chassis, and a layer of rubberized material effectively reduces damage, protecting the chassis. Provides cooling and heat insulation: While driving, heat from the ground transfers to the car interior through the chassis, requiring air conditioning to cool down, thus increasing fuel consumption. Since undercoating has excellent heat insulation properties, it prevents interior temperature rise, reducing unnecessary fuel consumption. Noise reduction: At high speeds, wind and tire noise can be irritating. Undercoating effectively reduces noise transmitted from the chassis, providing sound insulation and noise reduction, ensuring a comfortable driving experience inside the car.
18
0
Share

What is the Purpose of a Car Shark Fin Antenna?

Five functions of car shark fin antennas: 1. Safety. Overcoming the shortcomings of traditional telescopic rod antennas, whip antennas, and car glass antennas, it integrates all the functions of conventional antennas using the latest modern electronic technology. The built-in anti-theft structure effectively prevents antenna theft, offering higher safety. 2. Powerful functionality. The shark fin car antenna integrates various robust automotive electronic functions such as FM, GPS, and GSM, effectively combining 'fashion' with 'functionality.' 3. Noise reduction. Incorporating aerodynamic and aesthetic principles, it effectively reduces airflow noise, making driving quieter. 4. Convenience. There's no need to remove the antenna during automatic car washes or when entering spaces with limited clearance, saving time and hassle. 5. Static reduction. The shark fin antenna utilizes the principle of electron discharge at the tip, directing static electricity to the tail tip of the antenna for release. Regardless of where the shark fin antenna is installed on the car, it can effectively reduce static electricity on the car's surface.
11
2
Share

How to Determine Cylinder Scoring?

Engine cylinder scoring can be identified by observing symptoms such as abnormal rise in coolant temperature, reduced oil pressure, smoke from the oil filler port, power loss, cylinder flooding, or oil traces on spark plugs. For engines at idle, audible knocking sounds and air leakage clearly indicate severe cylinder scoring. The main causes of cylinder scoring include: 1. Excessive clearance between piston and cylinder. 2. Poor lubrication between piston and cylinder, or improper oil selection. 3. Broken or seized piston rings, or fractured/dislodged piston pin circlips. 4. Piston and piston ring tilting to one side, tightly pressing against the cylinder wall. 5. Prolonged high-speed or heavy-load operation without proper break-in after engine overhaul. 6. Inadequate engine cooling or cooling system malfunctions.
16
2
Share

What does the triangle exclamation mark mean in the H6?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's regular performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in vehicles. Besides the triangle exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. Transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, primarily indicating brake system failure or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire pressure abnormality: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
10
0
Share

What are the main reasons for warming up the car in winter?

The reason for warming up the car is that after the vehicle has been parked for a period of time, the engine oil inside the engine flows back into the oil pan at the lower part of the engine. Therefore, when the engine is first started, the upper part of the engine is in a state without oil and lacks lubrication. It takes about 30 seconds after starting for the oil pump to deliver oil to the engine's pistons, connecting rods, crankshaft, and other components. When the vehicle starts, the idle lubrication has not yet been fully supplied, making this the period when wear is most likely to occur. Here are the correct methods for warming up the car: After starting the engine, wait for 30 seconds to one minute before driving, but avoid driving at high speeds during this time. Maintain a low speed with the engine speed not exceeding 3000-3500 RPM, generally keeping it around 2000 RPM. Otherwise, the wear on the engine and transmission may become irreversible. Once the engine temperature rises to the normal operating temperature (which usually takes about 3 to 5 minutes), you can resume normal driving.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.