What is the fuel consumption of the H6?

1 Answers
DiValeria
07/29/25 5:09pm
The fuel consumption of the Haval H6 is 7.07L/km. Below is a relevant introduction to vehicle fuel consumption: Fuel consumption per 100 kilometers: This refers to the amount of fuel consumed by a vehicle traveling 100 kilometers on the road at a certain speed, serving as a theoretical indicator for the vehicle. The fuel consumption per 100 kilometers is a value obtained by manufacturers in an objective environment, using a dynamometer installed on the vehicle's chassis to measure and convert into speed parameters, then calculating the theoretical experimental fuel consumption data per 100 kilometers for the model under specified speeds. Relationship between fuel consumption and displacement: Although fuel consumption is related to displacement, this relationship is not absolute. A larger cylinder volume can accommodate more combustible mixture, so under all other conditions being equal, an engine with a larger cylinder volume will have better/higher power/fuel consumption.
Was this review help?
6
4
Share
More Forum Discussions

Which gear should be used for long downhill slopes in an automatic transmission?

When driving downhill on a long slope with an automatic transmission, it is recommended to use the L gear. The main purpose is to keep the engine at a low speed while still providing a braking effect. Especially on long downhill slopes, continuously pressing the brake pedal while in D gear can easily cause the brake pads to overheat and lose their braking effectiveness, which can be life-threatening in severe cases. The methods for descending long slopes are as follows: When the L gear is available: For automatic transmission cars descending long slopes, use the L gear if available; if there is no L gear, use manual mode. When manual mode is not available: Use the S gear while pressing the brake pedal. When neither L gear, S gear, nor manual mode is available: Use D gear. This is because the lower the gear, the greater the engine's braking force. Maintaining the vehicle in a lower gear results in a slower speed increase compared to higher gears. Combined with the use of the brake pedal, the braking effect is more significant and safer.
5
2
Share

What is the fuel tank capacity of the Mazda6 in liters?

Mazda6 has a fuel tank capacity of 64 liters. Taking the Mazda6 2015 2.0L Automatic Luxury model as an example, its body dimensions are 4670mm in length, 1780mm in width, and 1435mm in height, with a wheelbase of 2675mm. The body structure is a 4-door, 5-seater sedan. The Mazda6 is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 147ps and a maximum power of 108kw. It is paired with a 5-speed automatic transmission and features front-wheel drive. The front suspension type is a double-wishbone independent suspension with a stabilizer bar, while the rear suspension is a multi-link independent suspension. The tire specification is 205/55R16.
18
1
Share

What are the causes of poor engine acceleration?

The causes of poor engine acceleration are: 1. Air leakage in the intake system; 2. Low cylinder pressure or excessively small valve clearance; 3. Malfunctioning throttle position sensor. When poor engine acceleration occurs, the following inspections can be performed: 1. Check if the air filter is clogged and clean or replace it promptly; 2. Inspect the intake system for any air leaks; 3. Perform fault self-diagnosis to check for any fault codes. An engine is a machine capable of converting other forms of energy into mechanical energy, determining the vehicle's power, fuel economy, stability, and environmental performance. Automotive engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid power systems.
4
2
Share

What are the dimensions of the Lincoln Nautilus?

The body dimensions of the Lincoln Nautilus are 4849mm in length, 1934mm in width, and 1693mm in height, as per official data. The length of the Lincoln Nautilus refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane, touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane, touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. The Lincoln Nautilus is equipped with either a 2.0L turbocharged engine or a 2.7L twin-turbocharged engine, paired with an 8-speed automatic transmission and an 8-speed automatic manual transmission, respectively. The 2.7L engine delivers a maximum horsepower of 188 and a maximum torque of 245 Nm, while the 2.0L engine produces a maximum torque of 322 Nm. National regulations stipulate certain standards for vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is intended to provide adequate lateral clearance for overtaking between adjacent lanes. In other words, under national standards, the significance of vehicle width data lies in ensuring sufficient space during overtaking to prevent accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
14
4
Share

What are the reasons for slow engine acceleration?

Engine acceleration slow reasons are: 1. Engine injector clogged, fuel pipe leaking, fuel pump power reduced, fuel filter blocked; 2. Air filter, throttle valve blocked; 3. Spark plug ignition poor; 4. Engine cylinder missing operation abnormal or shutdown; 5. Compressor power large; 6. Timing belt tooth skipping or engine maintenance due to misoperation. Engine acceleration slow treatment methods are: 1. Use high-quality fuel; 2. Clean air filter, throttle valve; 3. Recheck engine timing; 4. Recheck engine timing; 5. Replace new air filter element or clean three-way catalytic converter.
12
0
Share

How to Lock the Trunk?

Locking the trunk can be done by: 1. Manually closing the trunk; 2. Pressing the automatic close button to have the trunk close automatically. Reasons why a car trunk may not close include: 1. Spring rod malfunction; 2. Mismatch between the limiting rubber block and the locking mechanism; 3. Faulty trunk control wiring or hydraulic support rods. Methods to address a trunk that won't close: 1. Avoid attempting to close it a second time; 2. Promptly take the car to a repair shop or 4S store for inspection. Ways to open the trunk: 1. Press the trunk button switch; 2. Pull the handle icon on the trunk lid.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.