What is the fuel consumption of the GS4?

1 Answers
OAdelyn
07/30/25 5:56am
GAC Trumpchi GS4 consumes approximately 8 to 9 liters per 100 kilometers. The performance of the GS4 Trumpchi is as follows: 1. Advantages: The exterior is stylish and elegant, and the space is indeed large and sufficient. 'Large' refers to the external space in terms of roof height and vehicle length, while 'sufficient' refers to the interior space, providing a comfortable and ample seating experience. 2. Configuration: Features such as automatic handbrake, hill start assist, and one-key start are included. The fuel consumption is satisfactory for a domestic brand, currently around 8.3 liters. 3. Disadvantages: The battery is prone to lack under-voltage protection, and the configuration is not particularly outstanding, lacking features like lane change assist, 360-degree panoramic view, and panoramic sunroof. 4. Exterior: The exterior is elegant, stable, and upscale, belonging to the type of model that is pleasing to the eye and enduring. 5. Interior: The interior craftsmanship is average, with a strong plastic feel, and the absence of genuine leather seats is indeed a regret.
Was this review help?
7
2
Share
More Forum Discussions

What Causes the Rattling Noise in the Car Trunk?

Common causes of rattling noise in the car trunk include the trunk door not being properly closed and loose trunk screws. Below is a detailed explanation of the reasons for rattling noise in the car trunk: Trunk door not being properly closed: Avoid placing heavy objects in the car trunk, and always check if the trunk is properly closed before driving. If the trunk door is not properly closed, it can cause rattling noise in the car trunk. Loose trunk screws: Empty the trunk, remove the spare tire and tools, and check if the noise persists. If it does, inspect the trunk screws. Loose trunk screws can cause rattling noise.
10
5
Share

Can New Energy Vehicles Still Enjoy Warranty After Ownership Transfer?

New energy vehicles can still enjoy warranty after ownership transfer. In most regions, the transfer time and procedures for new energy vehicles are the same as those for blue-plate fuel vehicles, requiring only vehicle ownership for the transfer. However, it should be noted that blue-plate fuel vehicles have license plates tied to the person, not the vehicle, whereas new energy vehicle plates are tied to the vehicle, not the person. This means that the transfer of a new energy vehicle must include the license plate, and the vehicle and plate can only be separated six months after the transfer date. Below is relevant information about the transfer process: Transfer Registration Regulations: Provide the corresponding vehicle documentation, including the original and photocopy of the organization code certificate for companies. The organization code certificate must be within its annual inspection validity period. The previous owner must bring the original ID card and drive the vehicle to the vehicle management office. For companies, the authorized person must stamp the company seal on the power of attorney, and the authorized person must bring the original ID card to the vehicle management office to complete the transfer procedures. Required Documentation: The company's official seal and power of attorney, the original and photocopy of the authorized agent's ID card, and the agent's commitment letter. For registered motor vehicles where ownership has been transferred, the new owner must apply for transfer registration at the local vehicle management office within 30 days of the vehicle's delivery. Before applying for transfer registration, the owner must resolve any traffic violations and accidents related to the vehicle.
11
0
Share

How Long Does It Take for a Car Horn to Recover After Getting Wet?

Car horn recovery time after getting wet depends on the extent of water ingress. Below are two scenarios of car horn water ingress: Minor water ingress: In this case, no special treatment is usually needed. Simply allow the moisture inside the horn to evaporate naturally over 1 to 2 days. Once the water dries, the horn will return to normal. It's best to remove the horn and reinstall it after 1-2 days when completely dry. Severe water ingress: This situation requires disassembling the horn and using a hairdryer to blow-dry it. The heat from the hairdryer will accelerate the evaporation of internal moisture. The horn will function normally again after drying. If not addressed promptly, it may cause circuit short circuits and horn failure.
18
3
Share

Where is the VIN located on an electric vehicle?

Electric vehicles typically display the VIN in a rectangular slot below the handlebars, usually represented in a purely numerical format. Below is relevant information about VINs: VIN Introduction: The VIN, also known as the vehicle identification number, is a unique code assigned by the manufacturer to identify a specific vehicle. The VIN consists of a 17-character alphanumeric code, also referred to as the 17-digit identification code, chassis number, or 17-digit number. Functions of VIN: 1. Vehicle identification - In certain special circumstances, the VIN can accurately identify your vehicle, saving time due to its uniqueness. 2. Traffic violation queries - The VIN is required to check for traffic violations. As the vehicle's identification card, the VIN should be carefully safeguarded.
20
1
Share

How to Obtain a Heavy Truck Driver's License?

The driver's license for heavy trucks falls under the B2 category. You can directly apply for the B2 driver's license test without needing to obtain a small vehicle driver's license first. However, if you intend to drive a semi-trailer, you must first obtain a large vehicle driver's license before applying. To obtain the license, you need to pass three subject tests. Additional information: 1. Heavy and medium-duty trucks are issued large truck license plates (commonly known as yellow plates): Trucks with a length greater than or equal to 6 meters and a total mass greater than or equal to 12,000 kg are classified as heavy-duty trucks; trucks with a length greater than or equal to 6 meters and a total mass greater than or equal to 4,500 kg but less than 12,000 kg are classified as medium-duty trucks. 2. Light and mini trucks are issued small truck license plates (commonly known as blue plates): Trucks with a length less than 6 meters and a total mass less than 4,500 kg are classified as light-duty trucks; trucks with a length less than or equal to 3.5 meters and a load capacity less than or equal to 750 kg are classified as mini trucks. 3. Foreign-invested vehicle license plates (commonly known as black plates): All trucks owned by foreign-invested enterprises, regardless of type, are issued foreign-invested vehicle license plates (commonly known as black plates). The relevant departments of the Municipal Public Security Bureau Traffic Police Bureau require registered truck owners and drivers to conscientiously abide by traffic laws and regulations, drive in compliance with the rules, and ensure safe driving.
13
5
Share

How to reset the maintenance light on a BMW 530?

BMW 530 maintenance light reset method is: 1. Turn off the ignition switch and shut down the engine; 2. Press the dashboard reset button; 3. Turn on the ignition switch to power up and illuminate the dashboard; 4. Hold the reset button for 5 seconds until OILSERVICE appears, then release the reset button; 5. Press the reset button again for about 5 seconds until RESET starts flashing, indicating the reset is complete. The BMW 530 belongs to the mid-to-large-sized car category. Taking the BMW 530 2021 Sport Package as an example, its body structure is a 4-door, 5-seater sedan with body dimensions of: length 5106 mm, width 1868 mm, height 1500 mm, and a wheelbase of 3105 mm.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.