What is the fuel consumption of the Great Wall Haval F7?

2 Answers
Jones
07/24/25 12:04am
The fuel consumption of the Great Wall Haval F7 varies depending on the model: 1. The 1.5t model has a fuel consumption range of 8.85 to 11.49 liters; 2. The 2.0t model has a fuel consumption range of 10.29 to 12.64 liters. The Great Wall Haval F7 is a compact SUV under the Great Wall Motors. Taking the 2021 Haval F7 two-wheel drive i-show as an example, its body dimensions are: length 4620mm, width 1846mm, height 1690mm, and the wheelbase is 2725mm. The 2021 Haval F7 two-wheel drive i-show adopts a front-wheel drive system, with a front suspension using MacPherson independent suspension and a rear suspension using double-wishbone independent suspension.
Was this review help?
15
4
Share
LaAmara
08/10/25 7:49pm
The fuel consumption of the Great Wall Haval F7 depends on the model. The official figure for the 1.5T engine is 7-8 liters per 100 km in combined conditions, while the 2.0T may reach 8-10 liters. I've used the 2.0T 4WD version, averaging 7.5 liters on highways and 12 liters in the city—the big difference is due to driving habits like rapid acceleration or traffic congestion increasing consumption. The high drag coefficient causes fuel consumption to spike during acceleration, and using the AC at full blast can add about 1 liter, so I avoid it in summer and prefer window ventilation. Vehicle weight is also a factor; an empty car saves fuel on highways, while a full load increases consumption by about 0.5 liters. I recommend frequently checking the dashboard's average fuel consumption to monitor changes, testing the car on highways when new, and maintaining it with clean air filters and regular oil changes to improve efficiency. Overall, it's quite economical among SUVs in its class.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

How to Use a Nissan Dash Cam?

Insert the TF card while the device is powered off, then briefly press the power button to turn it on. Scan the QR code provided in the manufacturer's manual to install the app on your phone. Before opening the app, establish a Wi-Fi connection between your phone and the dash cam. Once connected, a blue recording indicator light flashing once per second indicates that recording is in progress.
15
2
Share

How to Remove and Install a Wiper Motor?

Press the locking clip and disconnect the wiring harness connector simultaneously. Use a 23mm socket with a breaker bar to remove the two fixing nuts of the wiper arm assembly. Press the bolt of the wiper transmission bracket by hand to remove the wiper.
1
2
Share

How to Step on the Clutch and Brake When Starting?

First, step on the brake and clutch simultaneously and slowly. Pull up the handbrake and shift to neutral, then release the brake and clutch, and the vehicle will come to a stop. Slowly release the clutch while simultaneously and gradually releasing the brake, observing the changes in the vehicle's condition. When the clutch is released to the point where the vehicle starts to shake, keep the clutch foot steady and simultaneously release the handbrake with the right hand. Move the foot from the brake to the accelerator, gently press the accelerator, and slowly release the clutch to start the vehicle.
13
5
Share

Where is the wheel hub located on a car?

The wheel hub is located at the center of the wheel where the axle is installed, commonly referred to as the "rim" or "steel rim." Wheel hubs are prone to accumulating dirt, and if not cleaned for an extended period, they may corrode or deform, posing safety hazards. Therefore, special attention should be paid to the maintenance of wheel hubs. The main parameters of a car wheel hub include: hub size, PCD, offset (ET), and center bore. Hub size consists of two parameters: the diameter of the tire ring and the width of the tire ring. PCD: Refers to the pitch circle diameter of the wheel hub's bolt holes. Offset (also known as offset or ET): This is the distance between the mounting surface and the centerline of the wheel hub, used to adjust the wheel track and ensure the wheel does not interfere with the car body. Center Bore: This is the large hole in the middle of the wheel hub. Depending on the characteristics and requirements of different car models, the surface treatment process of the wheel hub may vary, generally categorized into painting and electroplating. For standard car models, wheel hubs are less focused on appearance, with good heat dissipation being a basic requirement. The process typically involves painting, which includes spraying followed by baking, offering an economical cost, vibrant colors, and long-lasting durability. Wheel Hub Maintenance: Choose the right cleaner: Household cleaners and common dishwashing detergents on the market, being either alkaline or acidic, can be highly corrosive to the wheel hub's surface. Opt for a neutral soap solution to clean and avoid exposing the wheels to strong chemicals. When the wheel hub is at a high temperature, avoid washing it directly with cold water. Wait for it to cool naturally before cleaning, as immediate cold water contact can damage the aluminum alloy hub and even deform the brake disc, affecting braking performance.
6
0
Share

How to Call to Move a Car?

If your car is blocked by another vehicle, you can call the owner to move it. Some car owners leave their phone numbers on the front windshield, which is a convenient method. You can also dial 12580, provide the license plate number to the operator, and they will help you locate and connect directly to the car owner. Another way is to contact the car owner's insurance company through the insurance sticker on the front windshield. By providing the vehicle model and license plate number to the insurance company, you can get in touch with the owner.
15
4
Share

How to reset the maintenance light on Leopaard CS10?

First, press the wrench button with your right hand while turning on the ignition with your left hand. Release the wrench button with your right hand and then press the minute adjustment button on the time setting. Turn off the ignition and remove your right hand from the time button. Restart the ignition or start the engine, and the maintenance reminder will disappear.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.