What is the fuel consumption of the Geely Vision X3 Pro?

2 Answers
DeJosephine
09/01/25 6:32am
The fuel consumption of the Geely Vision X3 Pro is 7.69L/100km. Below is a related introduction to automobile fuel consumption: 1. Fuel consumption and displacement: Although fuel consumption is related to displacement, this relationship is not absolute. A larger cylinder volume (displacement) can accommodate more combustible mixture (air-fuel), so under all other conditions being equal, an engine with a larger cylinder volume (displacement) will naturally have better/higher power/fuel consumption. 2. Fuel consumption and RPM: During daily driving, the RPM range is generally between 1000-3000 RPM, and the maximum RPM for ordinary family cars is around 6000 RPM. However, racing cars maintain operation at twice the maximum RPM of family cars (over 10,000 RPM) during races, which naturally results in very high fuel consumption.
Was this review help?
9
0
Share
CamillaRose
09/14/25 2:24am
As a long-term owner of the Geely Vision X3 Pro for nearly a year, my real-world fuel consumption is about 7.5-8L/100km in urban areas, dropping to around 6L on highways. The official WLTC combined fuel consumption is 6.7L/100km, which is quite accurate. Many factors affect fuel efficiency, such as my habit of smooth driving with minimal hard braking or acceleration. Fuel consumption tends to spike in city traffic jams but improves on highways. The car is equipped with a 1.5L engine, lightweight yet well-balanced, providing sufficient power for daily use. Fuel-saving tips include regular maintenance with oil changes, checking tire pressure to ensure it meets standards, and using ECO mode for slightly better efficiency. Compared to competitors like the Chery Tiggo 3x, the X3 Pro's fuel consumption is on par, averaging around 7L, making it economical for family use. Overall, with mindful driving habits and proper maintenance, keeping fuel consumption under control is no issue, and the car performs smoothly overall.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

What are the reasons why a car cannot move after starting?

There are several reasons why a car cannot move after starting: 1. The throttle and engine oil have poor low-temperature fluidity; 2. The throttle is too dirty, with excessive carbon deposits in the intake tract, fuel injectors, and intake valves; 3. Poor fuel quality; 4. The fuel pump and fuel lines are excessively dirty; 5. Poor contact of the water temperature sensor; 6. The battery has not been replaced for too long; 7. The engine oil viscosity is too low. Solutions to the problem of a car not moving after starting: 1. Inspect and clean carbon deposits from the throttle, intake tract, fuel injectors, and intake valves; 2. Replace with high-quality fuel; 3. Check the battery's condition and replace it promptly if necessary; 4. Clean the fuel pump and fuel lines; 5. Check if the water temperature sensor has poor contact.
20
1
Share

What is the ledpaard car logo?

ledpaard is the logo of Leopaard, and its models include Feiteng, Heijingang, Leopaard CS6, Leopaard CS7, Leopaard CS9, etc. Taking the 2013 Feiteng as an example, it belongs to the small SUV category, with body dimensions of: length 4210mm, width 1750mm, height 1840mm, a wheelbase of 2450mm, a fuel tank capacity of 53 liters, and a curb weight of 1365kg. The 2013 Feiteng features a front MacPherson independent suspension and a rear multi-link non-independent suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 121PS, a maximum power of 89kW, and a maximum torque of 168Nm, paired with a 5-speed manual transmission.
16
1
Share

What is the M gear in the new Bora?

The M gear in the new Bora automatic transmission car is the manual mode of the automated manual transmission. When the car is shifted to M gear, it automatically switches to manual mode, similar to manual transmission cars, requiring downshifting at low speeds and upshifting at high speeds. The M gear can be directly switched from the D gear without the need to stop. Generally, transmissions with M gear also have a '+' and '-' sign nearby. Gear shifting can be done by pushing the gear lever forward or backward or using steering wheel paddles. However, unlike manual transmissions, there is no need to release the throttle when shifting gears; you can directly shift up or down. However, there are limitations to gear shifting—it only works within safe parameters. For example, trying to shift up to 6th gear at 50 km/h or down to 1st gear at 100 km/h is not possible.
19
2
Share

Where is the Reverse Gear?

The reverse gear is marked as "R" and is usually labeled on the top of the gear lever or on the cover. There are several ways to engage the reverse gear by pulling the gear lever: 1. Press the gear lever downward to engage the reverse gear (common in manual transmissions, and some automatic transmission models also use this method). 2. Pull the gear lever directly to the reverse position, which can be done in either a curved or straight path. This is a method used in automatic transmissions, and the curved path is more common nowadays to prevent incorrect gear selection. 3. Some gear levers have a lock mechanism, either ring-shaped or single-sided. Hold the gear lever and lift the lock with your fingers to engage the reverse gear. 4. Lift the gear lever upward to engage the reverse gear.
1
1
Share

What Does Shock Absorber Damping Mean?

Solid vibration refers to the method of dissipating as much energy as possible in the damping layer when a solid vibrates, which is called damping vibration reduction. Damping refers to the effect of hindering the relative motion of an object and converting the kinetic energy into heat or other forms of energy that can be dissipated. The following are the advantages of damping vibration reduction: 1. Cast steel shell: It adopts alloy steel springs and is treated with spray coating, which has excellent weather resistance, effectively increases service life, and provides good shock absorption effect. 2. Good safety performance: The top and bottom are equipped with anti-slip and wear-resistant rubber as well as fixing bolts, greatly improving safety performance and making installation convenient. 3. Protection and extended service life: It can effectively isolate vibrations from various horizontal and vertical pumps, fans, air conditioning units, generator sets, diesel units, pipelines, and other power equipment, protecting and extending their service life.
4
5
Share

Where is the location of the Jinbei air conditioning filter?

The Jinbei air conditioning filter is located under the hood, and its function is to filter dust particles from the air, providing clean air for the car's air conditioning system. Taking the 2020 Jinbei F50 as an example, it belongs to the MPV category, with body dimensions of 4745mm in length, 1810mm in width, and 1845mm in height, a wheelbase of 2860mm, a fuel tank capacity of 50 liters, and a curb weight of 1480kg. The 2020 Jinbei F50 features a MacPherson strut front suspension and a leaf spring rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 118PS, a maximum power of 87kW, and a maximum torque of 154Nm, paired with a 5-speed manual transmission.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.