What is the fuel consumption of the Geely New Vision?

1 Answers
DiJudah
07/29/25 11:42pm
This model has a fuel consumption of 6.2 liters per 100 kilometers for the manual transmission version and 6.8 liters per 100 kilometers for the automatic transmission version. Below is an introduction to the fuel consumption of the Geely New Vision: 1. Introduction one: When driving on roads with heavy traffic congestion, the car frequently needs to stop and go. Starting from a standstill requires significant acceleration, during which the engine needs to output substantial power. 2. Introduction two: When driving in congested traffic, the car's engine spends some time in idle mode. During idle mode, the car's mileage does not increase, but the engine continues to run, which also leads to an increase in the car's fuel consumption per 100 kilometers.
Was this review help?
18
4
Share
More Forum Discussions

How to Avoid Stalling on a Hill Start?

Here are two techniques to prevent stalling during a hill start: 1. Slowly Release the Clutch: When releasing the clutch, do it gradually and avoid rushing. Once the car noticeably vibrates, release the brake. If the car hasn't started moving after fully releasing the brake, then slowly release the clutch completely, allowing the car to move normally. 2. Apply Throttle During Hill Start: If you don't press the accelerator slightly while starting on a hill, the engine might not have enough idle speed to move the car, causing it to stall. Reasons for Stalling During Hill Start: Releasing the clutch too quickly can cause the car to stall. On a hill, maintain steady control of the clutch and avoid rushing to release it. Carefully find the clutch's engagement point, also known as the 'half-clutch' position, where the car remains stationary—neither rolling backward nor moving forward. Some cars may also experience slight vibrations in this position.
1
3
Share

What does the 'a' below the electronic handbrake mean?

a stands for the Auto Hold system. Below is an introduction to the Auto Hold system: 1. The Auto Hold system (AUTOHOLD) is a technology application that enables automatic handbrake functionality while the car is in operation. This technology allows drivers to avoid prolonged braking when the vehicle comes to a stop and prevents unnecessary rolling when the automatic electronic parking brake is engaged. 2. The working principle of the Auto Hold system lies in the brake management system's control of the four-wheel brakes through the extended functionality of the electronic parking brake (EPB). In other words, the Auto Hold system is an extension of the electronic parking brake (EPB) and is controlled by the ESP component.
7
4
Share

Which engine oil is suitable for Civic?

Honda Civic can use 0W20 engine oil, which is designed to improve fuel economy. The number 0 represents the viscosity of the oil, with 0 being the smallest, indicating lower viscosity at low temperatures and better fluidity in cold conditions; W stands for winter-grade oil; 20 is the oil viscosity, where a smaller number like 20 is suitable for low-temperature use. The higher the number, the higher the temperature range the oil is designed for. Choosing the right oil depends on the operating temperature of the vehicle. Engine oils are classified as follows: High-temperature type (e.g., SAE20-SAE50): The number indicates the viscosity at 100 degrees, with higher numbers representing higher viscosity. Low-temperature type (e.g., SAE0W-SAE25W): W indicates winter use only, and the smaller the number, the lower the viscosity and the better the low-temperature fluidity. All-season type (e.g., SAE15W/40, 10W/40, 5W/50): Indicates that the viscosity grade at low temperatures meets the requirements of SAE15W, 10W, and 5W, respectively, while the high-temperature viscosity grade meets the requirements of SAE40 and 50, making it suitable for both winter and summer use.
2
4
Share

What does 280TGDI mean?

This is the rear emblem of a car. S5 stands for the 'model', 280 represents 'peak torque', and TGDI is the English abbreviation for the engine's highlight technologies, where T stands for turbocharging and GDI stands for gasoline direct injection technology. To put it in simpler terms, it refers to a turbocharged gasoline direct injection engine. Below is an introduction to TGDI: 1. As the most advanced powertrain system currently available, the TGDI engine combines cutting-edge technologies such as turbocharged intercooled TCI and gasoline direct injection GDI, offering numerous advantages including strong power and fuel economy. 2. This technology has now been widely adopted, with international automakers like Mercedes-Benz, BMW, General Motors, and Honda considering TGDI technology as a key competitive advantage in the future automotive market, investing in its development and utilization. 3. TGDI technology has also become an involuntary benchmark for measuring the technical level and R&D capabilities of international automotive companies.
20
5
Share

What Causes Engine Idle Stalling?

Here are the reasons for engine idle stalling: 1. Ignition system failure: Issues with components such as the ignition coil, ignition module, ignition ECU, distributor, ignition signal generator, sensors affecting ignition timing, or high-voltage wires can lead to misfires, weak sparks, or incorrect ignition timing, resulting in poor idle performance. 2. Neutral start switch circuit: In vehicles equipped with automatic transmissions, the ECU adjusts the idle speed based on signals from the neutral start switch. When the gear selector is in reverse or drive, the idle speed is automatically increased; otherwise, it is decreased. A faulty neutral start switch circuit can cause the ECU to receive incorrect signals, leading to excessively high or low idle speeds. 3. Fuel pump and fuel system: The fuel pump and fuel system affect fuel pressure. If the pressure is too low, the actual fuel injection volume decreases under the same energizing time of the injector coil, resulting in poorer spray quality and a lean idle mixture. Conversely, if the pressure is too high, excessive fuel injection occurs, leading to a rich mixture. Fuel system pressure is related to the technical condition of the fuel pressure regulator, fuel pump, fuel pressure solenoid valve, and their circuit operation.
13
5
Share

Which country does Nissan belong to?

Nissan Motor Corporation (NISSAN) is a Japanese automobile manufacturer established in 1933 in Yokohama, Kanagawa Prefecture. Currently, it has vehicle manufacturing bases in twenty countries and regions (including Japan) and provides products and services in over 160 countries and regions worldwide. Its main models include the Teana, Sylphy, X-Trail, and Qashqai. The Nissan logo features a circle representing the sun, with the Japanese phonetic characters for "Nissan" in the middle. The entire design symbolizes "the pursuit of a brighter future for people and automobiles." Key milestones in Nissan's development are as follows: 1933 – Japan Industries Co., Ltd. and Tobata Casting Co., Ltd. jointly registered "Automobile Manufacturing Co., Ltd." 1934 – "Automobile Manufacturing Co., Ltd." was renamed "Nissan Motor Co., Ltd." 1960 – Nissan established Nissan Motor Corporation in U.S.A. for sales operations. 2004 – Nissan's global sales reached 3.388 million vehicles.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.