What is the fuel consumption of the Geely Jiaji PHEV?

1 Answers
StSadie
07/30/25 9:04am
Geely Jiaji is relatively fuel-efficient, belonging to the MPV category, with a fuel consumption of around 2 liters per 100 kilometers. Introduction to Fuel Consumption: Fuel Consumption (Constant-Speed Fuel Economy): Constant-speed fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. Comprehensive Fuel Consumption: Comprehensive fuel consumption is tested under different conditions such as city roads, highways, and varying loads. It is only a reference, and the actual fuel consumption may be higher or lower than this figure. For example, driving daily in busy urban areas, frequently braking and accelerating, can lead to higher fuel consumption, even reaching 10 liters per 100 kilometers, which is quite normal.
Was this review help?
10
1
Share
More Forum Discussions

Is Hongqi a State-Owned Enterprise or a Central Enterprise?

Hongqi is a central enterprise. The following introduces the differences between state-owned enterprises and central enterprises: Different definitions: Central enterprises refer to state-owned companies directly under the relevant departments of the State Council; while state-owned enterprises generally refer to enterprises where state capital (local SASAC, finance) holds controlling shares, participates in shares, or is solely owned, and whose investment behavior is determined by the will and interests of local governments. Different industries controlled: Central enterprises are all in industries that control the lifeline of the country, such as aerospace, science and industry, nuclear power, shipbuilding, armaments, electronic technology, oil and gas, and other scarce resources; while state-owned enterprises, such as water conservancy, electric power, construction, chemical industry, etc., are non-monopoly resource-based enterprises and allow investment cooperation from high-quality private enterprises.
12
2
Share

What is the wading depth of the Sagitar?

The wading depth of the Sagitar is 300mm. The wading depth of the Sagitar is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Sagitar is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the paths taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and consider an alternative route.
2
4
Share

What maintenance does a BMW 3 Series need at 50,000 kilometers?

BMW 3 Series requires the following maintenance items at 50,000 kilometers: engine oil and oil filter replacement, spark plug replacement, and some basic inspections. BMW 3 Series exterior configuration: The long-wheelbase models come standard with features such as a panoramic sunroof and LED headlight assembly (including adaptive steering function), while the launch edition offers a luxury design package. The other three configurations provide M Sport package, M aerodynamic components, etc. BMW 3 Series interior: The new BMW 3 Series long-wheelbase version largely retains the main design of the overseas models. For example, it features a new floating LCD screen paired with a newly designed electronic gear lever and an M-branded three-spoke multifunction steering wheel. In terms of power, the new BMW 3 Series long-wheelbase version is equipped with the latest B-series 2.0T engine (model B48B20B), which delivers the same 184 horsepower as the current 320i/Li, but the tail badge has been changed to 325Li.
2
5
Share

What is the difference between Corolla EX and non-EX?

The differences between Corolla EX and non-EX lie in the interior rearview mirror function and the driver's seat adjustment. Below are the introductions of the two differences: Interior rearview mirror function: The Corolla EX is equipped with an interior rearview mirror function, while the Corolla is not. Driver's seat adjustment: The Corolla EX is equipped with a driver's seat adjustment function, while the Corolla is not. The Corolla is a product of Toyota Motors, and the domestic Corolla is already the ninth-generation product. Its VVTi engine is the first to be used in Toyota's domestic models. In terms of power, the Corolla is equipped with a 1.6L Toyota 1ZRFE all-aluminum inline four-cylinder engine, which has a displacement of 1.6L, a maximum power output of 88kw, and a peak torque of 152nm.
5
0
Share

Why Are Used Huasong 7 Cars So Cheap?

Used cars naturally depreciate in value, and the Huasong 7 has a particularly low resale value, which is why used models are so inexpensive. Here is some relevant information about the Huasong 7: Body Dimensions: The Huasong 7 measures 5104mm in length, 1909mm in width, and 1935mm in height, with a wheelbase of 3015mm. This model features a relatively long wheelbase, providing ample interior space. Model Type: The Huasong 7 is an MPV model equipped with BMW's N20B20 engine. It comes with two engine options: a low-power 2.0-liter turbocharged engine and a high-power 2.0-liter turbocharged engine. The low-power version delivers a maximum power of 150kW and a peak torque of 270Nm, with the maximum power achieved at 4800 rpm and the torque range spanning from 1250 to 4800 rpm. This engine incorporates BMW's Double VANOS and Valvetronic technologies and uses an aluminum alloy cylinder head and block.
9
4
Share

What type of engine oil is suitable for Kia KX3?

Kia KX3 can use 5W40 or 0W40 engine oil. Currently, the best-selling engine oils on the market include Mobil, Shell, and Castrol. The viscosity of engine oil changes with temperature, so special attention is needed to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The second number represents the kinematic viscosity of the oil at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Kia KX3 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passages to drain; Use a specialized wrench to remove the oil filter; Apply oil to the gasket of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check if the oil level is within the standard range.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.