What is the fuel consumption of the Geely Emgrand S?

1 Answers
VivienneDella
07/30/25 10:08am
Geely Emgrand S has a combined fuel consumption of 5.9L/100km. Currently, there are 4 models of Geely Emgrand S available for sale: CVT Flagship, CVT Luxury, CVT Premium, and Manual Comfort, all with a combined fuel consumption of 5.9L/100km. The above figures are based on the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.0-7.6L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle in advance when approaching a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline for combustion. Cars with greater weight also consume more fuel because they require greater driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
3
5
Share
More Forum Discussions

What is the function of an automotive pipeline pressure relief valve?

The function of an automotive pipeline pressure relief valve is to automatically open or close when the system reaches the upper limit of its safe working pressure, thereby reducing the working pressure and ensuring system safety. The pressure relief valve is essentially a protective device that safeguards the car engine and turbocharger. Also known as a safety valve, it is designed to automatically open or close based on the system's working pressure and is typically installed on equipment or pipelines in closed systems to protect system safety. The pressure relief valve consists of components such as a needle valve (I), a pressure gauge (2), a main valve (3), a pilot valve (4), and connecting pipes. The main valve is divided into upper and lower parts by a diaphragm, with the lower chamber serving as the water flow channel and the upper chamber as the control room, which regulates the opening and closing of the main valve disc.
17
1
Share

How many liters of engine oil does a Mercedes-Benz C200 require?

Mercedes-Benz C200 generally requires approximately 7 liters of engine oil, equipped with a 2.0T engine. Engine oil, also known as engine lubricant, serves multiple functions including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Automotive lubricants are categorized into mineral lubricants, synthetic lubricants, and semi-synthetic lubricants. The Mercedes-Benz C200 has body dimensions of 4526mm in length, 1728mm in width, and 1427mm in height, with a wheelbase of 2715mm. It features a fuel tank capacity of 62 liters, a curb weight of 1490kg, and utilizes rear-wheel drive.
3
5
Share

How long after applying putty can a car be painted?

After applying putty to a car, it can be painted after 3 days, but this also depends on the drying condition of the putty powder. If painting is done before the putty is completely dry, peeling may occur later. Automotive putty is used in car painting, applied over the first or second coat of primer after sanding, to fill minor defects, dents, scratches, or other processing marks, creating a smooth surface for the next coat of paint. Putty is characterized by high pigment and filler content, forming a thick paste that dries easily. Once dry, it becomes hard, fine, and easy to sand. Common types include water-based and oil-based putties, with oil-based putties further divided into alkyd, nitrocellulose, perchloroethylene, epoxy, and other varieties.
19
4
Share

What's the matter if the car screen doesn't light up?

Car screen not lighting up may be due to poor line contact, and it is necessary to check whether there is a loose connection in the line in time; it may also be because the power signal line has aged, and you can try to replace it with a new one. The car central control screen is a car electrical appliance with a relatively high failure rate, and it may become laggy after long-term use. The car multifunctional display screen is a screen that intuitively displays the status of various functions of the car in the form of images or text. The car multifunctional display screen is an important part of the car audio-visual system, which can receive car audio-visual signals and play them back on the display, and can also be used on similar sports tools of cars.
13
4
Share

Is engine shaking related to gasoline?

Engine shaking is related to gasoline. Using lower-octane gasoline can cause knocking, which leads to engine shaking. It is recommended to remove the fuel tank and drain the gasoline. The causes of engine shaking include: 1. Low cylinder pressure—if one cylinder is not functioning properly, it can result in a misfire; 2. Carbon buildup and oil deposits clogging the throttle valve, idle valve, or intake ports over time, leading to poor airflow and unstable idling or shaking; 3. Clogged fuel injectors—the injectors in fuel-injected vehicles are critical components, and deposits in gasoline can block the injector nozzles, causing uneven fuel distribution among cylinders and resulting in engine shaking; 4. Abnormal coolant temperature; 5. Broken high-voltage wires; 6. Faulty spark plugs; 7. Dirty air filter.
16
2
Share

Which brand is the original tire of the Corolla?

The original tires for the high-end configuration of the Corolla are Dunlop and Michelin, while the low-end configuration uses Bridgestone. The Corolla is a brand under Toyota, with body dimensions of 4630mm in length, 1775mm in width, and 1480mm in height, a wheelbase of 2700mm, a fuel tank capacity of 55 liters, and a minimum ground clearance of 145mm, classifying it as a compact sedan. The Corolla features front-wheel drive, engine types including naturally aspirated and turbocharged, and braking system with front ventilated discs and rear discs. It comes in three displacement models: 1.2T, 1.6L, and 1.8L. The interior of the Corolla is equipped with user-friendly configurations, a conventional center console design, and spacious, comfortable seats.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.