What is the fuel consumption of the Geely Emgrand GL?

1 Answers
BentleyDella
07/29/25 4:53pm
The official combined fuel consumption of the Geely Emgrand GL is 5.9L/100km. Relevant information about car fuel consumption is as follows: Constant-speed fuel consumption: refers to the fuel economy indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy. Road cycle fuel consumption: is the fuel economy indicator measured when a car drives in repeated cycles according to specified speeds and time norms on the road, also known as multi-condition road cycle fuel consumption. In the speed and time norms, each cycle includes various driving conditions, and specifies the gear shifting moments, braking and stopping times, as well as the values of driving speed, acceleration, and braking deceleration for each cycle.
Was this review help?
9
4
Share
More Forum Discussions

What are the treatment methods for car paint that has damaged the primer?

There are several treatment methods for car paint that has damaged the primer: 1. Small scratches damaging the primer: For minor scratches, a touch-up pen can be used. The touch-up pen can handle small scratches. If the rust is not severe, use very fine sandpaper dipped in water to gently remove the rust spots, but avoid sanding randomly—sand in straight lines in the same direction. After completely cleaning, apply a layer of primer. 2. Large areas of exposed primer: This requires repainting. If considering insurance issues and choosing not to repair immediately, rust prevention treatment (toothpaste) should be done. Apply a layer of wax and repair as much as possible. In this case, you can choose coarse wax with large abrasive particles; if coarse wax is unavailable, liquid wax can also be used.
17
4
Share

What are the three main types of new energy currently being developed and utilized?

Currently, the main types of new energy include solar energy, wind energy, geothermal energy, nuclear energy, etc. The following is a detailed introduction to new energy vehicles: 1. Power source: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources, or use conventional vehicle fuels with new on-board power devices, integrating advanced technologies in vehicle power control and driving to form vehicles with advanced technical principles. 2. Classification: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, hydrogen engine vehicles, and other new energy vehicles. 3. License plates: Special license plates for new energy vehicles are green with black characters and black borders. New energy vehicle license plates are gradient green, while large new energy vehicle license plates are yellow-green dual-colored.
6
3
Share

Does a Car Consume Fuel at Idle Speed?

As long as the car's engine is running, it will consume fuel. Here is the relevant content introduction: 1. Principle: At idle speed, the engine must be ready to respond to the driver's starting operation at any time. When starting the car, the vehicle changes from a stationary state to a moving state, so the engine needs to generate more torque than during normal driving. 2. Meaning of car idle speed: It refers to the condition after the car is started, under any load and without the need for external work, where the engine maintains the lowest and most stable speed by controlling the throttle solenoid valve's air intake through the onboard ECU. Different car models have different idle speed values due to different engines. Generally, the idle speed value ranges between 500 to 850 rpm, while the idle speed during a cold start can be around 1500 to 2000 rpm.
7
3
Share

Can I make an appointment without paying the retake fee?

Can I make an appointment without paying the retake fee. The following is the relevant introduction about driving school test appointment: 1. Make an appointment as early as possible: Try to make an appointment as early as possible within the time period when the system allows students to make an appointment. 2. Avoid peak appointment periods: Do not choose test sessions that show crowded exams. 3. Prioritize earlier sessions: Give priority to test sessions with higher rankings in the appointment queue. Note: Subject 2 and Subject 3 tests should be scheduled after ten days; within the validity period of the driving study certificate, the number of appointments for Subject 2 and Subject 3 road driving skill tests shall not exceed five times.
20
1
Share

What to Do If Someone Scratches Your Car in the Community and Flees?

If someone scratches your car in the community and flees, here are several methods to handle the situation: 1. Report to the police directly: If the damage to the vehicle is severe and the owner insists on finding the perpetrator, they can directly report to the police and request assistance in the investigation. Of course, the owner may need to cover the repair costs upfront. 2. Request surveillance footage from the property management: Generally, most communities have surveillance cameras. The owner can ask the property management to review the footage, identify the perpetrator, and seek compensation. 3. File a claim with the insurance company: This is the last resort when both reporting to the police and seeking help from the property management fail. Since the car belongs to the owner, repairs are necessary, and the owner may have to bear the loss themselves.
15
2
Share

What does 13 car mean?

13 car refers to a vehicle that was manufactured in the year 13 and also registered in the same year. Here are some precautions regarding car driving: 1. Cold car warm-up: Proper warm-up helps form an "oil film" between engine components, reducing wear. 2. Timely gear shifting: When driving manual transmission vehicles during the break-in period, shift gears promptly and appropriately, avoiding incorrect behaviors like high gear with low RPM or low gear with high RPM, and do not use a single gear for extended periods. 3. Timely maintenance: Simply follow the manufacturer's recommendations in the vehicle manual, perform inspections and maintenance at specified mileage or time intervals, including oil and oil filter changes, and conduct a comprehensive check of the chassis system. 4. Avoid emergency braking: Emergency braking not only impacts the breaking-in brake system but also increases the shock load on the vehicle's chassis and engine.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.