What is the fuel consumption of the GAC Trumpchi GS8?

2 Answers
VonMichael
07/24/25 3:49am
The average fuel consumption of the GAC Trumpchi GS8 is 11.03L. Here are the details: 1. The Trumpchi GS8 is equipped with a 2.0T engine, with a maximum power of 201 horsepower (148kW) and a peak torque of 320Nm, paired with an Aisin 6-speed automatic transmission; 2. Actual fuel consumption may vary depending on individual driving skills and habits, and a fluctuation of around 10% from the average is normal; 3. Different driving habits, road conditions, traffic congestion, load, fuel quality, use of air conditioning, whether the car is in the break-in period, or if it's an older vehicle can all affect fuel consumption. Generally, the comprehensive fuel consumption ranges from 8L to 10L.
Was this review help?
13
5
Share
DelMorgan
08/10/25 11:25pm
I've been driving the GAC Trumpchi GS8 for three years and would like to share my real fuel consumption experience: Mine is the 2.0T fuel-powered two-wheel-drive model. With frequent traffic jams during daily urban commuting, the fuel consumption generally ranges between 10 to 12 liters per 100 kilometers; it's much better on long highway trips, averaging only 7 to 8 liters. The official data states a combined fuel consumption of 8.5 liters, but the actual figure depends on your driving habits—occasional rapid acceleration or using the air conditioning can increase consumption by 1 to 2 liters. The GS8 is an SUV with higher wind resistance, offering strong power but not particularly fuel-efficient, slightly higher than the Toyota RAV4. For fuel-saving tips, smooth driving and regular maintenance help a lot. I spend around 1,000 yuan per month on fuel, which is generally acceptable—it's suitable for family use but don't expect it to be too economical.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

How to deal with unclear display of the Haval H6 tire pressure gauge due to water ingress?

The methods to deal with unclear display of the Haval H6 tire pressure gauge due to water ingress are: 1. Replace the dashboard; 2. Check if the tire pressure detector is loosely connected. Taking the 2021 Haval H6 as an example, it is a compact SUV with body dimensions of: length 4653mm, width 1886mm, height 1730mm, and a wheelbase of 2738mm. The 2021 Haval H6 features a McPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 211PS, a maximum torque of 325Nm, and a maximum power of 155kW, paired with a 7-speed dual-clutch transmission.
2
5
Share

What is the difference between a manual-automatic transmission car and an automatic transmission car?

The differences between a manual-automatic transmission car and an automatic transmission car are: 1. Different methods: A manual-automatic transmission car combines manual shifting and automatic shifting in one transmission system; an automatic transmission car uses an automatic transmission to adjust speed. 2. Different experiences: In a manual-automatic transmission car, the driver can freely adjust gears and RPM, offering flexibility and convenience; in an automatic transmission car, the driver does not need to manually adjust gears or RPM, making it more convenient and hassle-free. 3. Different characteristics: A manual-automatic transmission car requires higher maintenance costs and stricter usage requirements; in an automatic transmission car, when the gear lever is placed in the drive position and the brake pedal is released, the car moves forward as the throttle is applied and engine speed increases, with torque transmission increasing accordingly.
5
3
Share

What brand is the Leapmotor S01?

Leapmotor S01 is a model under the Leapmotor brand, which is a compact car. Taking the 2021 Leapmotor S01 as an example, its body dimensions are: length 4075mm, width 1760mm, height 1380mm, with a wheelbase of 2500mm and a trunk capacity ranging from 237 to 690 liters. The 2021 Leapmotor S01 features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension, with electric power steering. It is equipped with a permanent magnet synchronous motor, delivering a total motor power of 125kW and a total motor torque of 250Nm, paired with a single-speed fixed gear ratio transmission.
14
0
Share

How Often Should the Throttle Body Be Replaced?

The throttle body does not have a specified replacement interval and should only be replaced when it is damaged. Below are specific details about the automotive throttle body: 1. A dirty throttle body can cause idle vibration: When the air conditioning is turned on, the compressor also operates. Since the compressor is driven by the engine, its operation increases the engine load, which in turn increases the throttle opening and the intake air volume. If the throttle body is not maintained for a long time, carbon deposits can easily form. These deposits can obstruct the engine's air intake, making it difficult or barely sufficient for the engine to drive the compressor, resulting in idle vibration. 2. Regular cleaning of the throttle body: If the driving environment is harsh, it is best to clean the throttle body regularly, recommended every 10,000 kilometers.
19
2
Share

What is the 12 o'clock position on a steering wheel?

The 12 o'clock position refers to the reference point. The 12 o'clock position on a car steering wheel is located at the very top of the steering wheel. Here is some related information: 1. Steering wheel: The steering wheel is used to control direction and, as a safety component, plays a crucial role in the safety of the vehicle and its occupants. The steering wheel frame is typically made of magnesium-aluminum alloy, which is lightweight and has good performance indicators. The main parts include foam padding, leather wrapping, and wood inlays. 2. Types: Steering wheels generally come in two types: with airbags and without airbags. Steering wheels without airbags have an additional fork structure at the bottom, which enables the turn signal to reset. Steering wheels with airbags achieve this function by installing a clock spring at the lower part. The horn on the steering wheel comes in two types: floating and button-style.
20
1
Share

What are the reasons why a manual hydraulic jack cannot lift?

There are several reasons why a manual hydraulic jack cannot lift: 1. Lack of hydraulic oil: Simply add sufficient hydraulic oil. 2. Insufficient oil purity: Remove the hydraulic cylinder and clean any impurities from the contact surface between the base plate and the 7mm diameter steel ball. 3. Adjustment screw is too tight: If the adjustment bolt is too close or the adjustment screw is too tight, the valve will remain open. Replace the O-ring seal. 4. Air in the hydraulic cylinder: Seek a repair technician based on the actual situation. 5. High-precision honed tube: The hydraulic cylinder of the manual hydraulic stacker uses high-precision honed tubes, imported oil seals, and an integrated valve core for easy disassembly and maintenance. The pressure relief method is foot-operated, ensuring stable lifting speed and greatly improved safety.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.