What is the fuel consumption of the GAC Trumpchi GS5?

1 Answers
LeRiver
07/30/25 4:45am
The MIIT comprehensive fuel consumption is 6.6 to 9.4L/100km, and the official fuel consumption is 6.6L/100km. Fuel consumption per 100 kilometers parameter: Fuel consumption per 100 kilometers refers to the fuel consumption of a vehicle traveling a certain speed on the road for 100 kilometers, which is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then traveling at a specified speed to calculate the theoretical experimental fuel consumption data of the model per 100 kilometers. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated by repeatedly testing the values measured when the vehicle travels at specified speeds and times on designated roads, also known as multi-condition road cycle fuel consumption.
Was this review help?
13
5
Share
More Forum Discussions

What is the fuel consumption of the Reiz?

The comprehensive fuel consumption of the Reiz is approximately 11 liters per 100 kilometers. Here is some relevant information about the Reiz: 1. Exterior Design: The exterior design of the REIZ Reiz is captivating. It achieves a dynamic and elegant beauty with the best body proportions, combining the grace and luxury unique to high-end sedans. The body surface is glossy, vibrant, and full, breaking through the traditional concept of vehicles in its class. It creates a futuristic and mesmerizing appearance. 2. Interior Space: The Reiz surpasses its peers in terms of premium feel. It pursues the perfect interior space of the REIZ Reiz, illuminated by self-luminous instrument panels. The dark instrument panel paired with a silver center console sets a sporty and fashionable tone. While the design may not stand out in terms of shape, it relies on meticulous detailing to create the right ambiance.
17
1
Share

Is Engine Cleaning Necessary for the First Maintenance?

The first maintenance engine cleaning is not necessary. Here are the specific details about the first maintenance items: 1. Mileage: Follow the time and mileage requirements in the manual (whichever comes first). 2. Three Filters: Change the engine oil, oil filter, and air conditioning filter. 3. Check Fluids: Inspect the brake fluid, antifreeze, and power steering fluid for any shortages and top up if needed. 4. Check Chassis: Examine the chassis and suspension for any abnormalities or looseness (including tire pressure). 5. Check Lights: Ensure all lights are functioning properly and measure the battery voltage to confirm it is normal. 6. Cost: The above items are generally free of charge, and it is advisable to make an appointment in advance.
12
4
Share

What to Do When Visibility is 50 Meters on the Highway?

On the highway with visibility of 50 meters, slow down and drive cautiously; turn on the hazard lights, fog lights, and high beams, which means all lights should be on. Here is some information about high beams: 1. Definition: The intensity of the light is adjusted based on the distance of the filament. The high beam focuses its light, emitting parallel rays that are more concentrated and brighter, allowing illumination of distant and high objects. 2. Function: The low beam focuses its light beyond its focal point (between 1x and 2x the focal distance), emitting divergent light that illuminates a larger area of nearby objects. 3. Usage: When driving at night on highways without streetlights or in rural areas without illumination, high beams can be used to expand the field of vision. However, when encountering oncoming traffic, it is advisable to switch to low beams for safety and courtesy.
18
4
Share

Unable to start when hot but starts after cooling down?

Unable to start when hot but starts after cooling down may be caused by fuel injector leakage, damaged carbon canister solenoid valve, or poor fuel quality. Here are the specific explanations for this issue: 1. Fuel injector leakage: While normal fuel injection is expected, leakage constitutes additional fuel supply. The more severe the injector leakage, the richer the air-fuel mixture becomes, leading to difficulty starting when hot. 2. Damaged carbon canister solenoid valve: During hot starts, fuel atomization is normally sufficient without additional vapor supply. If the carbon canister continues supplying vapor to the intake, it creates an over-rich mixture, making starting difficult. 3. Poor fuel quality: After hot shutdown, the engine compartment remains quite hot. If the fuel is highly volatile, it can form excessive vapor pressure in the fuel rail. When this pressure exceeds the fuel system's pressure, vapor lock occurs, causing excessively lean fuel vapor injection and resulting in starting difficulties.
16
2
Share

What is the standard illumination distance for car low beams?

Car low beams typically have a standard illumination distance of approximately 30-40 meters, with the beam cutoff line around 12-18 meters. If the illumination distance is too short, the visibility at night will be reduced, which is detrimental to driving safety. Precautions for using car lights: When driving at night with streetlights on, or in conditions of low visibility such as fog, rain, snow, dust, or hail, the headlights, position lights, and tail lights should be turned on. On roads without central barriers or centerlines, when meeting another vehicle at night, switch to low beams when the oncoming vehicle is more than 150 meters away. Additionally, low beams should also be used when meeting non-motorized vehicles on narrow roads or bridges. If a vehicle breaks down or is involved in an accident on the road, obstructing traffic and making it difficult to move, the hazard warning lights should be activated, and a warning sign should be placed 50 to 100 meters behind the vehicle. At night, the position lights and tail lights should also be turned on simultaneously.
16
3
Share

Why is there a buzzing sound in the front of a Tesla after turning it off?

This is a normal phenomenon designed to prevent the engine from "seizing up" due to rapid cooling after shutdown. Relevant explanations are as follows: 1. Engine Seizure: After driving for a period, various engine components reach high temperatures. If the car is parked immediately, parts like the cylinder and piston rings or the crankshaft and connecting rods may "stick" together due to the high heat. Upon the next startup, this can lead to a condition commonly referred to as "engine seizure or bearing failure." Therefore, after prolonged driving, it is recommended to let the car idle for a few minutes before shutting it off to allow the engine temperature to decrease naturally. 2. Automatic Cooling Function: The vehicle is equipped with an automatic cooling function. If the engine temperature remains high after parking, the system will automatically activate the fan to continue cooling the engine until the temperature drops to a reasonable level, at which point the fan will stop. This is a normal occurrence.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.