What is the fuel consumption of the GAC Trumpchi GS4 Plus?

1 Answers
SanRylee
07/29/25 3:41pm
1.3T has an average fuel consumption of 6.5L per 100 km, while 1.5T has an average fuel consumption of 7L per 100 km. Factors affecting fuel consumption: 1. Driving habits: A car's fuel consumption is closely related to the driver's driving habits. If the driver frequently engages in aggressive driving, sudden acceleration, or sudden deceleration during driving, it will affect the car's fuel consumption. Statistics show that incorrect driving habits can increase fuel consumption by 5-30%. 2. Tire pressure: The car's fuel consumption is also directly related to tire pressure. For models without tire pressure monitoring displays, many car owners tend to overlook the importance of tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase.
Was this review help?
15
5
Share
More Forum Discussions

What does the car check light mean?

Car check light is the engine indicator light, which is used to display the working condition of the engine. When you turn on the ignition key and the vehicle performs self-check, this indicator light will illuminate and then automatically turn off. If it stays on constantly, it indicates that there is a fault in the vehicle's engine that requires inspection and repair. The illumination of the fault light caused by poor operation of the car engine system, such as throttle pedal sensor, throttle position sensor, air flow meter, crankshaft position sensor faults or poor line contact, etc., will all cause the engine fault light to illuminate. Generally, when this type of fault light is on, it will also lead to poor acceleration and other conditions. Sometimes, after turning off the key and restarting, the vehicle can be used normally, but the fault light remains on.
20
2
Share

What does 'push' mean in cars?

In automotive terminology, 'push' represents the action of pressing. It carries three specific meanings in vehicle systems: 1. The 'push' button at the center of the air direction control knob - when pressed with its light illuminated, it activates rear window defrosting; 2. The 'push' button at the center of the temperature control knob - when pressed with its light on, it enables air recirculation mode; 3. 'Push' functionally serves as the parking brake. The professional term for parking brake is auxiliary brake, which operates differently from service brakes by using steel cables connected to rear brake shoes to immobilize the vehicle. Prolonged use of parking brakes may cause plastic deformation in the cables. As this deformation is irreversible, chronic usage will gradually reduce effectiveness and increase the brake lever travel distance. The parking brake system also incorporates return springs - stretching when engaged and returning to original length when released.
2
0
Share

What is the button on the right B-pillar of the Audi A6L?

The button on the right rear B-pillar of the 2016 Audi A6L is a negative oxygen ion generator. When activated, the air vent on the B-pillar will release negative oxygen ions. Below is an introduction to the Audi A6L: 1. Introduction one: The Audi A6L was the first Audi model to enter the Chinese market, with its predecessor being the third-generation Audi 100 (code-named C3) introduced in 1988. 2. Introduction two: The Audi A6L is a vehicle series developed by FAW-Volkswagen Audi based on the German new A6, serving as the successor to the A6. In June 2012, the redesigned Audi A6L was launched, equipped with a 35 TFSI powertrain, and its exterior design somewhat resembled the new version of the A4L. 3. Introduction three: On August 26, 2017, the Audi A6L 30th Anniversary Edition debuted at the 2017 Chengdu International Auto Expo and was officially launched during the event.
16
3
Share

What Causes Severe Body Shaking in BMW Vehicles?

Analysis of the causes for severe body shaking in BMW vehicles is as follows: 1. Severe engine carbon buildup: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making ignition difficult. Under these conditions, the vehicle will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The fluctuating lean and rich conditions of the engine's combustible mixture lead to idle shaking after a cold start. 2. Unstable oil pressure: It is advisable to visit a 4S shop to check whether the fuel supply pressure and the intake pressure sensor are functioning normally. If the fuel pump's supply pressure is abnormal or the intake pressure sensor's readings are incorrect or malfunctioning, it can also cause body shaking.
1
5
Share

What are the devices in the car?

The devices in the car are referred to as automotive electronics, which is a general term for vehicle body electronic control devices and onboard automotive electronic control devices. Vehicle body electronic control devices include the engine control system, chassis control system, and body electronic control system (Body Electronic ECU). Additional Information: 1. Classification: Based on their impact on vehicle driving performance, automotive electronic products can be categorized into two types: automotive electronic control devices and electronic devices. 2. Automotive Electronic Control Devices: These devices need to work in conjunction with the vehicle's mechanical systems, forming so-called "electromechanical integrated" automotive electronic devices. They include engine, chassis, and body electronic controls, such as electronic fuel injection systems, anti-lock braking control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, and electronic power steering systems. 3. Onboard Automotive Electronic Devices: These are electronic devices that can operate independently in the automotive environment and are not directly related to the vehicle's performance. They include automotive information systems (on-board computers), navigation systems, car audio and TV entertainment systems, in-vehicle communication systems, and internet devices.
9
4
Share

Where is the place to renew the driver's license in Baoshan District?

Drivers in Baoshan District who want to renew their driver's license can go to the driver's license management window of the Baoshan District Vehicle Management Office in Shanghai. The following is an introduction to the required documents: 1. ID card copy: Provide a copy of the ID card of the driver's license holder. 2. Color digital photos: Provide 2 one-inch white background color digital photos of the driver's license holder. 3. Physical examination certificate: The driver's license holder's own physical condition qualification certificate. For non-local motor vehicle drivers, a physical examination invoice provided by the hospital is also required. 4. Original driver's license: Provide the original driver's license. If the original driver's license is lost, the driver's license holder needs to write a written statement of loss of the driver's license. 5. Fees: Pay the corresponding fees and postage fees.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.