What is the fuel consumption of the GAC Trumpchi GS4 automatic transmission?

3 Answers
MacNorah
07/29/25 9:13am
GAC Trumpchi GS4 automatic transmission fuel consumption is 6.5L/100Km. The following are the specific details of the GAC Trumpchi GS4: 1. Intelligence: The GAC Trumpchi GS4 is equipped with L2-level intelligent driving assistance technology, and the vehicle features an ultra-sensory interactive intelligent cockpit, enabling OTA upgrades, fatigue monitoring, automatic window closing in rain, remote air conditioning scheduling, and active ventilation. 2. Power: It is powered by a 1.5T turbocharged engine with a maximum net power of 169 horsepower, offering three transmission options: a 6-speed manual, a 7-speed wet dual-clutch, and a 6-speed automatic transmission.
Was this review help?
18
1
Share
JaxonLynn
08/12/25 8:55am
I've been driving the GAC Trumpchi GS4 automatic transmission for a while now. The fuel consumption of this SUV is roughly between 7 to 9 liters per 100 kilometers in daily use, depending on the situation. In stop-and-go city traffic with frequent congestion, it can go up to around 9 liters, while on the highway with smooth driving, it drops back to 6-7 liters, which is quite reasonable. My daily commute involves a lot of red lights, leading to higher fuel consumption, but on weekend trips on the highway, the fuel efficiency feels well controlled. If you drive steadily, avoid sudden acceleration and braking, you can save quite a bit on fuel; turning the AC up or carrying more load can increase consumption by about 0.5 liters. Compared to its peer, the Haval H6, the GS4's fuel consumption is slightly lower, thanks to the tuning of its 1.5T engine, making it quite suitable for family use. When fuel prices fluctuate significantly, I find its performance to be average, but maintaining proper tire pressure and oil condition can help optimize fuel efficiency.
Was this review help?
3
3
Share
Expand All
DelEvan
10/06/25 4:24am
As an experienced driver, I've had the chance to test drive the GAC Trumpchi GS4 automatic transmission model. The official combined fuel consumption is rated at 7.5 liters per 100 kilometers, but in real-world driving, it fluctuates around 8 liters. In congested city traffic, it can go up to 9 liters, while on highways or national roads, it's just over 6 liters, making it quite economical and practical. Fuel consumption is significantly affected by driving habits – rapid acceleration or frequent braking can make the fuel gauge drop faster. Driving more gently usually helps save some money. Factors like air conditioning usage and vehicle load can't be ignored either; in summer, running the AC with a full load can increase consumption by nearly 1 liter. Regular maintenance is crucial – for example, changing the air filter helps maintain engine efficiency and prevents sudden spikes in fuel consumption. Compared to similar models like the Geely Boyue, the GS4 performs similarly, making it suitable for commuters or families, though actual driving conditions can introduce variables.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What is the tire pressure of a car spare tire?

The tire pressure of a car spare tire is between 2.3 and 2.5 bar. During driving, if the tire pressure is too high or too low and encounters sharp objects, the vehicle tire may have a blowout phenomenon. If the vehicle is driving at high speed, a blowout may cause serious consequences, which can not only damage the vehicle but also cause harm to people. The method of replacing a car spare tire: 1. Take out the spare tire and jack; 2. Use the jack to lift the vehicle; 3. Unscrew the tire bolts and remove the tire to be replaced; 4. Align the spare tire bolt holes and install the bolts; 5. Remove the jack, and the car spare tire replacement is completed.
7
4
Share

How to Set Up One-Touch Window Control in Sagitar?

The method to set up one-touch window control in Sagitar: Raise the window glass fully upward, then hold the switch for 3 seconds. Next, lower it completely and hold for 3 seconds. Repeat this process three times to complete the setup. The Sagitar comes standard with one-touch window control across all trims, which refers to a system allowing car windows to be fully opened or closed with a single button press. Taking the 2021 Sagitar Manual Fashion Smart Connect Edition as an example, its body dimensions are 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm and a fuel tank capacity of 50 liters. This model is equipped with a 1.2T turbocharged engine delivering a maximum power of 85kW.
15
1
Share

How long after passing Subject 1 can you schedule Subject 4?

You cannot directly apply for Subject 4 after passing Subject 1. You must pass Subject 1, Subject 2, and Subject 3 before you can apply for Subject 4. Below is detailed information about the Subject 4 exam: 1. Overview: Subject 4, also known as the theoretical exam for drivers, is part of the motor vehicle driver's license assessment. The test consists of 50 questions, primarily in the form of case studies, images, and animations, with a full score of 100 and a passing score of 90. 2. Additional Information: Subject 4 separates the requirements related to safe and civilized driving from Subject 1, including safe driving skills under complex conditions and emergency handling knowledge. These are tested after the "Subject 3" practical road driving exam to further assess the candidate's traffic awareness and competence.
18
2
Share

What does a bulb with an exclamation mark on the dashboard mean?

Vehicle dashboard has a bulb with an exclamation mark is the lighting fault indicator, when this indicator lights up, it indicates that there is a fault with the exterior light bulbs, such as brake lights, license plate lights, width indicators, reverse lights, etc. being damaged, or loose connections. It is recommended to go to a 4S store for inspection and repair as soon as possible. The method for replacing car bulbs is: 1. Open the engine hood and locate the lamp cover behind the headlight assembly; 2. Unscrew the lamp cover; 3. Pull out the lamp socket with the power cord, pressing the bulb with your hand to avoid damage; 4. Release the lamp socket clip to remove the bulb, then install the new bulb. When reinstalling the lamp cover, make sure it is tightly screwed to prevent rain and dust from affecting the headlight's lifespan.
20
0
Share

Working Principle of a Four-Wire Brake Light Switch?

Four-wire brake light switches essentially consist of two switches in one: a normally open (NO) switch and a normally closed (NC) switch. When the brake pedal is pressed, the normally open switch closes (conducts), while the normally closed switch opens (stops conducting). Below are details regarding four-wire brake light switches: 1. Overview: A four-wire automotive brake light switch has one 12V power supply wire, two wires sending brake signals to the ABS system ECU and automatic transmission ECU respectively, and another wire leading to the rear brake indicator light. In some high-end models, the ABS and automatic transmission share a single wire, with an additional wire added for electronically controlled suspension brake signals. Thus, apart from the power wire, all other wires on the brake light switch connect to control units requiring brake signals, while the rear brake indicator is controlled by the vehicle's lighting system. 2. Testing Method: To check the functionality of a four-wire brake light switch, a multimeter is required. Set the multimeter to the diode test mode. Use the red and black probes to measure between the pins. If any two pins show continuity, they are the normally closed contacts. The remaining two pins are the normally open contacts.
14
5
Share

What is the reason for the car not starting and making abnormal noises?

The battery is faulty and cannot store power. If you can only hear the sound of the starter when trying to start the car, it is likely that the battery is dead and unable to start the car. The starter motor may also be faulty and unable to turn the flywheel. Check if the starter motor is working when attempting to start the vehicle. The reasons for the car not starting and making a clicking sound are as follows: 1. First scenario: If the car initially starts without issues but the starting time gradually increases until it suddenly fails to start one day, this is likely due to a problem with the engine's ignition system or fuel supply system. In this case, it is necessary to seek professional repair services. 2. Second scenario: If the car has always started well but suddenly fails to start one day, it is likely a battery issue, where the battery is dead and cannot supply power normally. 3. Third scenario: If the headlights can function normally, it is mostly due to an open circuit in the protective coil of the starter motor's solenoid switch.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.