···
Log in / Register

What is the fuel consumption of the GAC GS4?

3 Answers
PrestonMarie
08/31/25 8:09am
The actual fuel consumption of the GAC Trumpchi GS4 is approximately 8 to 9 liters per 100 kilometers. How to calculate car fuel consumption: Fill up the car's gas tank completely and reset the trip meter to zero. After driving for a certain period, refill the tank and note the amount of fuel added. Then, divide the amount of fuel added by the distance traveled to get the fuel consumption per kilometer. Reasons for high fuel consumption: The driver's skill level, improper gear shifting and excessive braking during driving can artificially increase engine power loss. Additionally, frequent braking leads to more starts, as fuel consumption is significantly higher during acceleration. Driving at low temperatures: cars require the engine to operate at normal temperatures. If the car is driven without proper warm-up, the engine remains at a low temperature, resulting in poor fuel atomization and incomplete combustion.
Was this review help?
11
2
Share
Murphy
09/13/25 4:21am
I think the fuel consumption of the GAC GS4 is quite reasonable. In city driving, I average around 9 liters per 100 kilometers, and on the highway, it can drop to 7 liters. Overall, the mixed fuel consumption is just over 8 liters. But remember, fuel consumption varies from person to person. If you frequently accelerate aggressively or get stuck in traffic, the fuel consumption might spike to 10 liters; on the other hand, smooth driving can keep it under 8 liters. Factors like vehicle weight, frequency of air conditioning use, and cargo load also affect it. For example, using the air conditioning in summer can easily increase fuel consumption by 0.5 liters. I've been driving this SUV for over a year, and it's relatively fuel-efficient compared to other vehicles in its class. Filling up the tank can easily get you 500 kilometers. I recommend keeping an eye on tire pressure and engine oil condition, as these small details can help maintain stable fuel consumption.
Was this review help?
7
1
Share
Expand All
VanHayden
10/27/25 5:08am
From my understanding of automotive technology, the 1.5T turbocharged engine in the GAC GS4 is quite efficient, and when paired with the dual-clutch transmission, it maintains an average fuel consumption in the range of 7-8 liters. However, in actual city driving with traffic congestion, it can rise to 9 liters, only dropping back during highway cruising. The key factors affecting fuel consumption are driving style, road conditions, and engine load—for instance, frequent starts and stops can lead to higher fuel consumption. Additionally, the car's electric power steering system and smart start-stop technology help reduce energy consumption. Based on my daily driving experience, on average, a full tank can cover about 550 kilometers, making it quite suitable for medium to long-distance trips. I recommend regular maintenance checks on the intake system and spark plugs to ensure the engine runs smoothly and fuel consumption doesn't increase.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What to do if the fuel tank cap of Mercedes-Benz GLE won't open?

This situation is relatively common. You can insert a small wooden piece into the gap of the fuel tank cap to pry it open. Remember to pull the fuel tank cap's latch switch while prying. You can open the trunk. On the side of the fuel tank cap, there is usually an interior panel that can be opened, typically secured with just a few plastic clips, making it easy to access. You can install a small spring (not too soft or too long) on the protruding rubber pad of the fuel tank to increase the elasticity between the fuel tank cap and the locking mechanism. Apply lubricating grease to the hinges and the engagement points of the fuel tank cap.
3
3
Share

How is the oil film on the windshield formed?

Reasons for the formation of oil film on car glass: automobile exhaust, oil smoke pollution, as well as insect carcasses, bird droppings, resin, or fruit jam. The oil film is a layer of oily substance formed by various pollutants adhering to the surface of the car glass. This layer is extremely stubborn and generally difficult to remove. However, if not treated in time, it will inevitably affect driving. Causes of oil film formation: Automobile exhaust: Automobile exhaust can adhere to the car glass, forming an oil film. Oil smoke pollution: If oil smoke and dirt are not treated for a long time, they will form oil stains. Insect carcasses, bird droppings, tree gum, or fruit jam: Insect carcasses and bird droppings are highly corrosive. If not cleaned from the glass, they will adhere and harden, turning into an oil film. Methods to remove oil film: Use a dedicated oil film cleaner, spray the cleaner evenly on the glass, and clean and wipe it with a car wash towel or sponge. Use toothpaste for cleaning. Toothpaste contains abrasive particles that can have a grinding effect. Evenly applying it to the glass can clean the surface pores of the glass and remove the oil film. Use an eraser, car wash clay, or newspaper for wiping and cleaning. The eraser and car wash clay can remove the oil film, while newspaper has a certain oil-absorbing effect. Dipping it in water and wiping repeatedly several times can also remove the oil film.
16
1
Share

What are the test items for the Category 2 driving test for small cars?

The Category 2 driving test for small cars includes reverse parking, hill start, parallel parking, curve driving, and right-angle turns. Below are the relevant details: 1. Mastering the basics: The Category 2 test requires learners to grasp the fundamental driving operations and possess basic vehicle control abilities. They must be proficient in basic methods of driving on the test site and roads, capable of properly using vehicle controls, accurately managing the vehicle's spatial position, and precisely controlling the vehicle's position, speed, and route. 2. Failing the test: If a candidate fails the Category 2 test, they must first pay a retest fee at the vehicle management office. According to Article 37 of the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses,' each test can be taken once, and if failed, a retest is allowed once.
13
3
Share

What is the method for removing a timing belt?

Timing belt removal method: 1. Lift the car with a jack; 2. Remove the engine bottom plate; 3. After removing the bottom plate, the timing belt becomes visible; 4. Remove the exposed old timing belt; 5. Install a new timing belt; 6. Timing belt replacement completed. The function of the timing belt is to transmit the crankshaft's force to drive components such as the water pump and charging generator. The installation method for the timing belt is: 1. Loosen the generator fixing screw and the timing belt tension adjustment screw; 2. Push the generator towards the engine to minimize the distance between the timing pulleys, then properly position the timing belt; 3. Adjust the timing belt tension to the appropriate level, and tighten the engine fixing screw and adjustment screw.
20
5
Share

How is the matching between car gears and speed?

Car gear and speed matching involves starting in first gear, shifting to second gear at around 10 km/h, third gear at 20 km/h, fourth gear at 45 km/h, and fifth gear at 60 km/h. When the speed corresponds to the gear, the car's operating performance is at its best, and the thermal efficiency of the fuel is highest. If the speed does not match the gear, such as high speed with low gear or low speed with high gear, it not only increases fuel consumption but also causes damage to the engine and transmission, leading to irreversible harm to the vehicle. Therefore, it is essential to maintain the appropriate gear and speed matching while driving. Notes on gear shifting: For beginners, in addition to mastering the timing of gear shifting as quickly as possible, it is also necessary to learn the hand gestures for shifting. When shifting gears, keep the five fingers together, lightly grip the gear knob, and use the forearm to guide the hand in shifting. Be gentle and slow when shifting, avoiding excessive force to prevent shifting into the wrong gear. Always pause in neutral before shifting, and if you shift into the wrong gear, don’t panic—simply return to the original gear and shift again. Introduction to automatic transmission gears: Automatic transmission gears include P (Park), R (Reverse), N (Neutral), D (Drive), and B (Brake). P is for parking and is used for long-term parking, R is for reversing, N is neutral and used for short stops like at traffic lights, D is the automatic driving gear where the computer shifts gears automatically, and B is the braking gear.
20
0
Share

Will water enter if there is a gap in the rearview mirror housing?

Water can enter if there is a gap in the rearview mirror housing. The adjustment method for the rearview mirror is as follows: 1. Adjust the horizon reflection in the left rearview mirror to the center of the mirror; 2. Adjust the reflection of the left side of the vehicle to occupy the right quarter of the mirror; 3. Adjust the horizon reflection in the right rearview mirror to two-thirds of the mirror's height; 4. Adjust the reflection of the right side of the vehicle to occupy the left quarter of the mirror. The function of the rearview mirror is to reflect the conditions behind, beside, and below the vehicle, allowing the driver to indirectly see these areas clearly, expanding the driver's field of vision, and enhancing safety during reversing and driving.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.