···
Log in / Register

What is the fuel consumption of the G-Class?

4Answers
Olga
07/23/2025, 09:08:29 PM

The following is an introduction to the fuel consumption of the G-Class: 1. The Mercedes-Benz G-Class has a fuel consumption of approximately 18.5 liters per 100 kilometers. With aggressive driving, the fuel consumption can easily exceed 20 liters per 100 kilometers. 2. The Mercedes-Benz G-Class is a rugged off-road vehicle from Mercedes-Benz, equipped with a 4.0-liter twin-turbocharged V8 engine, paired with a 9-speed automatic transmission. 3. The fuel consumption of a car varies slightly depending on each driver's habits and skills. A smoother driving style results in lower fuel consumption, while aggressive driving, frequent overtaking, and high-RPM operations will appropriately increase fuel consumption. Additional information: The following are methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance may lead to higher fan speeds and lower temperatures to achieve a cooling effect. 2. Frequent hard braking: Frequent hard braking is a primary reason for persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement vehicles: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately upon entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside the vehicle. After the vehicle has cooled down moderately, then turn on the air conditioning.

Was this review help?
119
Share
AnthonyMarie
08/10/2025, 04:34:17 PM

Actually, few G-Class drivers keep an eye on the fuel consumption gauge, but since you asked, my long-term real-world data shows: the G500 typically starts at 16-18L/100km in city driving, while highway mileage can drop to around 12L. Last time I took a friend’s modified G63 with all-terrain tires off-roading, the meter jumped straight to 23L/100km—the roaring engine sounded like burning money. But people who buy this car care more about its three differential locks and chassis. The boxy design creates high drag, and the V8 engine is particularly thirsty—the 100L fuel tank exists precisely to minimize gas station visits. If fuel efficiency is a priority, the G-Class isn’t for you; it exists to conquer rough terrain.

Was this review help?
17
Share
Expand All
AsherLynn
08/10/2025, 04:36:14 PM

There's an old G350d parked in my underground garage, and the dashboard shows 14.5L diesel consumption during daily commutes. Once I chatted with a neighbor who drives a G500, and he said it easily exceeds 20L gasoline in traffic jams. The fuel consumption of the G-Class varies greatly depending on the version, with the diesel version saving about one-third. After the facelift, the G500 was equipped with a 48V mild hybrid system, which can shut down four cylinders during start-stop, but it only saves about 0.5L. The key point is that this car weighs 2.5 tons, has a high drag coefficient of 0.44 due to its tall body, and very wide tires. These physical characteristics alone make it inherently fuel-thirsty. If you're really considering buying one, I'd recommend the diesel version—its fuel tank can last up to 900 km on long trips.

Was this review help?
4
Share
Expand All
LaSimon
05/09/2026, 03:46:25 AM

That trip to the Alxa Hero Festival in the G-Class taught me a lesson: factory tires gave 25L/100km in the desert, while mud tires pushed it to 28L. With these hardcore off-roaders, never trust the official 14L/100km rating - expect 20L in traffic and 30L off-road. There's a reason Mercedes fits massive fuel tanks, and the G63 manual specifically requires 98 octane. Be wary of used units with ECU tunes - unlocking full V8 potential adds 15% more fuel consumption. If fuel economy matters, just rent one for a few days.

Was this review help?
2
Share
Expand All
More Q&A

What are the reasons for no response when pressing the Mercedes car key?

If the car does not respond when the key is pressed, it could be due to a dead battery in the car key or signal interference near airports or wireless transmission towers. Additionally, the vehicle might not respond if it is out of fuel or has a dead battery. If the anti-theft system is activated and cannot be unlocked, you can use the mechanical key on the remote key to open the door. For remote keys damaged by water immersion, they generally cannot be repaired. It is recommended to match a new car key and disable the old one. Here are some additional tips: Precautions: When installing the battery, be sure to pay attention to the positive and negative terminals and avoid reversing them. If the key does not work after replacing the battery, it might be due to incorrect battery installation. Typically, remote control batteries are clipped together; you can pry them open by finding the right spot. If you cannot locate it, it is advisable to have an experienced technician replace it to avoid damaging the key.
108
Share

Why can't the front wheels go up when reversing onto a step?

Reversing onto a step with the front wheels unable to go up is due to insufficient power and not giving enough throttle. Here are some precautions regarding car driving: 1. Cold car warm-up: Proper warm-up helps the engine oil form an "oil film" between engine components, thereby reducing wear. 2. Timely gear shifting: When driving a manual transmission car during the break-in period, shift gears promptly and appropriately to avoid incorrect behaviors like high gear with low RPM or low gear with high RPM, and do not use a single gear for too long. 3. Timely maintenance: Simply follow the manufacturer's recommendations in the vehicle manual, and after reaching a certain mileage or time, promptly inspect and maintain the vehicle, replace engine oil, oil filter, etc., and conduct a comprehensive inspection of the chassis system. 4. Avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the impact load on the vehicle chassis and engine.
116
Share

What is the normal value of idle injection pulse width?

When the engine is idling normally at operating temperature, the pulse width is generally between 1.5ms and 2.9ms. Below are specific details about injection pulse width: 1. Overview: Injection pulse width refers to the duration of each injection controlled by the engine's computer, and it is the most important indicator of whether the fuel injector is functioning properly. Since the fuel pressure in the engine's fuel system is constant, the flow rate during injection is also constant. Therefore, the amount of fuel injected can only be controlled by the duration of the injection. In electronic fuel injection engines, the injector is controlled by a solenoid valve to open and close. Given the high engine speed, the injection time is very short. As a result, the ECU sends a very brief pulse signal for injection, and the time width of this signal is the injection pulse width. 2. Range: The unit of measurement for injection pulse width is milliseconds (ms). A higher displayed value indicates that the injector remains open longer for each injection, resulting in a richer air-fuel mixture for the engine. Conversely, a lower displayed value means the injector remains open for a shorter duration, leading to a leaner air-fuel mixture. There is no fixed standard for injection pulse width; it varies depending on engine speed, load, and intake air volume. The ECU calculates or queries a database based on these parameters to determine the specific injection pulse width value. Generally, the pulse width ranges between 1.5ms and 2.9ms.
119
Share

What to Do If the Highway ETC Fails to Deduct Fees?

Here are the reasons why ETC may not deduct fees when exiting the highway: 1. Driving too fast may cause the deduction to fail. 2. If this is the reason, the deduction will be made up during the next recharge. ETC has the following two payment methods: 1. Postpaid method. 2. Immediate deduction method. 3. If the fee was not deducted immediately, it might be the postpaid method, in which case the fee will be deducted periodically. Here are some features of ETC: 1. The non-stop toll collection technology is suitable for highways or busy bridge and tunnel environments. 2. Electronic highway tolling can reduce the cost of toll management, improve vehicle operational efficiency, and significantly reduce noise levels and exhaust emissions at toll booths. 3. Since the traffic capacity is greatly improved, the scale of toll stations can be reduced, saving construction and management costs.
111
Share

How Many Months Does a New Car Need for the Break-in Period?

The break-in period for a new car refers to the initial driving distance after the car leaves the factory, allowing the engine components to wear in smoothly. The typical break-in mileage for a new car is between 1,000 kilometers and 3,000 kilometers. Below are some guidelines to follow during the break-in period: 1. Regarding speed, there is no need to maintain a constant speed, but avoid exceeding two-thirds of the maximum speed. Keep the engine RPM below 3,000-3,500 (requirements may vary by manufacturer). Avoid sudden acceleration and hard braking. 2. Do not overload the vehicle, and regularly check tire pressure, coolant, and brake fluid. 3. When driving downhill for long distances, control your speed and avoid suddenly using engine braking to slow down. For manual transmission models, anticipate gear shifts in advance and avoid shifting at inappropriate speeds.
110
Share

Where is the windshield washer fluid filler port on the CRV?

The windshield washer fluid reservoir of the Honda CRV is located in the lower left corner of the engine compartment, with a cap marked with a washer symbol. The Honda CRV's windshield washer fluid capacity is 4L, and it should be refilled appropriately based on the remaining amount. Windshield washer fluid is only consumed when used, so there is no fixed refill interval - simply refill when low. Below is the Honda CRV windshield washer fluid refill procedure: 1. First use the wiper switch knob to spray out the old windshield washer fluid. 2. After completely spraying out the existing fluid, locate the windshield washer fluid filler port and add a small amount of newly prepared fluid. 3. Activate the wiper switch again to clear out any remaining old fluid. 4. When the spray nozzles stop emitting fluid during the second activation, pour in 4 liters of windshield washer fluid, then securely close the cap to complete the refill process.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.