What is the fuel consumption of the fourth-generation Geely Emgrand?

2 Answers
MacCooper
07/29/25 4:57am
The fuel consumption of the fourth-generation Geely Emgrand is 5.3L/100km. Here are the details about the fourth-generation Emgrand: Powertrain Configuration: The fourth-generation Emgrand is the first sedan in the Emgrand family built on the BMA architecture. It is equipped with a newly optimized 1.5L naturally aspirated engine featuring DVVT technology, delivering a maximum power of 84 kW/114 hp and a peak torque of 147 Nm. Compared to the previous 1.5L engine, these figures represent an increase of 4 kW, 5 hp, and 5 Nm in torque. Chassis: For a new car, the tuning of the suspension directly determines the quality of the driving experience. The fourth-generation Emgrand features a front MacPherson independent suspension and a rear torsion beam non-independent suspension setup. This combination provides substantial improvements in lateral support and vibration damping performance. Particularly, the suspension is soft enough to handle bumpy road conditions smoothly without sacrificing adequate support for the vehicle body.
Was this review help?
13
4
Share
Esther
08/12/25 8:35am
As a frequent driver, I can say the official fuel consumption data for the Geely Emgrand 4th Generation generally ranges between 5.8 to 6.1 liters per 100 kilometers, depending on whether it's the manual or automatic transmission version. In actual driving conditions, it often fluctuates between 6.5 to 8 liters due to factors like urban traffic congestion, air conditioning usage, or sudden acceleration, which can drive up fuel consumption. I've driven this car on highways, and with smooth driving, it can be controlled to just over 6 liters. The engine and transmission seem well-designed for fuel efficiency, but poor maintenance can cause a noticeable increase in fuel consumption. For those looking to save on fuel, I recommend regular checks on tire pressure and air filters—the savings on fuel costs can add up significantly, making it well worth the effort.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

What are the causes of high pressure in car air conditioning?

The causes of high pressure in car air conditioning: 1. System blockage, mostly due to expansion valve blockage or malfunction, the solution is to replace the expansion valve; 2. Excessive refrigerant, the exhaust port feels hot to the touch and the suction port feels warm, normally these areas should feel cool, the compressor may occasionally make liquid impact sounds, the solution is to completely evacuate and quantitatively recharge the refrigerant; 3. Poor cooling of the condenser, the temperature of the pipeline from the condenser outlet to the expansion valve inlet feels hot to the touch, normally this section should feel warm, the solution is to clean the condenser and radiator grille of dirt, replace if necessary; 4. Expansion valve failure, the low-pressure pipe will have a large number of dew drops or frost, the solution is to check if the expansion valve is installed correctly, if correct, replace the expansion valve; 5. Other faults, such as cooling fan failure, engine overheating, excessive or insufficient refrigeration oil.
18
4
Share

The Impact of China VI Emission Standards on Used Cars

"China VI", fully known as the "China 6th Stage Emission Standard for Light-Duty Vehicles", is an emission standard system independently developed by China based on referencing emission standard systems from other countries and regions, combined with its own development realities. Due to its complexity and difficulty surpassing the "China V" standard, "China VI" is also referred to as the "world's strictest" emission standard within the industry. According to relevant regulations, the implementation of the "China VI" standard is divided into two phases: a and b. The first phase, starting from July 1, 2020, prohibits the sale, registration, and licensing of vehicles that do not meet the "China VIa" emission standard. The second phase, starting from July 1, 2023, prohibits the sale, registration, and licensing of vehicles that do not meet the "China VIb" emission standard.
20
5
Share

How to reset the tire pressure light on the 2018 Magotan?

Methods to reset the tire pressure light on the 2018 Magotan: 1. Start the car and locate the home button on the central display screen, then find the settings. After selecting the vehicle, the tire pressure monitoring system calibration will appear. Choose calibration to reset the tire pressure warning light; 2. During the car's startup, all warning lights on the dashboard will illuminate as the car performs a self-check. Once the self-check is complete, the warning lights will turn off. If the warning light remains on, it may indicate a fault that requires immediate inspection; 3. If the tire pressure warning light stays on, it suggests an issue with the car's tire pressure. If the warning message persists after calibration, it is recommended to check the tire pressure and perform the calibration again. If the issue cannot be resolved, take the car to a 4S shop for maintenance and inspection. The dimensions of the 2018 Magotan are 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2871mm.
19
3
Share

What is the displacement of 270t?

270t refers to a 1.5-liter displacement. The introduction to displacement and its classification is as follows: Introduction to Displacement: Displacement, a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. The displacement of a car is an important parameter in measuring a vehicle. Some domestic cars do not have the model number marked on the rear, but their displacement is usually indicated on the body or rear of the car. Displacement Classification: The classification of car levels in China is determined by the size of the displacement. Mini cars have a displacement of ≤1.0L; compact cars have a displacement ranging from 1.0 to 1.6L; mid-size cars have a displacement ranging from 1.6 to 2.5L; executive cars have a displacement ranging from 2.5 to 4.0L; and luxury cars have a displacement of >4.0L.
9
1
Share

What is the symbol for the water temperature gauge?

The water temperature gauge is generally a pointer-type indicator marked with the letters C and H, or uses white and red zones to represent the distinction between cold and hot. If the gauge approaches the red zone or H, the water temperature warning light will illuminate, indicating that the engine coolant temperature is too high. When the water temperature light is on: a blue light indicates the water temperature is too low, which is rare, and it will automatically turn off once the temperature rises. However, driving for extended periods with low water temperature can prevent the engine from reaching normal operating temperature, leading to poor lubrication and significant wear on internal components. When the water temperature warning light is red or yellow, it indicates the water temperature is too high. You should check if the coolant is low. If the coolant level is adequate, the issue might be due to a blocked water channel or radiator, poor water pump performance, or problems with the electric fan system.
2
4
Share

Does a slightly tilted car body count as passing in the reverse parking test of Subject 2?

In the Subject 2 driving test, if the car body is slightly tilted during reverse parking, as long as the car does not cross the lines and the wheels do not press on the lines, it is considered a pass. Below is some relevant information about Subject 2: Number of test attempts: You can take the Subject 2 test up to 5 times, and each time you fail, you have an immediate retake opportunity. If you fail all five attempts, you will have to re-enroll in the driving school, pay the fees again, and start from Subject 1. Test precautions: The Subject 2 test consists of five items: reverse parking, parallel parking, hill start, right-angle turn, and S-curve driving. During reverse parking, the most important thing is to observe the rearview mirrors and accurately gauge the distance between the rear wheels and the two lines in the mirrors.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.